• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.27 no.1
• /
• pp.13-20
• /
• 1991

This paper describes the fish-density dependence of the mean backscattering strength with aggregations of encaged, free-swimming fish of known density in relation to the experimental verification of echo-integration technique for estimating the density of fish shoals. In this experiment, various numbers of gold crussian, Carassius burgeri burgeri, with a mean length of 18.5cm and a mean weight of 205.9g, were introduced into a net cage of approximately 0.76m super(3). During the backscattering measurements. the cage was suspended on the sound axis of the 50kHz transducer having a beam width of 33 degrees at -3dB downpoints. The volume backscattering strengths from fish aggregations were measured as a function of fish density. Data acquisition, processing and analysis were performed by means of the microcomputer-based sonar-echo processor including a FFT analyzer. The calibration of echo-sounder system was carried out at field with a steel ball bearing of 38mm in diameter having the target strength of -40.8dB. The dorsal-aspect target strengths on anesthetized specimens of gold crussian used in the cage experiment were measured and compared with the target strength predicted by the fish density-echo energy relationship for aggregations of free-swimming gold crussian in the cage. The results obtained can be summarized as follows: 1. The target strengths in the dorsal aspect on anesthetized specimens of gold crussian, with the mean length of 19.1cm and the mean weight of 210.5g, varied from -40.9dB to -44.8dB with a mean of -42.6dB. This mean target strength did not differ significantly from that predicted by the regression of echo energy on fish density of free-swimming gold crussian in the cage. It suggests that the target-strength measurements on anesthetized fish was valid and can be representative for live, free-swimming fish. 2. The relationship between mean backscattering strength(, dB) and distribution density of gold $crussian(\rho, $ fish/m super(3)) was expressed by the following equation; =-41.9+11 $Log(\rho)$ with a correlation coefficient of 0.97. This result support the existence of a linear relationship between fish density and echo energy, but suggest that this line has steeper slope than the regression by the theory of estimating the density of fish schools.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.11 no.1
• /
• pp.51-56
• /
• 2012

Purpose: Golf is a popular sports activity after total knee arthroplasty in old age patients. We evaluated golf and implant loosening through the radiologic method. We also evaluated correlation of patterns of golf activity and clinical outcome to suggest guidelines to the patients. Materials and Methods: We carried out a retrospective case-control study of 80 patients (80 knees) who underwent TKR between 2005 and 2008, and followed up more than 3 years. We divided patients who played golf after TKR as a study group and who did not participate sports activities as a control group. We calculated the sum of width of radiolucent line in 7 sections around femoral component, 7 sections around tibial components and 5 sections in patella component using American Knee Society Roentgenographic Evaluation and Scoring system respectively. The inclusion criteria, was BMI (body mass index) was between 25 and $30kg/m^2$, and UCLA activity-level rating System score was between 5 and 8. We also got the information of patients' patterns of golf activities such as 1. the interval from surgery to return to golf activity. 2. the frequency of golf activities 3. using spike or cart. We obtained the information from patient's questionnaire and telephone interview. We compared with the VAS (visual analogue scale) respectively. And handicaps and driving distance was evaluated as well. Results: The study group's mean sum of radiologic score was 0.84 mm and 0.69 mm in control group. This is not statistically significant (p=0.22). Too early returning to golf (p=0.01) and left knee replacement (p<0.01) were statistically significant factors affecting clinical outcomes of golf activities after total knee arthroplasty. Conclusion: We concluded that golf activities after total knee arthroplasty is not correlated with radiographic loosening, and we need to give an explanation to the patients about increased pain when returing to golf too early and left side arthroplasties.

• Korean Journal of Plant Resources
• /
• v.31 no.1
• /
• pp.77-85
• /
• 2018

The cultivation area of rapeseed (Brassica napus L.) has been increased for oil production and landscaping purpose in Korea. However, as the color of rapeseed flower is very simple, diversified flower color is necessary to improve landscape effect. Interspecific and intergeneric crosses between rapeseed (Brassica napus) and three Cruciferae crops were performed in order to grow diverse flower color of rapeseed. The silique formation rate of interspecific cross rapeseed with cabbage (B. oleracea L) was relatively high (65.8%) and higher than intergeneric cross with rapeseed and radish (Raphanus sativus L.), rapeseed and Orychophragmus, respectively. During silique developing period after artificial pollination, there were many siliques without seeds due to the failure of fertilization. The average number of seed per silique obtained from cross rapeseed and cabbage, rapeseed and radish, rapeseed and O. violaceus were 0.12, 0.4 and 0.12, respectively. The phenotypes of $F_1$ hybrid plants from cross rapeseed and Cruciferae crops were mostly similar to maternal line, but leaf length and leaf width were increased. The interspecific cross of rapeseed and cabbage generated ivory color of flower which is the medium color of parents, and intergeneric cross of rapeseed and O. violaceus created entities with larger flowers which seems to enhance landscape effect. The fatty acid composition of most hybrid seeds intermediated of the two parents for oleic acid, linoleic acid and linolenic acid, content. Whereas hybrid of rapeseed and radish produced less erucic acid than radish parent.

• Korean journal of communication and information
• /
• v.43
• /
• pp.209-246
• /
• 2008

This research is a comparative analysis of article titles in the beginning period of Korean newspapers. The Independent, The Korea Daily News and The Dong-A Ilbo were chosen for this research because each was the representative newspaper of 1890s, 1900s and $1920s{\sim}1930s$ respectively. In result, The Independent's article titles had been appeared on nearly 2 years after its first issue. Before the appearance of titles, The Independent had divided articles only with section names. In 1900s, The Korean Daily News's article titles was longer than those of The independent. And in 1910, the titles of The Korean Daily News had been placed on separated line to divide articles clearly. But during these period, typographical development of titles was not shown and the width of title was remained in one column. This means, the function of title in these periods was not to represent the value of article but only to divide the articles. In 1920s, The Dong-A Ilbo had used big size types and multi-column edit and those changes enabled newspaper to introduce the concept of layout. During the decade of 1930s, The Dong-A Ilbo's titles had occupied more space on newspaper than earlier period. This could be explained from the perspective of sensationalism of commercial newspaper and a tendency of putting more weight on titles. On the dimension of expression, proportions of subjective titles in The Independent, The Korea Daily News were 44.4% and 28.3% each, but the subjective titles of The Dong-A Ilbo in 1920's were only 4.2%. This decrease can be explained by the settlement of objective journalism in Korean newspapers during $1920s{\sim}1930s$.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.3
• /
• pp.221-239
• /
• 2010

Bone loss may occur depending on the loading conditions. careful treatment planning and prosthetic procedures are very important factors for the proper distribution of stress. Evaluate the stress distributions according to numbers and location of implants in three-unit fixed partial dentures. A mandible missing the right second premolar, first molar and second molar was modeled. Using the CT data. we modeled a mandible with a width of 15mm, a height of 20mm and a length of 30mm, 2mm-thickness cortical bone covering cancellous bone mallow. An internal type implant and A solid type abutment was used. A model with 3 implants placed in a straight line, offset 1.5 mm buccally, offset 1.5 mm lingually and another model with 3 implants offset in the opposite way were prepared. And models with 2 implants were both end support models, a mesial cantilever model and a distal cantilever model. Three types of loading was applied; a case where 155 N was applied solely on the second premolar, a case where 206 N was applied solely on the second molar and a case where 155 N was applied on the first premolar and 206 N was applied on the first and second molar. For all the cases, inclined loads of 30 degrees were applied on the buccal cusps and vertical loads were applied on the central fossas of the teeth. Finite element analysis was carried out for each case to find out the stress distribution on bones and implants. This study has shown that prostheses with more implants caused lower stress on bones and implants, no matter what kind of load was applied. Furthermore, it was found out that inclined loads applied on implants had worse effects than vertical loads. Therefore, it is believed that these results should be considered when placing implants in the future.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.17 no.2
• /
• pp.53-58
• /
• 2013

Purpose: To optimize correction method for SPECT/CT, image quality consisting of resolution and contrast was evaluated using three radioisotopes ($^{99m}Tc$, $^{201}Tl$ and $^{131}I$) and three different correction methods; attenuation correction (AC), scatter correction (SC) and both attenuation and scatter correction (ACSC). Materials and Methods: Images were acquired with a SPECT/CT scanner and a conventional CT protocol with an OESM reconstruction algorithm (2 iterations and 10 subsets). For resolution measurement, fixed radioactivity (2.22 kBq) was infused into a spatial resolution phantom and full width at half maximum (FWHM) was measured using a vendor-provided software. For contrast evaluation, radioactive source with a ratio of 1:8 to background was filled in a Flanged Jaszczak phantom and percent contrast (%) were calculated. All the parameters for image quality were compared with non-correction (NC) method. Results: As compared with NC, image resolution of all three isotopes were significantly improved by AC and ACSC, not by SC. In particular, ACSC showed better resolution than AC alone for $^{99m}Tc$ and $^{201}Tl$. Image contrast of all three radioisotopes in a sphere with the largest diameter were enhanced by all correction methods. ACSC showed the highest contrast in all three radioisotopes, which was the most accurate in $^{99m}Tc$ (85.9%). Conclusion: Image quality of SPECT/CT was improved in all the radioisotopes by CT-based attenuation correction methods, except SC alone. SC failed to improve resolution in any radioisotopes, but it was effective in contrast enhancement. ACSC would be the best correction method as it improved resolution in radioisotopes with low energy levels and contrast in radioisotope with low energy levels. However, in radioisotope with high energy level, AC would be better than ACSC for resolution improvement.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.spc1
• /
• pp.161-166
• /
• 2005

Objectives of this study were to select inbred lines which have a good eating quality and desirable segregates during inbreeding of waxy corn. The 64 inbred lines showed a large variance in their kernel shape and weight. 100-kernel weight, pericarp thickness, kernel length, kernel width, and kernel thickness ranged $11.7\~37.3g,\;11\~77{\mu}m,\;5.8\~9.6mm,\;6.5\~10.0mm$, and $4.1\~6.8mm$, respectively. The physicochemical analysis of 64 waxy corn inbred lines showed crude protein, crude fat, free sugar, and amylopectin content ranging $8.7\~15.8\%,\;2.3\~5.8\%,\;1.1\~11.0\%,\;and\;78.5\~93.8\%$, respectively. The texture property analysis of 64 inbred lines by texture analyzer showed a big difference. Gumminess, hardness, and chewiness of 64 inbred lines ranged $91\~383,\;181\~394,\;and\;73\~370$, respectively. The principal component analysis for 14 characteristics related to kernel quality showed that $73.1\%$ of the total variation could be attributed to the first five principal components. Biological meaning of the principal component was explained clearly by the correlation coefficient between principal components and characters. The first principal component appeared to correspond to small kernel and bad eating quality, The second principal component appeared to correspond to large kernel and good eating quality. The 64 inbred lines were classified into 8 groups by the cluster analysis using the first and second principal component. Among the groups, group VII and VIII included inbred lines with good eating quality that had thin pericarp thickness, low protein content, large kernel, and soft tenderness.

• The Korean Journal of Ecology
• /
• v.23 no.1
• /
• pp.25-32
• /
• 2000

To analyze the relationship between climatic factors (monthly temperatures and precipitations) and the radial growths or Pinus densiflora with different topographical settings in Worak National Park, Korea, 20 stands were chosen and 10 trees were selected from each stand. After crossdating, each ring-width series was double detrended (standardized) by fitting first a negative exponential or straight regression line and secondly a 60-year cubic spline. The growth patterns coud be categorized by four groups using cluster analysis. Cluster Ⅰ stand has north aspect, but others have south or southwest aspects. Cluster Ⅰ (one), cluster Ⅱ (ten), and cluster Ⅲ (two) stands are located in lower. elevation (305∼580 m), however, cluster Ⅳ (seven) stands are located in higher elevation, mostly in 560～870 m. Cluster Ⅱ and Ⅲ stands are located at similar elevation with the same aspect, however, cluster Ⅱ stands are located on more rocky and stiff slope with shallow soil depth. The response functions were used to examine the difference in the relationships between climatic factors and tree growths among the 4 cluster chronologies. The climatic factors are not limiting the growth in the cluster Ⅰ stand as highly as in other cluster plots because of rather mesic conditions in the north slope. The precipitation in the spring appears to be the main limiting factor in the cluster Ⅱ stands. The topographical characteristics of the sites of cluster Ⅱ, shallow soil depths on the rocky slope in the south aspect at lower elevation, may enhance the sensitivity of growth to moisture stress. In cluster Ⅲ and cluster Ⅳ, winter and spring temperature prior to the growth become more important than for cluster Ⅱ. This pattern is com-mon for Pinus densiflora trees growing in higher. elevation (equation omitted 800 m) in South Korea. It nay be re-lated with preconditioning effects of temperature as the temperature decreases with increasing elevation (cluster Ⅳ) or in the valley (cluster Ⅲ). The results obtained by tree-ring analysis were digitalized by GIS and spatio-temporal information on tree-ring data and topographic setting were analyzed and displayed simultaneously. The results of this study can be used to predict the future change of Pinus densiflora ecosystem to climate change expected in central Korea.

• Journal of Biosystems Engineering
• /
• v.4 no.1
• /
• pp.1-23
• /
• 1979

The use of barley seeder attached to rotary tiller in the rural area has a significant meaning not only for the solution of labor peak season, but also for the increase of land utilization efficiency. The facts that presently being used barley seeders are all based on the mechanical principles of the reverse rotation, center drive and are all using forward rotating tine, which is used to be easily and heavily worn out when it rotates reversely, raise problem of recommending them to rural area in Korea. Therefore, the main objective of the study was to develop new type of rotary tine attachable to barley seeders. To attain the objective the following approaches were applied. (1) The kinematic analysis of reverse rotating barley seeders. (2) The studies on the soil bin and artificial soil. (3) The comparative experiment on the power requirement of prototype tine. The results obtained from the studies are summarized as follow: 1. The kinematic analysis of barley seeder attached to rotary tiller: The following results were obtained from the kinematic analysis for deriving general formulae of the motion and velocity characterizing the rotary tine of barley seeders presently being used by farmers. a) The position vector (P) of edge point (P) in the rotary tine of reverse rotating, center drive was obtained by the following formula. $$P=(vt+Rcos wt)i+Rsin wt j+ \{ Rcos \theta r sin \alpha cos (wt- \beta +\theta r) +Rsin \theta r sin \alpha sin (wt-\beta + \theta r) \} lk $$ b) The velocity of edge point $(P^')$ of reverse rotating, center drive rotary tine was obtained by the following formula. $$(P^')=(V-wR sin wt)i+(w\cdot Rcoswt)j + \{ -w\cdot Rcos \theta r\cdot sin \alpha \cdot sin (wt-\beta +\theta r) + w\cdot Rsin \theta r\cdot sin \alpha \cdot cos (wt- \beta + \theta r \} k $$ c) In order to reduce the power requirement of rotary tine, the angle between holder and edge point was desired to be reduced. d) In order to reduce the power requirement, the edge point of rotary tine should be moved from the angle at the begining of cutting to center line of machine, and the additional cutting width should be also reduced. 2. The studies on the soil bin and artificial soil: In order to measure the power requirement of various cutting tines under the same physical condition of soil, the indoor experiments Viere conducted by filling soil bin with artificially made soil similar to the common paddy soil and the results were as follows: a) When the rolling frequencies$(x)$ of the artificial soil were increased, the densIty$(Y)$ was also increased as follows: $$y=1.073200 +0.070780x - 0.002263x^2 (g/cm^3)$$ b) The absolute hardness $(Y)$ of soil had following relationship with the rolling frequencies$(x)$ and were increased as the rolling frequencies were increased. $$Y=37.74 - \frac {0.64 + 0.17x-0. 0054x^2} {(3.36-0.17x + 0.0054x^2)^3} (kg/cm^3)$$ c) The density of soil had significant effect on the cohesion and angle of internal friction of soil. For instance, the soil with density of 1.6 to 1.75 had equivalent density of sandy loam soil with 29.5% of natural soil moisture content. d) The coefficient of kinetiic friction of iron plate on artificial soil was 0.31 to 0.41 and was comparable with that of the natural soil. e) When the pulling speed of soil bin was the 2nd forward speed of power tiller, the rpm of driving shaft of rotary was similar to that of power tiller, soil bin apparatus is indicating the good indoor tester. 3. The comparative experiment on the power requirement of prototype tine of reverse rotating rotary: According to the preliminary test of rotary tine developed with various degrees of angle between holder and edge pcint due to the kinematic analysis, comparative test between prototype rotary tine with $30 ^\circ $ and $10 ^\circ$ of it and presently being used rotary tine was carried out 2nd the results were as follows: a) The total cutting torque was low when the angle between holder and edge point was reduced. b) $\theta r$ (angle between holder and edge point) of rotary tine seemed to be one: of the factors maximizing the increase of torque. c) As the angle between holder and edge point ($\theta r$) of rotary tine was $30 ^\circ $ rather than $45 ^\circ $, the angle of rotation during cutting soil was reduced and the total cutting torque was accordingly reduced about 10%, and the reduction efficiency of total cutting torque was low when the angle between holder and edge point ($\theta r$) of rotary tine was $10 ^\circ $, which indicates that the proper angle between holder and edge point of rotary tine should be larger than $10 ^\circ $ and smaller than $30 ^\circ $ . From above results, it could be concluded that the use of the prototype rotary tine which reduced the angle between holder and edge point to $30 ^\circ $, insted of $45 ^\circ $, is disirable not only decreasing the power requirements, but also increasing the durabie hour of it. Also forward researches are needed, WIlich determine the optimum tilted angle of rotary brocket, and rearrangement of the rotary tine on the rotary boss.

• Journal of Korean Society of Archives and Records Management
• /
• v.3 no.1
• /
• pp.1-21
• /
• 2003

In this paper the characteristics of the script centers golden and/or silver letter center in Koryo Dynasty and a set of seven rolls of the script written in silver letter on blue paper prayed by Yearn Seong-Ik were studied with focusing on the referred records and an epilog of the script. This script was discovered from Namgewon's stone stupa, when it was transported from original site of Daekam Dong, Kaiseong city to Kyungbok Palace in 1919. This script prayed by Yeom Seong-Ik which was written in silver paste on blue papers is a set of seven rolls, the size is 31.1 cm (length) ${\times}$ 27.2 cm (width). The cover painting and Beonsangwha(Buddha's preaching picture) were painted out and in the roll cover. This script was written with 14 letters on a line whose characteristic with the style of cover painting and Beonsangwha is similar to the golden and silver scripts prayed by kings of Koryo Dynasty. The person who prayed this script was a powerful vassal of the king Chungyeol period, Yeom Seong-Ik. According to Koryosa(Koryo History) and Koryosa jeolyo(summarized Koryo History), it is described that Yeom Seong-Ik offered his own house which was built by a group of strangers as a 'Writing Place for the complete collection of Buddhist Sutras and the place of the script of the complete collection of Buddhist Sutras. Therefore, it is possible to consider that this script a set of seven rolls of the script of Saddharma Pundarika-Sutra was written to pray for himself as well as his families' fortune at the place of golden script of the complete collection of Buddhist Sutras, and enshrined it in the Namgaewon stone stupa when the stupa was repaired in 9th year of king ChungYeol. Above all the most important point should be centered on that he offered his house as a writing place for golden script of the complete collection of Buddhist Sutras as recorded in Koryosa Jeolyo. The writing place for golden script of the complete collection of Buddhist Sutras should be emphasized on the meaning of its site. It is an important key point to clear that Kumjawon(Golden letter center) would be different from Kumjadejangso(the writing place of golden script for complete collection of Budihist Sutras) with Kumkyungsa(Goldm script place). As considereing the point that this script showed the characteristics of golden and/or silver scripts which prayed by king Chungyeol in Koryo Dynasty as they were, even though this script was manufactured by individual praying, this script follwed in the style of Kumjawon(golden letter center) and/or Unjawon(siIver letter center) as they were, because this script was written in the place of the golden script for the complete collection of Buddhist Sutras. In this paper all of the points described above with focusing on the referred records and an epilog of this script were collectively considered to make clear the characteristics of the script centers, golden and/or silver letter.