• 전기학회논문지
• /
• 제67권6호
• /
• pp.702-707
• /
• 2018

In case of Lighting occurs in Domestic combined distribution line, normally the voltage for the neutral line increase dramatically. General connection for underground cable is bundled common earth type so the lightning over voltage increase at the concentric-neutral line is not big enough to give impact on cable sheath. But in case of Non bundled common earth type it is necessary to analyze the phenomena on cable sheath caused by lightening overvoltage. Especially pole and cable joint are the core factor to consider. In this paper concrete pole and cable joint were evaluated in case of Non bundled common earth type combined distribution Line. EMTP simulation model has been designed and several case study were made. Also several experimental test were made to verify the simulation result.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.577-580
• /
• 2003

Stress state of chip formation zone is one of the main problems in metal cutting mechanics. In two-dimensional case this process is usually considered as consistent shears of work material along single of several shear surfaces. separating chip from workpiece. These shear planes are assumed to be trajectories of maximum shear stress forming corresponding slip-line field. This paper suggests new approach to the constriction of slip-line field, which Implies uniform compression in chip formation zone. On the base of given model it has been found that imaginary shear line in orthogonal cutting is close to the trajectory of maximum normal stress and the problem about its determination have been considered. It has been shown that there is a second central slip-line field inside chip, which corresponds well to experimental data about stress distribution on tool rake face and tool-chip contact length. The suggested model could be useful in solution of various problems of machining.

• 한국정밀공학회지
• /
• 제20권12호
• /
• pp.80-88
• /
• 2003

We propose a new technique to design an unmaned integrating control system based-on Windows XP version off-Line Programming System which can simulate a dynamic model of robot manipulator in three dimensions graphics space in this paper. The robot with 4 and 6 axes modeled SM5 and AM1 respectively were adopted as an objective model. Forward kinematics, inverse kinematics and robot dynamics modeling were included in the developed off-line program. The interface between users and the off$.$line programming system in the Windows XP's graphic user interface environment was also studied. The developing language is Microsoft Visual C++. Graphic libraries, OpenGL, by silicon Graphics, Inc. were utilized for three dimensions graphics.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2000년도 추계학술대회 논문집
• /
• pp.613-619
• /
• 2000

This paper presents a mettled to reduce the number of conductors of catenary system for estimating line constants. Conductors of a catenary system are grouped and reduced. For example, the model representing the contact and the messenger conductors with a single equivalent conductor is. probably more realistic than assuming the two conductors completely separated, since they are generally connected by droppers every few meters. Therefore, this paper shows the method to reduce the number of conductors using electric circuit theory. To verify the results, we compared the equivalent line constants obtained by proposed method with those obtained by measurement.

• 한국IT서비스학회지
• /
• 제5권2호
• /
• pp.155-168
• /
• 2006

Software product line is a software product or a set of software system, which has common functions. We can develop a specific software product, which satisfies requirements of a particular market segment and a mission in a specific domain by reusing the core asset such as the developed software architecture through the software product line. Software development methodology based on the software product line can develop a software more easily and fast by reusing the developed software core asset. Developed countries of software technology select software product line as a core field of software production technology, and support technology development. In case of USA, CMU/SEI(Carnegie Mellon University/Software Engineering Institute) developed product-line framework 4.0 together with the industry and the Department of Defense. Europe is supporting the development of product line technology through ITEA(IT for European Advancement) program. However, industries in our country understand the necessity of software production technology based on product line concept for the purpose of increasing productivity, it is not sufficient to invest for this technology development. In this paper, we aim to construct the common architecture of software product line for production of the software product line.

• 대한전기학회논문지:전력기술부문A
• /
• 제55권8호
• /
• pp.313-321
• /
• 2006

This paper describes the overvoltage obtained by surge behavior analysis in testing underground distribution systems. Model systems consist of overhead distribution line and underground cable. Such model system considered various characteristics of actual distribution systems will be soon constructed at testing yard. Simulation is carried out under various states such as cable kinds, cable length, lightning wave and time, and branch circuits. Model is established by EMTP/ATPDraw. Line Constants are calculated by ATP_LCC. When the direct lightning surge strikes on conductor of overhead line, the overvoltage is calculated using EMTP/ATPDraw in many cases. Simulation results will be compared with real testing results at testing yard in the near future. The compared results will be used to establish protection methods in actual underground distribution systems.

• 대한기계학회논문집
• /
• 제10권2호
• /
• pp.241-246
• /
• 1986

본 연구에서는 산업 현장에 쉽게 적용할 수 있도록 측정과 설치가 용이한 용접 모재간에 가해지는 전압(weld voltage)파형에서 용접 변수를 구하고, 실험으로 구한 용접 강도와의 상관 관계로부터, 점용접 품질 감시체제를 개발하고자 한다. 전압 파형에서 용접 변수를 구하기 위하여 추계 모델링 기법을 적용하고, 구해진 모 델로부터 분산 해석(dispersion analysis)을 통하여 용접 변수를 찾으며, 동시에 전극 변위 곡선을 실험적으로 구하여서, 분산 해석 방법의 신뢰도를 검사 하고자 한다.

• 한국전자파학회지:전자파기술
• /
• 제6권3호
• /
• pp.80-90
• /
• 1995

마이크로스트립 단일선로, 직각벤드 및 결합선로의 산란행렬을 multipart r$\xi$twork model을 이용하여 1-18GHz 범위에서 계산했다. 단일선로는 평면형 도파관 모텔을 이용하여 해석했다. 직각벤드의 경우는 두개 의 사각형 부분으로 나누어져 각 부분은 단일선로와 같은 방법으로 해석되며, 각 부분의 임피던스 행렬은segmentation 방볍을 이용하여 연결된다. 결합선로 사이의 전자계 결합의 해석에는 Green 함수를 이용하는 기 존의 방법보다 계산시간이 적게 소요되는 새로운 방법이 이용되었다 상기의 세가지 구조에 대한 수치해석 결 과는 SuperCompact의 결과와 잘 일치하며, 이는 상기의 방법이 복잡한 단일 및 결합선로 불연속구조의 해석에 유용하게 사용될 수 있음을 보여준다

• 제어로봇시스템학회논문지
• /
• 제6권1호
• /
• pp.104-111
• /
• 2000

A fuzzy logic Run-by-Run(RbR) controller and an in -line wafer characteristics prediction scheme for the rapid thermal processing system have been developed for the study of process repeatability. The fuzzy logic RbR controller provides a framework for controlling a process which is subject to disturbances such as shifts and drifts as a normal part of its operation. The fuzzy logic RbR controller combines the advantages of both fuzzy logic and feedback control. It has two components : fuzzy logic diagnostic system and model modification system. At first, a neural network model is constructed with the I/O data collected during the designed experiments. The wafer state after each run is assessed by the fuzzy logic diagnostic system with featuring step. The model modification system updates the existing neural network process model in case of process shift or drift, and then select a new recipe based on the updated model using genetic algorithm. After this procedure, wafer characteristics are predicted from the in-line wafer characteristics prediction model with principal component analysis. The fuzzy logic RbR controller has been applied to the control of Titanium SALICIDE process. After completing all of the above, it follows that: 1) the fuzzy logic RbR controller can compensate the process draft, and 2) the in-line wafer characteristics prediction scheme can reduce the measurement cost and time.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.318-323
• /
• 1992

The improvement of the production capability of multi PCB assembly line can not be simply done by improving the capacities of each assembly robot cells but must be done by controlling the production line effectively with the line host computer which controls over the whole assembly line. A real time production control, a real time model change and a real time trouble shooting compose the specific concepts of this technique. In this paper, we present and analyze the definition and application method of real time assembly concept. The meaning of real time model change, troubles and error sooting and its algorithm will be introduced. Also, the function of the host computer which is in charge of all of many different tasks mentioned above and the method are presented. The improvement of the productivity is mainly focused on the efficiency of multi-PCB production control. The importance of this aspect is gradually increasing, which we have presented the analysis and the solution.