• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2007년도 춘계학술발표회 논문집
• /
• pp.153-156
• /
• 2007

There have been many studies on extracting building boundaries from LiDAR(Light Detection And Ranging) data. In such studies, points are first segmented, then are further processed to get straight boundary lines that better approximate the real boundaries. In most research in this area, processes like generalization or regularization assume that buildings have only right angles, i.e. all the line segments of the building boundaries are either parallel or perpendicular. However, this assumption is not valid for many buildings. We present a new approach consisting of three steps that is applicable to more complex building boundaries. The three steps consist of boundary tracing, generalization, and regularization. Each step contains algorithms that range from slight modifications of conventional algorithms to entirely new concepts. Four typical building shapes were selected to test the performance of out new approach and the results were compared with digital maps. The results show that the proposed approach has good potential for extracting building boundaries of various shapes.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제10권5호
• /
• pp.408-417
• /
• 2005

Increasing numbers of value added chemicals are being produced using microbial fermentation strategies. Computational modeling and simulation of microbial metabolism is rapidly becoming an enabling technology that is driving a new paradigm to accelerate the bioprocess development cycle. In particular, constraint-based modeling and the development of genome-scale models of industrial microbes are finding increasing utility across many phases of the bioprocess development workflow. Herein, we review and discuss the requirements and trends in the industrial application of this technology as we build toward integrated computational/experimental platforms for bioprocess engineering. Specifically we cover the following topics: (1) genome-scale models as genetically and biochemically consistent representations of metabolic networks; (2) the ability of these models to predict, assess, and interpret metabolic physiology and flux states of metabolism; (3) the model-guided integrative analysis of high throughput 'omics' data; (4) the reconciliation and analysis of on- and off-line fermentation data as well as flux tracing data; (5) model-aided strain design strategies and the integration of calculated biotransformation routes; and (6) control and optimization of the fermentation processes. Collectively, constraint-based modeling strategies are impacting the iterative characterization of metabolic flux states throughout the bioprocess development cycle, while also driving metabolic engineering strategies and fermentation optimization.

• 한국전자통신학회논문지
• /
• 제11권4호
• /
• pp.427-432
• /
• 2016

수치에 있어서 기억법은 숫자를 기억하는데 유용하다. 이러한 숫자와 관련된 기억법에서 점, 선, 막대 등과 같은 많은 방법들을 적용한 그래프나 이미지는 상당히 훌륭한 연상 기호의 역할을 한다. 수치와 관련된 기억법은 뇌가 원래의 형태보다 더 보유 할 수 있는 방법으로 정보를 변환하는 것과 관련된다. 이 연구의 이전 연구를 되짚어보면 수치 기억법과 관련하여 단순 그래프 알고리즘과 배열된 이미지 알고리즘을 제시했었다. 본 연구에서는 모바일 환경에서 이전 연구의 알고리즘을 적용하기 위해 기억법 기반 수치 정보 시스템을 구현하고 평가한다.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.43-46
• /
• 2003

This paper presents capacity characteristics of the indoor LOS(Line-Of-Sight) propagation channel for MIMO system at 5GHz. The distance between antenna elements, their moving path, and number of transmitting and receiving antennas can be determined by wanted eigen-vlaue, and channel capacity of the MIMO communication channel using only reliable simulation without measurements. The simulation uses 3D Ray tracing and patch scattering model to which electromagnetic material constants are applied. As distance between antenna elements increases, distribution of the eigen-value show a tendency to decrease, but channel capacity increases in LOS environment. However, despite of short distance between antenna elements, large value of channel capacity is obtained in positions which have high AS. When the position of receiver antennas are shifted, channel capacity hardly changed, and as number of antenna elements increases, channel capacity also increases regularly.

• 복식
• /
• 제15권
• /
• pp.21-45
• /
• 1990

The purpose of this thesis is to study the method of the reasonable pattern design. The studying method is based on the original principle of the trousers' cutting and I have a hypothesis about the trousers pattern which should be proved. When I selected the practical method, I made use of the international measuring rule, graph paper and tracing paper, in order to prove the new pattern design. The reasonable pattern design should be the one of the suitable original principles to be suited in the design through any measurement. Therefore, I have discussed the above mentioned design. I find out the conclusion to prove the hypothesis of pattern design with the experimental measure after showing the above mentiond design. The characteristics is as follows. First : To be convinient when walking, because of little degree as folding of the front part of trousers with the under-angle. Second : To be suitable in proportion to the length of trousers and the under-angle. Third ; When folding the center line of the Sapok (a name of one of the trousers parts), the length of the Sapoks is same and harmonized with the Sapoks because of the same angle of both Sapoks in any case of the measurement. Fourth : No correction of the lines when dressing, for the same points of the large Sapok and the small one. Fifth : To be easiness of the pattern design through the concrete measurement. I could find out a little extent errors of pattern showings, an easiness of dressing, scientification of formation in Korean trousers and standard of the practical measurement in the program to be presented as the result of studying.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권5호
• /
• pp.636-644
• /
• 2006

Recently, there were some successful examples that the laser welding was introduced into production line. However, the spread of laser welding is not sufficient in many industries. There are several reasons why it is difficult to penetrate the laser welding into production lines. Because it is different from reflection, absorption and permeation of laser beam according to material and surface condition. Moreover, there are significant problems in processing such as absorption and scattering of beam by the induced plasma or plume. Therefore, understanding of mechanism on formation of weld defect in laser welding of the laminated core for motor is very important. In this paper, it was analyzed in terms of materials which was source of defect in laser welding and conventional arc welding. As a results of analysis, insulation coating film of the laminated core was judged to main factor of weld defect. it could be well aware as tracing carbon volume, and it was deduced that weld defect by insulation coating film was caused by difference of mechanism between the two heat sources.

• 한국농공학회지
• /
• 제45권3호
• /
• pp.103-115
• /
• 2003

This study examines groundwater movement system analysis and movement forecast algorithm using finite element method. The target is Cheongha-myeon area, Bukgu, Pohang-city which has many difficulties in water supply during drought period. From the comparison of the differences between obtained values by WINFlOW model and observed values, it is thought that groundwater head distribution under steady flow is reflected well at the level of reliability Groundwater movement of study area shows stable pattern from western watershed to eastern coastal area while flow path is dense and steep in the center of the coastal area. The results of particle tracing for each well show a comparatively straight line from the western boundary side to the observation position at the upper area of the well, and are analyzed as it diffuses according to getting closer to the coast at the lower area of the well. The result of effect circle examination attendant on pumping amount in study area shows variation tendency that groundwater head decreases at the side and the lower area more than at the upper area of the well when groundwater flows from west to east(coast). As mentioned above, satisfactory results of groundwater movement analysis using WINFlOW model, two dimensional groundwater movement analysis model, are obtained through the great decrease of physical uncertainty of groundwater movement system.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2012년도 하계학술대회
• /
• pp.275-278
• /
• 2012

본 논문에서 2D-3D 자동 영상 변환을 위하여 2D 상으로부터 깊이 지도(depth map)을 생성하는 방법을 제안한다. 제안하는 방법은 보다 정확한 깊이 지도 생성을 위해 영상의 전경 깊이 지도(foreground depth map)와 배경 깊이 지도(background depth map)를 각각 생성 한 후 결합함으로써 보다 정확한 깊이 지도를 생성한다. 먼저, 전경 깊이 지도를 생성하기 위해서 라플라시안 피라미드(laplacian pyramid)를 이용하여 포커스/디포커스 깊이 지도(focus/defocus depth map)를 생성한다. 그리고 블록정합(block matching)을 통해 획득한 움직임 시차(motion parallax)를 이용하여 움직임 시차 깊이 지도를 생성한다. 포커스/디포커스 깊이 지도는 평탄영역(homogeneous region)에서 깊이 정보를 추출하지 못하고, 움직임 시차 깊이 지도는 움직임 시차가 발생하지 않는 영상에서 깊이 정보를 추출하지 못한다. 이들 깊이 지도를 결합함으로써 각 깊이 지도가 가지는 문제점을 해결하였다. 선형 원근감(linear perspective)와 선 추적(line tracing) 방법을 적용하여 배경깊이 지도를 생성한다. 이렇게 생성된 전경 깊이 지도와 배경 깊이 지도를 결합하여 보다 정확한 깊이 지도를 생성한다. 실험 결과, 제안하는 방법은 기존의 방법들에 비해 더 정확한 깊이 지도를 생성하는 것을 확인할 수 있었다.

• 한국산학기술학회논문지
• /
• 제5권2호
• /
• pp.191-196
• /
• 2004

경영자가 가격이나 원가와 관련된 정확한 정보를 얻을 수 있다면 DEA모형을 이용하여 기술적 효율성 뿐 만 아니라 배분적 효율성과 관련된 분석이 가능해진다. 배분적 효율성을 분석하므로서 총체적 효율성을 기술적 효율성과 배분적 효율성으로 분해할 수 있고 이를 통해 보다 다양한 분석수단을 얻을 수 있다. 본 연구에서는 기본적 DEA 모형을 변형하여 배분효율성을 분석할 수 있는 DEA모형을 설계한다. 우선 예산선에 바탕을 둔 비용최소화 모형을 설계하고 이것을 다시 이익 극대화 모형으로 변환한 후 가산형의 DEA 모형으로 재설계한다. 가격정보가 주어진 경우 기술적 효율성의 범주를 벗어난 보다 다양한 형태의 효율성 분석이 가능해져 성과평가 및 그 결과의 해석 그리고 보다 현실성 있는 경영개선방안의 도출이 가능해진다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1996년도 특별강연 및 추계학술발표 개요집
• /
• pp.139-141
• /
• 1996

Among various welding parameters, the welding current which is inversely proportional to the tip-to-workpiece distance in GMAW is an essential parameter to monitor the GMAW process of horizontal fillet joints. For the case of weld defect such as overlap in horizontal fillet welding, therefore, the signal processing for process monitoring or automatic seam tracking should be modified by considering the weld pool surface geometry including the corresponding weld defect. In other words, the adequate signal processing algorithm is indispensible to improve the performance of the arc sensor. However, arc sensor algorithm already developed usually focus on weld seam tracing but do not considering the weld qualities. In this paper, various experiments were carried out to investigate the tendencies of the weld defects when weaving motion is added, and the experimental method based on 2$^n$ factorial design was proposed for deriving the mathematical model between the leg length and the various welding conditions. Moreover, a signal processing method based on the artificial neural network(Adaptive Resonance Theory) was proposed far discriminating the current signal of sound weld beads from that of weld beads with overlap. Finally, the algorithm for weld seam tracking combined with the mathematical modeling and the signal processing method was carried out to track the weld line in conjunction with the improvement of the weld qualities. The reliability of the proposed algorithms were evaluated through various experiments, which showed that the proposed algorithms could be effectively used for arc welding automation.