• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.04b
• /
• pp.370-374
• /
• 1993

This paper describes a study on the expert system based process planning of the block division process in shipbuilding. The prototype system developed deterines the block division line of the midship of crude-oil tanker. Case-based reasoning (CBR) approach relying on previous similar cases to solve the problem is applied instead of rule-based reasoning (RBR). Similar cases are retrieved from case base according to the similarity metrics between input problem and cases. The retrieved case with the highest priority is then adapted to fit to the input problem buy adaptation rules. The adapted solution is proposed as the division line for the input problem.

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.1
• /
• pp.54-61
• /
• 1999

Objective of the research is to put the vast and complex fault tracking knowledge of human experts in semiconductor production line into the knowledge base of computer system. We mined the fault tracking knowledge of domain experts(engineers of production line) for the construction of knowledge base of the expert system. Object oriented fact models which increase the extensibility and reusability have been built. The rules are designed to perform the fault diagnosis of the items in production device. We have exploited the evidence accumulation method to assign check priority in rules. The major contribution is in the overall design and implementation of the nile base and related facts of the expert system in object oriented paradigm for the application of the system in fault diagnosis in semiconductor production line.

• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.1492-1494
• /
• 1987

This paper describes a hardware architecture called Edge Painting Machine for real time generation of scan line images for raster scan graphics display. The Edge Painting Machine consists of Scanline Processor which converts polygon data sorted in their depth priority into a set of scan line commands for each scan line, and Edge Painting Tree which converts the scanline commands set into a raster line image. Edge painting tree has been designed using combinational logic circuit. The designed circuit has been simulated to verify the proper functioning. A salient feature of the EPT is that hardware composition is simple, because each processor is constituted by only combinational logic circuit.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.12
• /
• pp.3755-3759
• /
• 2010

A on-line SPE (solid phase extraction)-HPLC preconcentration method was developed for the determination of phenolic compounds at trace levels in environmental water sample. XAD-4 and Dowex 1-X8 were used as sorbent in the on-line SPE-HPLC method for the selective enrichment of nine phenolic compounds, which are included in the priority pollutants list of the US EPA. Also alumina prefiltering considerably reduced the amount of interfering peaks due to humic substances that could accumulated due to the preconcentration step and prevent quantification of polar phenolic compounds in environmental water samples. This method was used to determine the phenolic compounds in tap and river water and superiority to the US EPA 625 method in its enrichment factor, pretreatment time, recoveries, and detection limit. The limits of detection were in the range of $0.3-0.9\;{\mu}g/L$ in tap water sample.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1587-1592
• /
• 2003

There are three kinds of singularity in controlling redundant manipulators. Kinematic, algorithmic and representation singularities are those. If manipulators fall into any singularity without proper action to avoid it, the control system must go away from our desire, and we can meet a dangerous situation. Hence, we have to deal the singularities very carefully. In this paper, we describe an on-line solution for avoiding the occurrence of both algorithmic and kinematic singularities in task-priority based kinematic controllers of robotic manipulators. Representation singularity can be easily avoided by using proper representation algorithm, so, in this paper, we only consider kinematic and algorithmic singularities. The proposed approach uses a desired task reconstruction and a successive task projection in order to maintain the measure for singularity over a user defined minimum value. It shows a gain in performance and a better task error especially when working in proximity of singular configurations. It is particularly suitable for autonomous systems where an off-line trajectory control scheme is often not applicable. The advantage and performance of the proposed controller is verified by simulation works. And, the experiment with real manipulator is remaining for the future works.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.37 no.4
• /
• pp.9-15
• /
• 2000

The purpose of this paper is to minimize the a slack computation time of the scheduling of a soft aperiodic real-time tasks in a fixed priority real-time system. The proposed algorithm reduces the computation overhead at on-line time and supports the maximum slack time assigned for aperiodic real-time tasks. The proposed algorithm has 10~20% more response time for aperiodic real-time tasks than that of Slack Stealing Algorithm that offers optimal response time in fixed priority real-time system. However, the performance of the proposed algorithm is seven times better in a scheduling overhead.

• Journal of the Korean Institute of Gas
• /
• v.13 no.1
• /
• pp.45-51
• /
• 2009

A safety assessment was performed through the process analysis of hydrogen station. The purpose of this study provides basic information for the standard establishment about hydrogen stations. The processes of hydrogen stations were classified by four steps (process of manufacture, compression, storage, charge). FMEA (Failure Mode and Effect Analysis) method was applied to evaluate safety. Each risk element is following; S (severity), O (occurrence), D (detection). And the priority of order was decided by using RPN (Risk Priority Number) value multiplying three factors. Scenarios were generated based on FMEA results. And consequence analysis was practiced using PHAST program. In the result of C.A, jet fire and explosion were shown as accident types. In case of leakage of feed line in PSA process, concentration of CO gas is considered to prevent CO gas poisoning when the raw material that can product CO gas was used.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.11A
• /
• pp.859-866
• /
• 2003

In this paper, we designed the bandwidth allocation scheme with priority consideration for upstream channel access of EthernetPON. The objective of our scheme is to control the multi services in more effective way according to their CoS(Class of Service) or QoS(Quality of Service). The designed scheme considers transmission priority in the both side of OLT and ONU. In the OLT's view, the Two-step scheduling algorithm is applied with which we can support multiple bandwidth allocation policies simultaneously, i.e. SBA for the time-sensitive, constant rate transmission services and DBA for the best-effort services. This Two-step scheduling algorithm reduces the scheduling complexity by separating the process of transmission start time decision from the process of grant generation. In the ONU's view, the proposed scheme controls 8 priority queues of the 802.1d recommended 8 service classes. Higher priority queue is serviced in prior during the allowed GATE time from OLT. The OPNET modeling and simulation result compares the performance of each bandwidth allocation policy with SBA or DBA only approach.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.4
• /
• pp.1248-1257
• /
• 2014

Overhead transmission lines are crucial components in power transmission systems. Well-designed maintenance strategy for overhead lines is required for power utilities to minimize operating costs, while improving the reliability of the power system. This paper presents a maintenance priority index (MPI) of overhead lines for a reliability centered approach. Proposed maintenance strategy is composed of a state index and importance indices, taking into account a transmission condition and importance in system reliability, respectively. The state index is used to determine the condition of overhead lines. On the other hand, the proposed importance indices indicate their criticality analysis in transmission system, by using a load effect index (LEI) and failure effect index (FEI). The proposed maintenance method using the MPI has been tested on an IEEE 9-bus system, and a numerical result demonstrates that our strategy is more cost effective than traditional maintenance strategies.

• Journal of Korean Society for Quality Management
• /
• v.32 no.4
• /
• pp.184-195
• /
• 2004

Current companies 집중 on how to operate and select projects to achieve the best result. 6sigma projects are chosen in the best suitable concept, which are solved by the 6Sigma experts according to the priority. And every project has to be launched not the view of individual management factors but the total factors, Big Y. Therefore, a process needs to be treated to connect the vital few factors in various processes to improve the yield, which is the main performance criteria in a manufacturing industry This report is to make the total optimization through the Vital-Few mapping between quality characteristics and process factors in a manufacturing line. Accordingly, it means to secure lower variance by making the CTP(Critical To Process) optimization and finally to improve the yield.