• 제목/요약/키워드: Line graph

검색결과 207건 처리시간 0.021초

Electron Spin Resonance Investigation of Fe3+ in Crystalline LiNbO3 Under the Polarized External Radiation

  • Park, Jung-Il;Cheong, Hai-Du
    • 한국자기공명학회논문지
    • /
    • 제17권2호
    • /
    • pp.92-97
    • /
    • 2013
  • We study the electron spin resonance line-width (ESRLW) of $Fe^{3+}$ in crystalline $LiNbO_3$ ; the ESRLW is obtained using the projection operator method (POM) developed by Argyres and Sigel. The ESRLW is calculated to be axially symmetric about the c-axis and is analyzed by the spin Hamiltonian with an isotopic g factor at a frequency of 9.5 GHz. The ESRLW increases exponentially as the temperature increases, and the ESRLW is almost constant in the high-temperature region (T>8000 K). This kind of temperature dependence of the ESRLW indicates a motional narrowing of the spectrum when $Fe^{3+}$ ions substitute the $Nb^{5+}$ ions in an off-center position. It is clear from this feature that there are two different regions in the graph of the temperature dependence of the ESRLW.

구조해석에 의한 필기체 한글의 온라인 인식 (On-Line Recongnition of Handwritten Hangeul by Structure Analysis)

  • 홍성민;김은원;박종국;조원경
    • 대한전자공학회논문지
    • /
    • 제23권1호
    • /
    • pp.114-119
    • /
    • 1986
  • In this paper, an algorithm for the on-line recognition of handwritten Hangeul is proposed. The strokes are recognized by the minimum distance parser. The phonemes are separated by the finite-state automata resulted from the state graph of phonemes which are produced by the order of strokes. By simulation result for 3,000 characteristics in practical sentences, the recognition rate of strokes is obtained to be 98.5% and the separation rate of phonemes is obtained to be 92.5%.

  • PDF

온실의 난방부하 결정을 위한 Degree-Hour 모델식 비교 분석 (Analysis and Comparison of Standard and Existed Heating Degree-Hours Model for decision of Greenhouse Heating Load in Korea)

  • 우영희
    • 현장농수산연구지
    • /
    • 제6권1호
    • /
    • pp.143-154
    • /
    • 2004
  • 본 실험은 기존의 난방 부하 모델식을 검토하고 문제점을 수정 보완하여 국내에 적용 가능한 모델식을 선정하고 지역별 온실내 목표온도에 따른 Degree hour 값을 결정하기 위하여 수행하였다. 국내 기상환경에 적용 가능한 모델식을 선정하기 위하여 1961년부터 2000년의 기상자료를 이용하여 온실내 목표온도를 9, 13, 16, 20℃로 설정하여 현재까지 개발된 모델식과 기본식의 지역별 DH값을 산출하였다. 지역별로 산출된 기본의 DH값을 종속변수, Mihara(6식)식, Hayashi(7식)식과 각각의 수정식인 6-1식, 7-1식을 독립변수로 하여 온실내 설정온도에 따른 수정결정상관계수를 분석한 결과 수정 Mihara(6-1)식이 기본식에 가장 근접하였다. 따라서 본 실험 조건하에서 국내적용 가능한 DH모델식은 수정 Mihara식임이 판명되었다. 수정 Mihara식을 이용하여 온실내 목표온도 9, 13, 16, 20℃ 따른 DH값 등고선 그래프를 지역별로 제시하였다.

축소 모의된 22.9 kV-Y 배전선로의 유도 전압에 대한 신뢰성 검증 (Verification of Reliability by the Induced Voltage of a Downscaled and Simulated 22.9kV-Y Distribution Line)

  • 김점식;최충석
    • 한국안전학회지
    • /
    • 제30권4호
    • /
    • pp.26-31
    • /
    • 2015
  • The purpose of this paper is to measure the induced voltage of the downscaled and simulated overhead ground wire of a 22.9kV-Y distribution line. This study performed a test of the downscaled and simulated distribution line according to whether it is grounded or not and the value of the ground resistance. In order to verify the reliability of the data measured by the test, the data was analyzed using the Minitab 17 program. It was found that the induced voltage of the downscaled and simulated distribution line is influenced by the value of the ground resistance. It was also found that the ground resistance obtained at a certain point is closely related to whether electric poles are grounded or not. The analysis results of the measured test data with a statistical method showed that the Anderson Darling (AD) was analyzed to be the smallest as 0.188 when the ground resistance of the electric poles had been maintained at $10{\Omega}$. In addition, the P value analyzed to be 0.894 which is in the proximity of the theoretical value of 1 and verified the reliability of the test data. It could be seen that the data measured by the downscaled simulation test forms a linear graph. It is thought that if a distribution line is installed in the same manner as the downscaled, simulated distribution line, the mean induced voltage will be reduced and reliability will be increased.

A Study on Radiation Risk Recognition Aided System Visualizing Risk Information by CG

  • Katagiri, M.;Tuzuki, Y.;Sawamura, S.;Aoki, Y.
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2002년도 ITC-CSCC -1
    • /
    • pp.425-428
    • /
    • 2002
  • The technology of Computer Graphics (CG) has been in great progress for almost 20 years and has proven to be a valuable tool for a broad variety of fields, including nuclear engineering. To work in any hazardous environment for example radiation field is particularly challenging because the danger is not always visually apparent. In this study as the application of CG to nuclear engineering field, we proposed to develop a radiation risk recognition aided system in which various radiation information; radiation risks, radiation distribution, hazard information and so on, were visualized by CG. The system used the server and client system. In the server there were two parts; one (main-server) was the database part having various data and the other (sub-server) was the visualization part visualizing the human phantom by POV-Ray. In the client there was the input and output part. The outputs from the system were various radiation information represented by coloring, circle graph and line graph intuitionally. The system is useful for a broad range of activities including radiation protection, radiation management, dose minimization, and demonstration to the public.

  • PDF

수신신호세기의 편차 보정법을 이용한 무선센서노드 간의 거리 추정 (Ranging the Distance Between Wireless Sensor Nodes Using the Deviation Correction Method of Received Signal Strength)

  • 이진영;김중규
    • 대한임베디드공학회논문지
    • /
    • 제7권2호
    • /
    • pp.71-78
    • /
    • 2012
  • Based on the Zigbee-based wireless sensor network, I suggest the way to reduce errors between the short distance, improving the accuracy of the presumed distance by revising the deviation of RSSI(Received Signal Strength Indication) values is to estimate the distance using only the RF signal power without the additional hardware. In general, the graph measured by RSSI values shows the proximity values which are ideally reduced in proportion to the distance under the free outdoor space in which LOS(Line-Of-Sight) is guaranteed. However, if the result of the received RSSI values are each substituted to the formula, it can produce a larger margin of error and less accurate measurement since it is based upon the premise that this free space is not affected by reflected waves or obstacles caused by the ground and electronic jamming engendered by the environment. Therefore, the purpose of this study is to reduce the margin of errors between the distances and to measure the proximity values with the ideal type of graph by suggesting the way to revise the received RSSI values in the light of these reflected waves or obstacles and the electronic jamming. In conclusion, this study proves that errors are reduced by comparing the proposed deviation correction method to the revised RSSI value.

모바일 환경에서 기억법 기반 수치 정보 시스템 구현 (Implementation of Numerical Information System based on Mnemonic System in Mobile Environments)

  • 김분희
    • 한국전자통신학회논문지
    • /
    • 제11권4호
    • /
    • pp.427-432
    • /
    • 2016
  • 수치에 있어서 기억법은 숫자를 기억하는데 유용하다. 이러한 숫자와 관련된 기억법에서 점, 선, 막대 등과 같은 많은 방법들을 적용한 그래프나 이미지는 상당히 훌륭한 연상 기호의 역할을 한다. 수치와 관련된 기억법은 뇌가 원래의 형태보다 더 보유 할 수 있는 방법으로 정보를 변환하는 것과 관련된다. 이 연구의 이전 연구를 되짚어보면 수치 기억법과 관련하여 단순 그래프 알고리즘과 배열된 이미지 알고리즘을 제시했었다. 본 연구에서는 모바일 환경에서 이전 연구의 알고리즘을 적용하기 위해 기억법 기반 수치 정보 시스템을 구현하고 평가한다.

Eccentricity를 이용한 차선 검출에 관한 연구 (A Study on a Lane Detection Using Eccentricity)

  • 정태일;나심 아샤드;문광석;김종남
    • 한국정보통신학회논문지
    • /
    • 제16권12호
    • /
    • pp.2755-2761
    • /
    • 2012
  • 본 논문에서는 Eccentricity를 이용한 차선 검출 알고리듬을 제안한다. 차선 검출 알고리듬은 자동차 운전자의 안정성을 증가시키는 차선 이탈 경보 시스템 등에 활용될 수 있다. 차선 검출율을 개선하기 위하여 그래프 이론에서 소개되는 Eccentricity를 정의하고, 이를 차선 검출 알고리듬에 이용하여 Eccentricity를 계산하였다. 직선도로인 경우 Eccentricity는 1이고 1차 함수로 구현이 가능하다. 그래서 시간 복잡도와 공간 복잡도를 개선하였고, 아울러 기존의 방법들보다 차선 검출율이 향상됨을 확인하였다.

A graph-based method for fitting planar B-spline curves with intersections

  • Bon, Pengbo;Luo, Gongning;Wang, Kuanquan
    • Journal of Computational Design and Engineering
    • /
    • 제3권1호
    • /
    • pp.14-23
    • /
    • 2016
  • The problem of fitting B-spline curves to planar point clouds is studied in this paper. A novel method is proposed to deal with the most challenging case where multiple intersecting curves or curves with self-intersection are necessary for shape representation. A method based on Delauney Triangulation of data points is developed to identify connected components which is also capable of removing outliers. A skeleton representation is utilized to represent the topological structure which is further used to create a weighted graph for deciding the merging of curve segments. Different to existing approaches which utilize local shape information near intersections, our method considers shape characteristics of curve segments in a larger scope and is thus capable of giving more satisfactory results. By fitting each group of data points with a B-spline curve, we solve the problems of curve structure reconstruction from point clouds, as well as the vectorization of simple line drawing images by drawing lines reconstruction.

Power Tracing Method for Transmission Usage Allocation Considering Reactive Power

  • Han Choong-Kyo;Park Jong-Keun;Jung Hae-Sung
    • KIEE International Transactions on Power Engineering
    • /
    • 제5A권1호
    • /
    • pp.79-84
    • /
    • 2005
  • In many countries, the electric power industry is undergoing significant changes known as deregulation and restructuring. These alterations introduce competition in generation and retail and require open access to the transmission network. The competition of the electric power industry causes many issues to surface. Among them, unbundling of the transmission service is probably the most complicated as it is a single and integrated sector and the transmission revenue requirement must be allocated to market participants in a fair way. In these situations, it is valuable to research the methodologies to allocate transmission usage. The power tracing method offers useful information such as which generators supply a particular load or how much each generator (load) uses a particular transmission line. With this information, we can allocate required transmission revenue to market participants. Recently, several algorithms were proposed for tracing power flow but there is no dominant power tracing method. This paper proposes a power tracing method based on graph theory and complex-current distribution. For practicability, the proposed method for transmission usage allocation is applied to IEEE 30 buses and compared with the method proposed by Felix F.Wu.