• Journal of electromagnetic engineering and science
• /
• 제3권2호
• /
• pp.126-132
• /
• 2003

In this paper, a coupled-line type waveguide bandpass filter is newly proposed. The proposed bandpass filter configuration consists of magnetically coupled waveguide cavities. In order to show the background of the proposed waveguide bandpass filter, the general coupled line TEM bandpass filter theory, which means the coupled line filter with arbitrary coupled line length and impedance level, will be briefly introduced. Calculations for the even- and odd-mode wave impedance of a coupled line waveguide structure are achieved based on the normalized impedance concept for a broad-side coupled waveguides by using vector finite element method(VFEM) calculation. Measured result of an implemented coupled-line type waveguide filter is presented.

• 한국인터넷방송통신학회논문지
• /
• 제10권3호
• /
• pp.159-166
• /
• 2010

전력선은 이미 전 세계적으로 60% 이상의 주거지에 설치되어 있기 때문에 고속의 전력선 통신을 이용하여 인터넷 액세스를 실현하는 새로운 액세스용 회선을 부설하지 않고 광대역 서비스를 제공할 수 있다. 이러한 이유로 정보화 시대에 인터넷 망이 닿지 않는 Last Mile Solution에 가장 적합한 서비스로서 전력선 통신에 대한 연구가 이루어지고 있다. 하지만, 전력선은 통신 선로가 아니고 전력을 전송하도록 설계되었기 때문에 전자파의 누설로 부근의 무선통신 시스템에 영향을 주게 된다. 본 논문에서는 기존의 무선 통신 서비스와 전력선 통신과의 간섭을 줄이기 위하여 기존의 Notch Filter보다 성능 면에서 우수한 고성능 Notch Filter 알고리즘을 제안하였다. 또한, 고성능 Notch Filter를 적용하여 임베디드 보드를 통한 Notch Filter Emulator를 구현하였다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제51권8호
• /
• pp.368-374
• /
• 2002

In this paper, we introduce a procedure to obtain a equivalent circuit of comb-line band pass filter. By employing equivalent circuits of each asymmetrical coupled line. we composed the full equivalent circuit of comb-line bandpass filter and derived simple design equations for extracting each line's impedance. To show the validity of design equations, we simulated and fabricated a planar type comb-line bandpass filter, which has center frequency 1.8㎓, band-width 50㎒ and four resonators. The resulting filter is very compact, have broad stop band with the second pass band centered at four times the center frequency of the first pass band. The experimental results show exact performances of design specification.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2000년도 High Temperature Superconductivity Vol.X
• /
• pp.193-196
• /
• 2000

A new type low-pass filter design method based on a coupled line and transmission line theory is proposed to suppress harmonics by attenuation poles in the stop band. The design formula are derived using the equivalent circuit of a coupled transmission line. The new low-pass filter structure is shown to have attractive properties such as compact size, wide stop band range and low insertion loss. The seventh-order low-pass filter designed by present method has a cutoff frequency of 0.9 CHz with a 0.01 dB ripple level. The coupled line type low-pass filter with strip line configuration was fabricated by using a high-temperature superconducting (HTS : YBa$_2$Cu$_3$O$_{7-{\delta}}$ thin film on MgO(100) substrate. Since the HTS coupled tine type low-pass filter was proposed with five attenuation poles in stop band such as 1.8, 2.5, 4, 5.5, 6.2 GHz. The fabricated low-pass filter has improved the attenuation characteristics up to seven times of the cutoff frequency.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.371-375
• /
• 2003

In this paper, a new design method for coupled-line filters with tapped input/output has been developed. The design equations for this tapped filter have been obtained using a new equivalent circuit model of tapped lines. From an edge coupled-line filter, tapped lines replaces the input/output coupled lines which tend to have very narrow gaps (few mils). Therefore, tapped coupled-line filters tend to be less sensitive to filter fabrication tolerances and to be easily fabricated using milling tools. The new filter design algorithm allows very accurate filter design for frequencies less than 20 GHz and bandwidth less than 20%. Above 20 GHz, the filter performance can be optimized starting from the filter design algorithm in this paper. Simulation problems with 2-D EM tools to characterize filter performance at high frequencies have shown to be solved by providing a channel for the filter to eliminate higher order modes.

• 한국전자파학회논문지
• /
• 제15권11호
• /
• pp.1100-1107
• /
• 2004

본 논문에서는 다단 결합선로 여파기(edge coupled-line filter)의 입출력단을 탭 선로(tapped-line)의 형태로 구현하기 위하여 등가회로 기반의 새로운 설계법을 개발하여 적용하였다. 다단 결합선로 여파기는 입출력단의 선로 간격이 매우 좁아서(수 mil) 제작하기가 힘든 결함이 있는데, 이를 탭 선로로 대체함으로써 제작 시 오차에 덜 민감하고 밀링머신으로 쉽게 제작할 수 있도록 하였다. 또한, 본 논문에서 제안된 간단한 설계법을 사용하면 20 GHz 이하의 주파수 대역에서 20 % 이하의 대역폭 특성을 갖는 탭 선로의 파라미터를 얻을 수 있으며, 이를 바탕으로 정확한 탭 선로 여파기를 설계할 수 있다.

• 한국통신학회논문지
• /
• 제24권9A호
• /
• pp.1434-1441
• /
• 1999

본 논문에서는 Hairpin Line 여파기의 정확한 해석 및 설계를 위한 등가회로를 제시하였으며 제시된 등가회로의 유효성을 컴퓨터 시뮬레이션과 설계를 통해 입증하였다. Hairpin Line 여파기에 대한 설계식은 다양하게 제시되었으나, 인접하지 않는 소자간의 상호 연결성을 포함한 실제적으로 간단화된 등가회로는 아직 명시되고 있지 못하다. 본 논문에서는 회로 duality을 이용하여 Hairpin Line 여파기 회로의 모든 개방단자를 단락단자로 변환하고, 변환된 회로를 그래프 모델로 표시하였다. 또한 각 단자에서의 경계조건으로부터 보다 간략화된 회로모델을 구하고 역 dual구조로 변환하여 Hairpin Line 여파기에 대한 간단화된 등가회로를 유도하였다.

• Journal of Electrical Engineering and Technology
• /
• 제11권2호
• /
• pp.463-469
• /
• 2016

In this paper, the use of a dual composite right/left-handed coplanar waveguide (CPW) transmission line is proposed for the design of a band rejection filter. The notch property of the filter is achieved by combining the convex signal line with the shorted concave meander line, and the equivalent circuit model is extracted from the geometry of the unit cell for organizing the band rejection property. Then the equivalent parameters of the unit cell are analyzed to identify those behaviors. And the dispersion characteristics and energy distributions are simulated. In the end, the band rejection filter is manufactured by cascading two proposed unit cells. We show that the measurement result for the resonant frequency demonstrates good agreement with the simulation result and the band rejection filter provides a rejection performance of 17.5 dB at the stopband frequency ranging from 869 MHz to 894 MHz.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.189-191
• /
• 2005

This paper proposes an implementation of a line- voltage sensorless three-phase active power filter. The line synchronization for an active power filter does not require any additional hardware. It can be properly operated under various line-voltage variation. Current compensation is done in the time domain allowing fast time response. All control functions are implemented in software using a single-chip microcontroller, thus simplifying the control circuit. It is shown via experimental results that the proposed controller gives good performance for the line-voltage sensorless active power filter.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.387-390
• /
• 1998

We propose comb-line filter using SIR(Stepped Impedance Resonator) with two transmission line. The coupling structure of the filter is double coupled line where two coupled lines are linked with cascade. We find out the inverter function of the filter. using even and odd mode impedance. The merits of the filter are that first, we can design transmission zero point at any frequency that we wanted without using lumped elements : chip capacitors and inductors. Second, we can design small size filters. To validate the inverter function of the filter with double coupled line we designed and fabricated two-pole band pass filter with the proposed filter structure.