• Title/Summary/Keyword: Line Width

Search Result 1,548, Processing Time 0.039 seconds

A Study on Basic Costume Appearing in Genre Paintings from the Late 17th Century to the Early 18th Century : focused upon Works of DuSeo Yun and YoungSeok Cho (17C말~18C초 풍속화에 나타나는 복식에 관한 연구 - 윤두서, 조영석 작품 중심으로 -)

  • 최은주
    • The Research Journal of the Costume Culture
    • /
    • v.8 no.6
    • /
    • pp.915-929
    • /
    • 2000
  • As a result of research, the character of the general dress-costumes from the late 17th century to the early 18th century in Genre Paintings of DuSeo Yun and YoungSeok Cho is as follows. Firstly young women wore braided hair at the back of head and married women wore hair in the style of Unjeun-mori with Gache. The length of Jeogori (Korean traditional jacket) covered waistor shortened to waist length. The width of Jeongori was suitable, because side-seam line was straight or oblique as it comes into inner line. The width of Git was enough and Mokpan-git (shape of board) and Kal-kit (shape of knife) appeared, and sometimes used other color fabric. Sleeve was narrow and ostly folded up. Chima (Korean traditional skirt) used darker color fabric than Jeogori and the width of Chima was narrow and its length was short. Sokbaji (Korean traditional underpants) shown below were narrow and its end narrower. They were barefoot or they wore Hye (Korean traditional shoes) after putting on Beoseon (Korean traditional socks). Secondly general man's hair tie a topknot (sangtu) and put on headdres, 'Bang-lip', 'Mang-geon', hairband, 'Tang-geon' on head. The length of Jeogori became shorter from the line which covered hip to the line which covered waist. The width of Jeogori was suitable and sometimes it had a slit of side-seam line. The width of Git (neckand) was wide and the length of Git was long. 'Kal-git'appeared and it used other color fabric. The shape of sleeve was straight and narrow. They folded up their sleeves. They folded up their sleeves. They folded up their slack that look like 'Jam-bang-i'and the width of slacks was not suitable, and it was narrow. Baji (Korean traditional pants) were with or without knot, worn 'Hangjeon'(ankle band). They were barefoot and wore 'Hye'or 'Jipsin'(Korean traditional straw shoes). Thirdly a person of high birth or a low-ranked official put 'Yu-geon', 'Mang-geon', 'Gat', 'Tang-geon', 'Bok-du', 'Bok-geon', 'Whi-hang'on their head on a topknot. They wore 'Po (Shim-ui, Jick-ryeong'Jung-chi-mak, Do-po, etc)'on Baji and Jeogori. 'Po'was long and wide, it knot with 'Se-jo-dae'(string belt) or 'Po-baek-dae'(band belt). It had a slit of sideline and 'Mu'which had or had not or which were hard to confirm. The shape of sleeve was straight or very wide and its length was long. The width of Baji was wide and knotted with 'Hangjeon'and wore'Beoseon'and 'Hye'. Fourthly child's hair was short or knotted to the back of the head. The length of Jeogori reached waist line and its width was wide. It had a 'Jeogori'which had s slit of sideline. The shape of sleeve was 'Tong-su'(straight), and the length of sleeve was diverse. They put 'Baeja'on 'Jeogori'. The width of Baji was not wide. They wore them straight without or with knot, 'Hangjeon'. They were barefoot or put on 'Jipsin'.

  • PDF

Effect of the Number of Nozzle Scanning in Micro-Line Grooving of Glass by Powder Blasting (Powder Blasting을 이용한 유리의 미세 선형 홈 가공시 노즐 주사 횟수의 영향)

  • 박경호;김광현;최종순;박동삼
    • Proceedings of the Korean Society of Machine Tool Engineers Conference
    • /
    • 2001.04a
    • /
    • pp.294-299
    • /
    • 2001
  • The old technique of sandblasting which has been used for decoration of glass surface has recently been developed into a powder blasting technique for various materials, capable of producing micro structures larger than 100 m. This paper describes the performance of powder blasting technique in micro-line grooving of glass and the effect of the number of nozzle scanning on the depth and width of line groove. Experimental results showed that increasing the no. of nozzle scanning resulted in the increase of depth and width in grooves. Increase of width which may cause several problems in the precision machining results from wear of mask film.

  • PDF

A Study on the Nano-Lithography using FE-tip (FE-tip을 이용한 Nano-Lithography 기술에 관한 연구)

  • Choi, Je-Hyuk;Park, Sun-Woo;Kim, Chul-Ju
    • Proceedings of the KIEE Conference
    • /
    • 1999.11d
    • /
    • pp.1160-1163
    • /
    • 1999
  • In this study, we developed FE-tip lithography system that could apply to multi-tip system and did lithography using FE-tip. The software that control FE-tip lithography system, was proposed for acquiring more adaptive data to compensate the effect of fluctuation. We found that the fluctuation effect was reduced. The minimum line width was related to applied voltage and we observed a movement of Z-axis piezo stage to correct the error of this system. When FE current was 5nA, scanning speed was $3{\mu}m/sec$ and applied voltage was 200V, we made a line pattern which had minimum line width of 614 nm. If we reduce applied voltage to several decades and increase scanning speed to $20{\mu}m/sec$, it is possible to set the minimum line width of 100 nm. The proposed system can be easily applied to multi FE-tip lithography system.

  • PDF

A Study on the Variation of Collar Edge and Height according to the Angles of Collar Roll Line - Based on the Open Collar - (칼라 꺾임선(線) 눕힘각도(角度) 변화(變化)에 따른 외곽치수(外廓値數) 및 스탠드량 변화(變化)에 관(關)한 연구(硏究) - 오픈 칼라를 중심(中心)으로 -)

  • Lim, Ja-Young
    • Journal of Fashion Business
    • /
    • v.9 no.2
    • /
    • pp.143-159
    • /
    • 2005
  • This study was done to provide basic data for clothing design and thus to contribute to the academic development at the clothing and textile area and collar roll line lay down angle variation at collar width on the open collar. The study was composed as tallows: 1. The variation at collar outer wall size increase collar roll line lay down angle size the more Increase. 2. The outer wall and stand height size increase aware at variation collar width at the more Increase. It is desirable that this study will be at help to enchancement of life style in garments and promotion of garments industury by developing the archetype basic collar pattern suitable to Korean women's garments.

Effect of Line-Width of Optical Sources on Performance of Spectral Amplitude Coding Optical CDMA Systems (광원 라인폭이 Spectral Amplitude Coding Optical CDMA시스템의 성능에 미치는 영향)

  • Jhee, Yoon Kyoo
    • Journal of the Institute of Electronics and Information Engineers
    • /
    • v.52 no.2
    • /
    • pp.119-124
    • /
    • 2015
  • In this paper, we analyze the effect of line-width of optical sources on the performance of spectral amplitude coding (SAC) optical code division multiple-access (OCDMA) systems. For a performance analysis we use a symmetric balanced incomplete block design (BIBD) code as the code sequence because we can construct a series of code families by choosing different values of q and m. The ideal BIBD code (m=2) requires narrower line-width than the nonideal BIBD codes when the effective power is large ($P_{sr}=-10dBm$). But the nonideal BIBD codes (m>2) need narrower line-width than the ideal BIBD code when $P_{sr}=-25dBm$.

A Study on Water Droplet Lens Effect of UV Laser Micromachining Process (UV 레이저 미세 가공공정에서의 물 액적 렌즈 효과에 관한 연구)

  • Shin, Bo-Sung;Lee, Jung-Han
    • Journal of the Korean Society of Manufacturing Technology Engineers
    • /
    • v.21 no.5
    • /
    • pp.773-777
    • /
    • 2012
  • Recently UV laser micromachining processes is widely introduced to meet the needs of advanced components of IT, BT and ET industries. Due to the characteristics of non-contact and high-speed laser processing, UV laser micromachining is applied to manufacture very thin substrate such as polymer, metals and composite. These minimum line width obtained by UV laser micromachining is generally determined from laser wavelength, optical lens and its numerical aperture. In this paper we will show the lens effect of water droplet on the surface of workpiece to reduce the line width when UV laser light is irradiated and focused through the water droplet. Because of the refraction effect generated by the semi-spherical or spherical shape of water droplet, we can find smaller line width. And water droplet could not only protect thermal deformation, but also carry away burr around micro dent. Firstly fundamental theory of minimum line width was derived from relationship between the geometry of water droplet and laser light trace, and then experimental and simulation results will be finally compared to verify the effectiveness of water droplet lens effect of UV laser micromachining process.

Development of Roll-to-Roll Printing System for Fine Line-width Printing (미세 선폭 프린팅을 위한 롤투롤 장비 개발)

  • Kim C.H.;Ryu B.S.;Lim K.J.;Lee M.H.;Lee T.M.;Youn S.N.;Choi B.O.
    • Proceedings of the Korean Society of Precision Engineering Conference
    • /
    • 2006.05a
    • /
    • pp.583-584
    • /
    • 2006
  • Printing technology has begun to get into the spotlight in many ways due to the low cost effectiveness to existent semi-conductor process. It also has very useful application areas, not only paper printing but also patterning for LCD color tilter, Photovoltaic patterning, RFID antenna, OLED, and so on. In this study, an apparatus of gravure offset printing was developed for fine line width printing. The pattern was composed of $20{\mu}m$ size of continuous lines of which pitch size was $40{\mu}m$. The printed pattern shows that it is possible to make around $20{\mu}m$ line-width printing pattern. The roll-to-roll printing system for fine line-width printing based on primary experiment is presented. For testing of multi-layer printing, the system was designed to be capable of printing two different materials from each printing unit using gravure-offset printing method and have a function of alignment of two printed materials.

  • PDF

Extraction of Bridge Status Using Satellite Image Data (인공위성 화상데이터를 이용한 교량위치의 추출)

  • 안기원;조병진;서두천
    • Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
    • /
    • v.18 no.1
    • /
    • pp.33-40
    • /
    • 2000
  • The aim of this study is to extract bridge location(center line and width of a bridge) from SPOT XS data with 20. The boundary pixels were computed to get the mixture proportions of classes and this mixture proportions were used to extract center line and width of a bridge. The accuracy was tested by comparing the extracted bridge center line coordinate and width to the existing 1:5,000 scale national digital map and field survey data. The results of the comparison show that the measuring accuracy of the bridge center line coordinates and width are $\pm$2.9 m and $\pm$4.1 m.

  • PDF

PMR in Organic Plastic Crystals (I). Pivalic Acid (유기플라스틱 결정체의 PMR 연구 (제 1 보). 피발산)

  • Stefan J. K. Choi;John D. Graham
    • Journal of the Korean Chemical Society
    • /
    • v.19 no.3
    • /
    • pp.149-155
    • /
    • 1975
  • Pivalic acid, which has a globular shape and is a plastic crystal, has been examined by means of temperature-dependent with-line proton magnetic resonance spectroscopy. Results of temperature-dependent line width, second moment, and spin-lattice relaxation time studies of pivalic acid were interpreted in terms of dynamic behavior and hydrogen bonding. The dynamic behavior consists of superimposed reorientation of the methyl groups about their three-fold axes$(C_3) and of the molecule about the central C-C bond(C_3'),$ general molecular reorientation about the center of gravity, and molecular self-diffusion. Activation energies for the motional processes have been obtained from line width measurements using the modified Bloembergen, Purcell, and Pound theory and from spin-lattice relaxation time measurements. The results were compared with the Pople-Karasz theory of fusion and the agreement was found to be poor. The discrepancy was interpreted in terms of hydrogen bonding in this molecule.

  • PDF

A Study on Fabrication of 3D Hydroxyapatite Scaffolds Using a Laser Sintering Deposition System (레이저 소결 적층 시스템을 이용한 3차원 수산화인회석 인공지지체 제작에 관한 연구)

  • Choi, Seung-Hyeok;Sa, Min-Woo;Kim, Jong Young
    • Journal of the Korean Society of Manufacturing Process Engineers
    • /
    • v.21 no.4
    • /
    • pp.70-76
    • /
    • 2022
  • Calcium-phosphate-based bioceramics are promising biomaterials for scaffolds because they can assist in bone regeneration. In this study, a laser sintering deposition system was developed, and 3D hydroxyapatite (HA) scaffolds were fabricated. The main process conditions of the HA scaffolds were laser power, table velocity, and laser focal distance. As the laser power increased, the line width, line height, and layer thickness also increased. Further, the line width, line height, and layer thickness decreased as the table velocity increased. As the laser focal distance increased, the line width increased, but the line height and layer thickness decreased. The fabricated green scaffolds were sintered at 1050 ℃ and 1150 ℃. The sintered scaffolds had a uniform and continuous interconnected shape, with pore sizes ranging from 850 to 950 ㎛ having 53% porosity. The compressive strength of the scaffolds decreased from 0.72 MPa (1050 ℃) to 0.53 MPa (1150 ℃). The biocompatibility of the scaffolds was investigated by analyzing the adhesion of osteoblast-like MG-63 cells cultured on the surfaces of the scaffolds. The results indicate that the scaffold sintered at 1050 ℃ had good mechanical and biological properties compared to that at 1150 ℃.