• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.5
• /
• pp.96-102
• /
• 2008

Manufacturing of printed electronics using printing technology has begun to get into the hot issue in many ways due to the low cost effectiveness to existing semi-conductor process. This technology, with low cost and high productivity, can make it possible to produce printed electronics such as TFT, solar cell, RFID Tag, printed battery, and so on. In this study, apparatus of gravure-offset printing are developed for fine line-width/gap printing and the results obtained from the apparatus shows that it is possible to make around 20 micro-meter line-width/gap printing patterns. The roll-to-roll printing system for fine line-width printing based on primary experiment is presented. The printing results obtained from the system shows around 30 micro-meter line-width/gap printing patterns.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.4
• /
• pp.421-430
• /
• 2011

This study suggests the proper collar laying amount to be actively used in the clothing industry by identifying the characteristics of collar and other related components according to the collar laying amount. This study comparatively analyzed the characteristics of each collar laying amount (2cm, 2.5cm, 3cm, 3.5cm, 4cm, and 4.5cm) after making 6 tailored jackets. The results are as follows: 1. The best shape of collar and lapel appeared when the collar laying amount was 3cm and 3.5cm. 2. Depending on the collar laying amount, the shape of collar, roll line form of collar and lapel, collar width, collar stand, the position and width of roll line changed. As the collar laying amount increased, the length of collar edge became longer, and the collar stand decreased. In case the collar laying amount was small (2cm, 2.5cm), the width of collar and lapel became narrower. On the contrary, when it is large (4cm, 4.5cm), the width of collar and lapel became wider. 3. Collar laying amount as well as the length of the neck line of collar affected the shape of the collar roll line around the neck.

• Journal of Fashion Business
• /
• v.15 no.3
• /
• pp.22-31
• /
• 2011

In this study, to develop a bodice pattern for women aged 18~24 years, statistical analysis was conducted using the body measurements from 2004 Size Korea and wearing test was conducted. As a result, ease of the bust level to set a horizontal line was decided to be 4cm, that of front interscye line 0cm, and that of back interscye line 0.7~1cm. And the line which divides the horizontal baseline into halves set as the side line. The conversion formula for decision of the scye depth line in the pattern is B/6 + 3.3(cm) + ease (2.5cm), and if bust circumference is 91 or more, it should be 21cm, and if bust circumference is 76 or less, it should be 18.5cm. The back neck line width is 7cm, front neck line width 6.5cm(back neck line width -0.5cm), and front neck depth 8cm(back neck line width +1cm). The shoulder slope was set as a slope of the hypotenuse of a right-angled triangle, which went out 15cm out of the shoulder point and went down 6cm, with tan$21.7^{\circ}$. To develop a final research pattern, wearing test was performed on the primary research pattern for 21 women aged 18~24 years. As a result, the research pattern was evaluated to be significantly higher.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.08a
• /
• pp.423-428
• /
• 1999

A high precision hot strip width control method has been developed in this study by applying interstand looper tension measuring system at finishing mill stands. As with deviation of hot rolled steel strip is closely related to abnormal increase in the interstand strip tension, on-line measuring device of looped tension and data analyzing system was developed in this study. To determine dominant factors that will cause local width shortage, the logged data sets of bar width, bar thickness, looper tension, and strip thickness along the strip length were correlated with the data set of strip width change. With the result of the correlation analysis, existing sequence control logic and parameters for looper actuator were modified for strip width quality and the gains of the looper control were refined for the stable operation during the full passage of rolled strip. The on-line tension measurement and tension feedback control for looper system improved strip travelling stability and reduced strip width deviation in the srip top end region.

• Journal of Sericultural and Entomological Science
• /
• v.39 no.2
• /
• pp.174-179
• /
• 1997

The larval head capsule width, larval weight and length of mulberry longicorn beetle, Apriona germari Hope were measured when the larvae were exuviated in artificial diet rearing. The larval head capsule width from the 1st to the 12th instar was ranged from 0.12 to 0.69 cm, and growth ratio of each instar was significantly high between the 1st and the 2nd instars. The fitness to Dyar's law for the larval head capsule width was 87.6%. When the logarithum of the larval head capsule width is plotted against the number of instars, the calculated regression line was LogY=0.12086+0.06998X and Dyar's constant was 1.18. The larval weight was increased with larval developmental stages, and the coefficient of variation of larval weight was apparently high. But the calculated regression line was LogY=-0.91592+0.25959X and Dyar's constant was 1.25. The growth ration of the larval length was clearly high between the 2nd and the 3rd instars, and that of larvae from the 4th instar was decreased. The calculated regression line was LogY=-0.16932+0.09841X and Dyar's constant was 1.25. In conclusion, our results suggested that the larvae growth of mulberry longicorn beetle appeared to be highly related in the larval head capsule width, larval weight and length.

• Journal of Fashion Business
• /
• v.15 no.1
• /
• pp.80-91
• /
• 2011

The purpose of this study is to evaluate the differences of visual effects and visual images by variations in shoulder angle and shoulder width of power shoulder jacket. The stimuli are 5 samples: One control group, 2 variations of the angle of shoulder line and 2 variations of the width of shoulder line. The data has been obtained from 87 fashion design majors. The data has been analyzed by Factor Analysis, Anova, Scheffe's Test and the Correlation Analysis. The results of the study are as follows: The visual images by the angle and the width of shoulder line of power shoulder jacket are composed of 4 factors : attention, stiffness and softness, masculinity, and trendiness. Among these factors, attention factor is estimated by the most important factor. The visual effects by the angle and the width of shoulder line of power shoulder jacket are composed of 3 factors : whole silhouette, neck and arm figure, upper body figure. In these factors, the whole silhouette is estimated by the most important factor. The power shoulder jacket with extreme changes in shoulder angle has double images: it looks trendy and classy but also gives an awkward image. In case of changes in shoulder width, the visual evaluation shows big differences with the degree of expansion. The visual evaluation with variation in angle has stronger image and effect than that in width. The power shoulder jacket trend itself is also evaluated that variation in angle reflects the trend better than that in width.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.20 no.4
• /
• pp.631-646
• /
• 1996

The purpose of this study was to investigate the difference of visual evaluation about silhouette image. The specific objective were; 1) to construct of silhouette image evaluation instrument using semantic differential scale for the purpose of measuring the width and length; 2) to identify the factor structure of the silhouette; 3) to test the difference of visual perception to the silhouette as the variation of width; 4) to test the difference of visual perception to the silhouette as the variation of length; 5) to test interaction effect between width and length. The major finding were; For the visual evaluation of silhouette as shoulder width variatiorl, there were significant difference in hardness and softness factor. For the hard and soft image, we should express by variation of the shoulder width. For the visual evaluation of silhouette as skirt width variation, there were significant difference in attention factor. For the attensive image, we should express by variation of the skirt width. For the visual evaluation of silhouette as skirt length variation, there were significant difference in activity factor. For the active image, we should express by variation of the skirt length.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.251.1-251.1
• /
• 2013

Combination of oxidative vacuum annealing and oxygen plasma treatment can serve as a simple and efficient method of line-width modification of imprinted nanopatterns. Since the vacuum annealing and oxygen plasma could lead mass loss of polymeric materials, either one of the process can yield a narrowed patterns. However, the vacuum annealing process usually demands quite high temperatures (${\geq}300^{\circ}C$) and extended annealing time to get appreciable line-width reduction. Although the plasma treatment may be considered as an effective low temperature rapid process for the line-width reduction, it is also suffering for the lowered controllability on application to very fine patterns. We have found that the vacuum annealing temperature can be lowered by introducing the oxygen in the vacuum process and that the combination of oxygen plasma treatment with the vacuum annealing could yield the best result in the line-with reduction of the imprinted polymeric nanopatterns. Well-defined line width reduction by more than 50% was successfully demonstrated at relatively low temperatures. Furthermore, it was verified that this process was applicable to the nanopatterns of different shapes and materials.

• Journal of IKEEE
• /
• v.10 no.2 s.19
• /
• pp.116-122
• /
• 2006

We have built a grating-based, high-resolution, spectral line-by-line pulse shaper. By controlling individual spectral lines of a mode-locked laser output, we demonstrate the interesting functionalities of the pulse shaper for arbitrary waveform generation, such as width tunable pulse generation, phase controlled waveform generation, microwave waveform generation, etc.

• Journal of Fashion Business
• /
• v.10 no.4
• /
• pp.70-77
• /
• 2006

The purpose of this study is to evaluate the differences of visual image by variations in the location and width of the waist band of the one-piece dress. The stimuli are 24 samples: 8 variations of the location of the waist band and 3 variations of the width of the waist band. The data has been obtained from 50 fashion design majors. The data has analyzed by Factor Analysis, Anova, Scheff's Test and the MCA method. The results of the study are as follows. According to the result of factor analysis of the visual image based on the changes in the location and width of waist bands, three factors were identified- attractiveness, elegance and practicality. Among them, attractiveness was found to be the most important. The visual image was evaluated positively when waist bands were positioned above the natural waist line and negatively when waist bands were positioned below the natural waist line regardless of their width. In addition, the visual image based on the width of waist bands for one-piece dress was the most positive when the width was 4.5cm. No significant difference was observed in the visual image according to band width when the waist bands were positioned below the natural waist line. The interaction of visual image according to the location and width of waist bands for one-piece dress did not appear. As the main effect, significant differences were observed in all of the three factors according to the location of waist bands, but only two factors excluding elegance showed some difference according to the width of waist bands. When multiple classification analysis was applied to the factors without interaction, the location of waist bands appeared to have more significant effect on visual image than the width of waist bands.