• 복식문화연구
• /
• 제8권6호
• /
• pp.915-929
• /
• 2000

As a result of research, the character of the general dress-costumes from the late 17th century to the early 18th century in Genre Paintings of DuSeo Yun and YoungSeok Cho is as follows. Firstly young women wore braided hair at the back of head and married women wore hair in the style of Unjeun-mori with Gache. The length of Jeogori (Korean traditional jacket) covered waistor shortened to waist length. The width of Jeongori was suitable, because side-seam line was straight or oblique as it comes into inner line. The width of Git was enough and Mokpan-git (shape of board) and Kal-kit (shape of knife) appeared, and sometimes used other color fabric. Sleeve was narrow and ostly folded up. Chima (Korean traditional skirt) used darker color fabric than Jeogori and the width of Chima was narrow and its length was short. Sokbaji (Korean traditional underpants) shown below were narrow and its end narrower. They were barefoot or they wore Hye (Korean traditional shoes) after putting on Beoseon (Korean traditional socks). Secondly general man's hair tie a topknot (sangtu) and put on headdres, 'Bang-lip', 'Mang-geon', hairband, 'Tang-geon' on head. The length of Jeogori became shorter from the line which covered hip to the line which covered waist. The width of Jeogori was suitable and sometimes it had a slit of side-seam line. The width of Git (neckand) was wide and the length of Git was long. 'Kal-git'appeared and it used other color fabric. The shape of sleeve was straight and narrow. They folded up their sleeves. They folded up their sleeves. They folded up their slack that look like 'Jam-bang-i'and the width of slacks was not suitable, and it was narrow. Baji (Korean traditional pants) were with or without knot, worn 'Hangjeon'(ankle band). They were barefoot and wore 'Hye'or 'Jipsin'(Korean traditional straw shoes). Thirdly a person of high birth or a low-ranked official put 'Yu-geon', 'Mang-geon', 'Gat', 'Tang-geon', 'Bok-du', 'Bok-geon', 'Whi-hang'on their head on a topknot. They wore 'Po (Shim-ui, Jick-ryeong'Jung-chi-mak, Do-po, etc)'on Baji and Jeogori. 'Po'was long and wide, it knot with 'Se-jo-dae'(string belt) or 'Po-baek-dae'(band belt). It had a slit of sideline and 'Mu'which had or had not or which were hard to confirm. The shape of sleeve was straight or very wide and its length was long. The width of Baji was wide and knotted with 'Hangjeon'and wore'Beoseon'and 'Hye'. Fourthly child's hair was short or knotted to the back of the head. The length of Jeogori reached waist line and its width was wide. It had a 'Jeogori'which had s slit of sideline. The shape of sleeve was 'Tong-su'(straight), and the length of sleeve was diverse. They put 'Baeja'on 'Jeogori'. The width of Baji was not wide. They wore them straight without or with knot, 'Hangjeon'. They were barefoot or put on 'Jipsin'.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 춘계학술대회 논문집(한국공작기계학회)
• /
• pp.294-299
• /
• 2001

The old technique of sandblasting which has been used for decoration of glass surface has recently been developed into a powder blasting technique for various materials, capable of producing micro structures larger than 100 m. This paper describes the performance of powder blasting technique in micro-line grooving of glass and the effect of the number of nozzle scanning on the depth and width of line groove. Experimental results showed that increasing the no. of nozzle scanning resulted in the increase of depth and width in grooves. Increase of width which may cause several problems in the precision machining results from wear of mask film.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 C
• /
• pp.1160-1163
• /
• 1999

In this study, we developed FE-tip lithography system that could apply to multi-tip system and did lithography using FE-tip. The software that control FE-tip lithography system, was proposed for acquiring more adaptive data to compensate the effect of fluctuation. We found that the fluctuation effect was reduced. The minimum line width was related to applied voltage and we observed a movement of Z-axis piezo stage to correct the error of this system. When FE current was 5nA, scanning speed was $3{\mu}m/sec$ and applied voltage was 200V, we made a line pattern which had minimum line width of 614 nm. If we reduce applied voltage to several decades and increase scanning speed to $20{\mu}m/sec$, it is possible to set the minimum line width of 100 nm. The proposed system can be easily applied to multi FE-tip lithography system.

• 패션비즈니스
• /
• 제9권2호
• /
• pp.143-159
• /
• 2005

This study was done to provide basic data for clothing design and thus to contribute to the academic development at the clothing and textile area and collar roll line lay down angle variation at collar width on the open collar. The study was composed as tallows: 1. The variation at collar outer wall size increase collar roll line lay down angle size the more Increase. 2. The outer wall and stand height size increase aware at variation collar width at the more Increase. It is desirable that this study will be at help to enchancement of life style in garments and promotion of garments industury by developing the archetype basic collar pattern suitable to Korean women's garments.

• 전자공학회논문지
• /
• 제52권2호
• /
• pp.119-124
• /
• 2015

본 논문은 광원 라인폭이 spectral amplitude coding (SAC) OCDMA 시스템에 미치는 영향을 구하였다. q와 m값에 따라 다양한 코드를 구현할 수 있으므로 symmetric balance incomplete block design(BIBD) 코드를 분석에 사용하였다. 그 결과 입력파워가 큰 경우 ($P_{sr}=-10dBm$) 이상적인 BIBD 코드가 비이상적인 BIBD 코드보다 더 좁은 광원 라인폭이 요구되었다. 그러나 입력파워가 작은 경우 ($P_{sr}=-25dBm$)에는 그 반대로 비이상적인 BIBD 코드가 이상적인 BIBD 코드보다 더 좁은 광원 라인폭이 필요했다.

• 한국생산제조학회지
• /
• 제21권5호
• /
• pp.773-777
• /
• 2012

Recently UV laser micromachining processes is widely introduced to meet the needs of advanced components of IT, BT and ET industries. Due to the characteristics of non-contact and high-speed laser processing, UV laser micromachining is applied to manufacture very thin substrate such as polymer, metals and composite. These minimum line width obtained by UV laser micromachining is generally determined from laser wavelength, optical lens and its numerical aperture. In this paper we will show the lens effect of water droplet on the surface of workpiece to reduce the line width when UV laser light is irradiated and focused through the water droplet. Because of the refraction effect generated by the semi-spherical or spherical shape of water droplet, we can find smaller line width. And water droplet could not only protect thermal deformation, but also carry away burr around micro dent. Firstly fundamental theory of minimum line width was derived from relationship between the geometry of water droplet and laser light trace, and then experimental and simulation results will be finally compared to verify the effectiveness of water droplet lens effect of UV laser micromachining process.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.583-584
• /
• 2006

Printing technology has begun to get into the spotlight in many ways due to the low cost effectiveness to existent semi-conductor process. It also has very useful application areas, not only paper printing but also patterning for LCD color tilter, Photovoltaic patterning, RFID antenna, OLED, and so on. In this study, an apparatus of gravure offset printing was developed for fine line width printing. The pattern was composed of $20{\mu}m$ size of continuous lines of which pitch size was $40{\mu}m$. The printed pattern shows that it is possible to make around $20{\mu}m$ line-width printing pattern. The roll-to-roll printing system for fine line-width printing based on primary experiment is presented. For testing of multi-layer printing, the system was designed to be capable of printing two different materials from each printing unit using gravure-offset printing method and have a function of alignment of two printed materials.

• 한국측량학회지
• /
• 제18권1호
• /
• pp.33-40
• /
• 2000

본 연구에서는 SPOT XS데이터를 사용하여 교량위치(교량중심선, 교량폭)를 파악하고자 하였다. 이를 위하여 경계화소들의 화소내 항목혼합비를 산정한 후, 항목혼합비를 고려하여 교량중심선과 폭을 추출하는 기법을 제안 적용하였다. 인공위성 화상데이터로부터 추출된 교량위치를 국립지리원 제작의 축척 l/5,000 수치지도 및 현장측량결과와 비교ㆍ검토하였다. 비교 결과, 교량중심선의 평면 위치는 $\pm$2.9 m, 교량폭은 $\pm$4.1 m의 오차로 측정할 수 있었다.

• 대한화학회지
• /
• 제19권3호
• /
• pp.149-155
• /
• 1975

플라스틱 결정체인 피발산의 temperature-dependent wide-line NMR line width, second monent 및 spin-lattice relaxation times 의 결과는 이 결정체의 특이한 운동학적 성질 및 수소결합에 기인된 것으로 해석된다. 이 분자의 운동학적 성질은 $C_3-C_3'$ reorientation 및 self-diffusion 으로 구성 되었음을 확인했다. Wide-line NMR 연구결과는 또한 Pople-Karasz 융해설과 비교검토되었고, 이 이론과의 차이점은 피발산의 수소결합에 기인되었음을 알아냈다.

• 한국기계가공학회지
• /
• 제21권4호
• /
• pp.70-76
• /
• 2022

Calcium-phosphate-based bioceramics are promising biomaterials for scaffolds because they can assist in bone regeneration. In this study, a laser sintering deposition system was developed, and 3D hydroxyapatite (HA) scaffolds were fabricated. The main process conditions of the HA scaffolds were laser power, table velocity, and laser focal distance. As the laser power increased, the line width, line height, and layer thickness also increased. Further, the line width, line height, and layer thickness decreased as the table velocity increased. As the laser focal distance increased, the line width increased, but the line height and layer thickness decreased. The fabricated green scaffolds were sintered at 1050 ℃ and 1150 ℃. The sintered scaffolds had a uniform and continuous interconnected shape, with pore sizes ranging from 850 to 950 ㎛ having 53% porosity. The compressive strength of the scaffolds decreased from 0.72 MPa (1050 ℃) to 0.53 MPa (1150 ℃). The biocompatibility of the scaffolds was investigated by analyzing the adhesion of osteoblast-like MG-63 cells cultured on the surfaces of the scaffolds. The results indicate that the scaffold sintered at 1050 ℃ had good mechanical and biological properties compared to that at 1150 ℃.