• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.869-875
• /
• 2009

Safety is a big issue in the construction sites. For safe and secure management, tracking locations of construction resources such as labors, materials, machineries, vehicles and so on is important. The materials, machineries and vehicles could be controlled by computer, whereas the movement of labors does not have fixed pattern. So, the location and movement of labors need to be monitored continuously for safety. In general, Global Positioning System(GPS) is an opt solution to obtain the location information in outside environments. But it cannot be used for indoor locations as it requires a clear Line-Of-Sight(LOS) to satellites Therefore, indoor location monitoring system could be a convenient alternative for environments such as tunnel and indoor building construction sites. This paper presents a case study to investigate feasibility of Wi-Fi based indoor location monitoring system in construction site. The system is developed by using fingerprint map of gathering Received Signal Strength Indication(RSSI) from each Access Point(AP). The signal information is gathered by Radio Frequency Identification (RFID) tags, which are attached on a helmet of labors to track their locations, and is sent to server computer. Experiments were conducted in a shield tunnel construction site at Guangzhou, China. This study consists of three phases as follows: First, we have a tracking test in entrance area of tunnel construction site. This experiment was performed to find the effective geometry of APs installation. The geometry of APs installation was changed for finding effective locations, and the experiment was performed using one and more tags. Second, APs were separated into two groups, and they were connected with LAN cable in tunnel construction site. The purpose of this experiment was to check the validity of group separating strategy. One group was installed around the entrance and the other one was installed inside the tunnel. Finally, we installed the system inner area of tunnel, boring machine area, and checked the performance with varying conditions (the presence of obstacles such as train, worker, and so on). Accuracy of this study was calculated from the data, which was collected at some known points. Experimental results showed that WiFi-based indoor location system has a level of accuracy of a few meters in tunnel construction site. From the results, it is inferred that the location tracking system can track the approximate location of labors in the construction site. It is able to alert the labors when they are closer to dangerous zones like poisonous region or cave-in..

• Journal of the Korean Institute of Landscape Architecture
• /
• v.44 no.5
• /
• pp.12-25
• /
• 2016

In this study, in order to facilitate analysis in a continuous sequence, including the concept of the landscape experience time, countless frames of a continuous landscape were extracted. The amount of visual elements in each frame was data-converted numerically to take advantage of the quantitative data necessary for landscape planning and design was calculated in the rhythm of the sequence. In Order to shoot video with the flow of the line of sight of experience in landscape districts and landscape control points along the landscape corridor which is a continuous path, each of the corresponding computer motion techniques. This study developed a CRVP Koo computer program to effectively calculate the continuous visual number of specific landscape components by extracting uncounted frames at regular intervals, and after verifying, attempting to apply this to the target site. Through the applied result, it was possible to extract the digitized quantitative rhythm for each component of each landscape, the margin of error is very small when compared with the results of manual in photoshop, it was able to overcome the drawbacks of the manual. Using the rhythm of the derived sequence, and those close to the experience of the landscape, it was possible to achieve quantitative analysis derived from a variety of perspectives as well as was possible to be used as quantitative basis data and analysis technique for landscape planning and design.

• Korean Institute of Interior Design Journal
• /
• v.25 no.2
• /
• pp.21-29
• /
• 2016

This study has estimated the traits of conscious eye moving with the objects of the halls of subway stations. For that estimation, the observation data from eye-tracking were matched with the experiment images, while an independent program was produced and utilized for the analysis of the eye moving in the selected sections, which could provide the ground for clarifying the traits of space-users' eye moving. The outcomes can be defines as the followings. First, The application of the independently produced program provides the method for coding the great amount of observation data, which cut down a lot of analysis time for finding out the traits of conscious eye moving. Accordingly, the inclusion of eye's intentionality in the method for extracting the characteristics of eye moving enabled the features of entrance and exit of particular objects with the course of observing time to be organized. Second, The examination of eye moving at each area surrounding the object factors showed that [out]${\rightarrow}$[in], which the line of sight is from the surround area to the objects, characteristically moved from the left-top (Area I) of the selected object to the object while [in]${\rightarrow}$[out], which is from the inside of the object to the outside, also moved to the left-top (Area I). Overall, there were much eye moving from the tops of right and left (Area I, II) to the object, but the eye moving to the outside was found to move to the left-top (Area I), the right-middle (Area IV) and the right-top (Area II). Third, In order to find if there was any intense eye-moving toward a particular factor, the dominant standards were presented for analysis, which showed that there was much eye-moving from the tops (Area I, II) to the sections of 1 and 2. While the eye-moving of [in] was [I $I{\rightarrow}A$](23.0%), [$I{\rightarrow}B$](16.1%) and [$II{\rightarrow}B$](13.8%), that of [out] was [$A{\rightarrow}I$](14.8%), [$B{\rightarrow}I$](13.6%), [$A{\rightarrow}II$](11.4%), [$B{\rightarrow}IV$](11.4%) and [$B{\rightarrow}II$](10.2%). Though the eye-moving toward objects took place in specific directions (areas), that (out) from the objects to the outside was found to be dispersed widely to different areas.

• Journal of The Korean Astronomical Society
• /
• v.43 no.1
• /
• pp.9-23
• /
• 2010

In this paper we examined the association of Infrared Dark Cloud (IRDC) cores with YSOs and the geometric properties of the IRDC cores. For this study a total of 13,650 IRDC cores were collected mainly from the catalogs of the IRDC cores published from other studies and partially from our catalog of IRDC cores containing new 789 IRDC core candidates. The YSO candidates were searched for using the GLIMPSE, MSX, and IRAS point sources by the shape of their SED or using activity of water or methanol maser. The association of the IRDC cores with these YSOs was checked by their line-of-sight coincidence within the dimension of the IRDC core. This work found that a total of 4,110 IRDC cores have YSO candidates while 9,540 IRDC cores have no indication of the existence of YSOs. Considering the 12,200 IRDC cores within the GLIMPSE survey region for which the YSO candidates were determined with better sensitivity, we found that 4,098 IRDC cores (34%) have at least one YSO candidate and 1,072 cores among them seem to have embedded YSOs, while the rest 8,102 (66%) have no YSO candidate. Therefore, the ratio of [N(IRDC core with protostars)]/[N(IRDC core without YSO)] for 12,200 IRDC cores is about 0.13. Taking into account this ratio and typical lifetime of high-mass embedded YSOs, we suggest that the IRDC cores would spend about $10^4\sim10^5$ years to form high-mass stars. However, we should note that the GLIMPSE point sources have a minimum detectable luminosity of about $1.2 L_{\odot}$ at a typical IRDC core's distance of ~4 kpc. Therefore, the ratio given here should be a 100ver limit and the estimated lifetime of starless IRDC cores can be an upper limit. The physical parameters of the IRDC cores somewhat vary depending on how many YSO candidates the IRDC cores contain. The IRDC cores with more YSOs tend to be larger, more elongated, and have better darkness contrast than the IRDC cores with fewer or no YSOs.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.11
• /
• pp.1070-1077
• /
• 2011

This paper introduces a radar signal processing technique for intelligent rear view monitoring of an automobile. The linear frequency modulation-frequency shift keying(LFM-FSK) waveform, which is the combination of frequency modulation continuous wave(FMCW) and frequency shift keying(FSK) waveform, is employed to simultaneously estimate the range, relative aspect angle, and velocity of an automobile. Hence, it can be applied to monitor the rear view of an automobile. FMCW waveform has high range resolution capability, but it produces ghost targets under a multiple target environment. In contrast, FSK waveform can provide high velocity resolution and avoids the problem of ghost targets. However, it fails to identify multiple targets along the radar's line of sight. With LFM-FSK waveform, we can estimate the ranges and velocities of multiple targets with very high resolution, which avoids the ghost target problem of an FMCW waveform. Simulation result shows that LFM-FSK wavefrom is suitable for use in the lane change assistance system for an automobile.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.4
• /
• pp.819-830
• /
• 2017

An FM radio based PCL system is a passive radar technique for detecting the multiple moving targets from FM radio signals and tracking the trajectories of the targets by calculating the cross-correlation function of direct-path signal and target echo signals. However, the interference signals are received from a surveillance channel, which is designed to receive the target echo signals. Because of this problem, the target echo signals are masked by the strong interference signals and this makes it difficult to detect the true targets from the cross-correlation function. Adaptive filters are known as effective methods for suppressing the interference signals but there is a problem to present their accurate performances in the PCL system because many literatures used the cross-correlation function and the ratio of input and output power as a measure of the performance analysis. In this paper, a performance analysis method is proposed to evaluate the performance of interference cancellation algorithms. By using the property that each component of the filter weight vector is adjusted to suppress the specific interference signal, a performance measure of the interference signal suppression is defined by a function of adaptive filter weights. Based on the proposed method, we compare the performance of the adaptive filters used in the PCL system. Simulation results show that the proposed method can be very effective for evaluating the performance of interference cancellation algorithms.

• Journal of People, Plants, and Environment
• /
• v.24 no.4
• /
• pp.403-413
• /
• 2021

Background and objective: There is growing concern about the effects of modern society on mental health, coming with Covid-19-related caveats on depression, anxiety, and stress (DAS). This can be a subject to provide alternative methods which alleviate DAS. In line with this context, sensory gardens are widely acknowledged to stimulate the five major senses (sight, sound, taste, touch, and smell) and can have a significant (positive) impact on mental health. However, there is limited empirical evidence on the effect of these gardens with regard to alleviating DAS - particularly with respect to urban society This is a gab in knowledge how such limits can be addressed. Accordingly, this present study is clearly needed in order to verify if there are any correlations between sensory gardens and (positive) effects on DAS. The aim of this study was therefore to understand current levels of DAS in a high density building with a sensory garden in a courtyard and determine correlations between experiences in the sensory courtyard and levels of DAS. Methods: The Depression Anxiety and Stress Scale (DASS-21) was employed to test the level of DAS. Results: Additionally, 13 different factors associated with experiences in the building, including the stimulation of the five major senses in the sensory courtyard, were measured to reveal their contribution to mitigating depression, anxiety, and stress. It is noted that the average levels of DAS were 7.91, 7.77 and 9.01 respectively indicating that the mental health of participants requires mental health management. However, results show that factors associated with the sensory courtyard could improve mental health. For example, new social relationships, walking with colleagues, and the stimulation of each of the five major senses in the sensory garden could improve DAS. Conclusion: This illustrates that external experiences are more effective at mitigating depression, anxiety, and stress than internal ones. Factor analysis revealed four components: stimulating the five senses; internal and external facilities; internet-based device use; and new social relationships. There was a strong positive correlation between new social relationships and walking with colleagues. There were also strong positive correlations among the stimulation of each of the five senses. In conclusion, there are strong indications that sensory courtyards can help alleviate DAS and should therefore be promoted, particularly in the current Covid-19 situation wherein the physical and mental health of the public at large are threatened. Accordingly, courtyard design should be rethought in light of the relationship between the positive impact of sensory gardens and mental health.

• Korean Journal of Remote Sensing
• /
• v.34 no.3
• /
• pp.495-506
• /
• 2018

Global interest in climate change and sea level rise has led to active research on the velocities of glaciers. In studies about the velocity of glaciers, in-situ measurements can obtain the most accurate data but have limitations to acquire periodical or long-term data. Offset tracking using SAR is actively being used as an alternative of in-situ measurements. Offset tracking has a limitation in that the accuracy of observation is lower than that of other observational techniques, but it has been improved by recent studies. Recent studies in the $Uv{\hat{e}}rsbreen$ glacier area have shown that glacier altitudes decrease at a rate of 1.5 m/year. The glacier displacement velocities in this region are heavily influenced by climate change and can be important in monitoring and forecasting long-term climate change. However, there are few concrete examples of research in this area. In this study, we applied the improved offset tracking method to observe the two-dimensional velocity in the $Uv{\hat{e}}rsbreen$ glacier. As a result, it was confirmed that the glacier moved at a maximum rate of 133.7 m/year. The measruement precisions for azimuth and line-of-sight directions were 5.4 and 3.3 m/year respectively. These results will be utilized to study long-term changes in elevation of glaciers and to study environmental impacts due to climate change.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.5
• /
• pp.163-181
• /
• 2023

Improving the detection performance of facilities corresponding to the sensors of autonomous vehicles helps driving safety. In the road and transportation field, research is being conducted to improve the detection performance of sensors by road infrastructure or facilities. As part of this on the development of autonomous driving support infrastructure, the shape of traffic cones and drums to ensure sufficient LiDAR detection performance even rainy conditions and maintain the line-of-sight guidance function in construction zones improvement effect. The principle was to increase reflection performance and ensure no significant difference in shape from existing facilities. Traffic cones were manufactured in square pyramid shapes instead of cones, and drums were manufactured in hexagonal and octagonal pillar shapes instead of cylinders. LiDAR detection data for the facility was confirmed on a clear day and with 20 mm/h and 40 mm/h rainfall. The detection performance of the square pyramid-shaped traffic cone and octagonal column-shaped drum was to the existing facility. On the other hand, deviations occurred due to repeated measurements, and significance could not be confirmed through statistical analysis. By reflecting these results, future studies will seek a form in which data can be obtained uniformly despite the diversity of measurement environments.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.38 no.6
• /
• pp.106-112
• /
• 2001

Unfortunately, the area without economical efficiency, especially the far distance sea, is much lower than that of a urban area-built-up area. It should be promoted the equivalent level to a urban area in the light of future-oriented universal service. Actually, Because propagation environment of mobile communication in the sea is greatly different from that for inland focused on built-up area, a propagation prediction model in the sea should be distinguished from inland-based one. Accordingly, the purpose of this study is to suggest the propagation prediction model for the sea service as a method to minimize unnecessary facilities investment and maintenance caused by additional or new building of a base station. If mobile phone service for far distance sea is provided by expanding limited communication zone of narrow band CDMA mobile communication whose spread band FA is 1.2288MHz. Suggested propagation prediction model includes five parameters to minimize facilities investment of a base station and maximize channel capacity: equivalent line of sight, chip delay by PN code, antenna altitude, power of base station and gain of antennas. Finally, suggested propagation prediction model is simulated and, the results are examined for its utility by comparing with loss of free space.