• 제목/요약/키워드: Limitation Factor

검색결과 549건 처리시간 0.033초

지역사회 재가 노인의 기능장애 위험요인 (Risk factors for functional disability among community dwelling elderly)

  • 송현종
    • 보건교육건강증진학회지
    • /
    • 제32권3호
    • /
    • pp.109-120
    • /
    • 2015
  • Objectives: The purpose of this study was to investigate risk factors for chronic ADL, IADL disability. The study explored clinical and socio-demographic risk factors of functional status decline. Methods: Data from the Survey of Living Condition of Elderly 3-year panel study were analyzed. The study subjects were 5,928 community-dwelling people aged 65 years or older who were no disability in ADL and IADL at baseline. Predisposing factors, pathology, impairment, and functional limitations were regarded as risk factors. Logistic regression analysis was used. Results: During the 3-year study period, 3.9% participants developed chronic ADL disability, 9.4% participants were IADL disabled. After controlling for predisposing factor, the best predictors for ADL disability at 36 months were fall as a pathology factor, cognitive decline, disability judgement, lower limb functional limitation. Comorbidity, fall, cognitive decline, disability judgement, lower limb and upper limb functional limitation were risk factors for IADL disability. Conclusions: Health promotion program focusing elderly is essential to prevent ADL and IADL disability. Mobilizing physical activity should be included in health promotion program for elderly.

부하 역률을 고려한 직접부하제어 실행시 계통의 민감도 분석 (Sensitivity Analysis of the Power System Considering the Load Power Factor While using Direct Load Control)

  • 채명석
    • 전기학회논문지P
    • /
    • 제64권4호
    • /
    • pp.333-336
    • /
    • 2015
  • Recently, the power load is growing larger and because of the environmental limitation of generation, the expansion of generation facilities are becoming more difficult. For that reason the importance of the demand-side resources come to be higher. One method of the demand-side resource, the DLC Program, has executed, and moreover, the loads which are available to be controlled are increasing. It should be considered of some kinds of power system components such as DLCs, because the fact that using the demand resources will be an important part of the power system. This paper considers the power factor of the load-bus which is shedded in the direct load control program. and then analyze the power system using flow sensitivity and voltage sensitivity. In this paper, we assumed two scenarios through the rank of the load power factor at each bus and to compare and evaluate each case, we used Power World for the simulation.

내부서비스품질이 고객만족과 기업성과에 미치는 영향에 관한 연구 (A Study on the Internal Service Quality on the Internal Customer Satisfaction and the Business Performance)

  • 김선준
    • 경영과정보연구
    • /
    • 제15권
    • /
    • pp.147-164
    • /
    • 2004
  • The purpose of this paper is on employees as internal customers and the critical role this group plays in the delivery of quality results. The set up of research model for verification was as follows. The research model was drawn as internal service quality level $\Rightarrow$ internal customer satisfaction $\Rightarrow$ enterprise outcome. Then, two hypotheses were established to the research model. Through the factor analysis and multiple regression analysis, the results are as follows. First, internal service quality level turned out to be affected indirectly through internal customers' satisfaction rather than a direct factor to affect the enterprise outcome. Second, internal customers' satisfaction was proved to be the most important factor for the enterprise outcome as ti was the intimate factor precedent to the enterprise outcome. However, there could be a variation of response according to the personal circumstances of respondents since the respondents were from different enterprises and consisted various job positions and age group. Namely it included a limitation of rather unaccurate resulting values because the transverse methods were performed for convenience though it needed a longitudinal research to accomplish the general purpose of this study.

  • PDF

대형 비구면의 초정밀 가공을 위한 자동무수차점 방식의 널 렌즈 설계 및 측정 정밀도의 한계에 관한 연구 (A study for null lens design of autostigmatic type and the limitation of measurement accuracy for ultra precision manufacturing of large aspherical surface)

  • 김길선;임천석
    • 한국광학회지
    • /
    • 제16권1호
    • /
    • pp.71-78
    • /
    • 2005
  • 대형 비구면의 측정을 위하여 자동무수차점 방식의 2매 구성 널 렌즈를 설계하였고, 제작과 정렬 오차에 따른 측정 정밀도의 한계를 이론적으로 분석해 보았다. 측정 정밀도의 한계를 결정짓는 주요한 공차 요소는 널 렌즈면의 불규칙도(irregularity)임을 확인하였으며, 불규칙도의 가공 정도에 따라 5λ/100∼4λ/1000 정도까지의 신뢰할 수 있는 측정 정밀도가 한정지어졌다. 이로써 실제의 정렬 오차 및 널 렌즈 제작오차까지 고려하여 신뢰할 수 있는 정밀도 한계를 제시할 수 있었다.

지반침하 거동특성 분석을 위한 암반의 부피팽창률에 관한 연구 (An Experimental Study on the Bulking Factor of Rock Mass for Subsidence Behavior Analysis)

  • 이희중;정용복;최성웅
    • 터널과지하공간
    • /
    • 제18권1호
    • /
    • pp.33-43
    • /
    • 2008
  • 지반침하 대상지역 암반의 부피팽창률에 대한 측정방법은 국 내외적으로 아직까지 규정된 바는 없으며, 그동안 현장에서 화약발파에 의한 암반의 부피증가율로써 부피팽창률을 적용하여 시용하여 왔다. 하지만 이렇게 제시된 부피팽창률은 일정한 기준으로 분류되지 않았을 뿐만 아니라, 각각에서 제시된 값들은 암종에 따라 부피팽창률 범위 차이가 있기 때문에 지반침하 대상지역에 그대로 적용하기에는 다소 무리가 있다. 따라서 본 연구에서는 편마암, 석회암 및 셰일을 대상으로 붕락대에 영향을 미칠 수 있는 파쇄암의 적재 형태에 따른 부피팽창률과 응력에 따른 부피팽창률을 산정하기 위해 파쇄암이 적재된 상태에서 일정한 하중을 가하여 실내실험을 실시하였다.

CAPM에서 $\beta$계수이외의 변수가 시장의 이상현상에 미치는 영향 (The effect of the variables with the exception of $\beta$ on and abnormal phenomenon of the stockmarket in CAPM)

  • 이재범
    • 대한안전경영과학회지
    • /
    • 제1권1호
    • /
    • pp.231-239
    • /
    • 1999
  • CAPM explains the rate of return for the risk asset by $\beta$, systematic risk. There are some assumption in CAPM. But CAPM can not explain the movement of stock price sufficiently due to limitation of the assumptions. Therefore many scholars study which variables with the exception of $\beta$ effect on the rate of return of risk asset for supplementing this limitation by using PER, size of firm etc.. But it will be natural that PER, size of firm etc. to be determinant factors of $\beta$ also effect on the abnormal rate of return, because PER, size of firm etc. used in their studies already effect on determination of $\beta$, . That is, the determinant factors of $\beta$ effect on determination of abnormal rate of return according as $\beta$, effects on abnormal rate of return. Therefore, this study tests empirically how the determinant factors of $\beta$, effect on determination of$\beta$, ,and how $\beta$ and the determinant factor of $\beta$ effect on the abnormal rate of return in CAPM.

  • PDF

언어기호의 한계성에 대한 이상의 고발과 시적 변용 (Lee Sang′s Accusation and Poetic Transformation : On the Limitations of Language Signals)

  • 오정란
    • 인문언어
    • /
    • 제1권2호
    • /
    • pp.21-46
    • /
    • 2001
  • No one would deny that, despite the fact that they are the central factor in any given communication system, language signals have their limitations. For example, language cannot keep up with the radical changes that occur in the world and its ideas. The present meaning of a language signal is always pegged to the past when it was originally created. This limitation in turn puts limitations on the way we conceive of the world, and we have no choice but to watch the world through the refracted, darkly colored lens called language. Lee Sang′s was well aware of these limitations, and his works reflect his suspicion of language. This paper argues that Lee Sang′s "Ogamdo 1" is a poetic commentary on the ambiguity of language signals; that "Ogamdo 2" is an accusation of the stationary nature of language signals; ; and, finally, that "Sune-kwanhan-gakseo (Treatise on Lines) 7" is a poetic expression of Lee Sang′s negative view of the symbolic limitation of, and the fragmentary nature of, language signals.

  • PDF

유아·성인 관계방식이 유아의 도덕개념 형성에 미치는 영향 (The Influences of Adult-child Relationships on the Moral Concepts of Preschoolers)

  • 최보가;송미화
    • 아동학회지
    • /
    • 제19권2호
    • /
    • pp.115-132
    • /
    • 1998
  • The present study investigated the construction of the moral concepts of 3-, 4-, and 5- year old Korean children. Instruments were the Maternal Behavior Research Instrument by Schaefer for mother and feather nurturing attitudes, and the Domain Distinctiveness Model for children's moral judgments. Maternal and teacher attitudes were categorized by the affection-rejection factor consisting of affection-affection, affection-rejection, rejection-affection, and rejection-rejection dimensions, and by the permissive, -control factor consisting of permissive-permissive, permissive-control, control-permissive, and control-control dimension. Children's data were collected with an individualized interview in which children were asked to judge moral and social conventional transgression events. 30 children were assigned to each of the maternal/teacher attitude dimensions; thus, there were 120 children for each factor. Results showed that (1) the affection-affection cohort was must strongly related to moral rules using both the seriousness criterion and deserved punishment criterion, and (2) the permissive-permissive cohort was most strongly related to reasoning and action. However, this cohort did not break out of children's structural limitation (limited responses to the intangible).

  • PDF

한국인 조종사의 대표적 인체모형군 생성 (Formulation of Human Manikin Models Representative of Korean Male Pilots)

  • 이종선;송영웅
    • 대한인간공학회지
    • /
    • 제21권1호
    • /
    • pp.15-26
    • /
    • 2002
  • The anthropometric characteristics of the intended user population are most important parameters in the equipment and workplace layout design, particularly in the airplane cockpit design. Because human body is composed of multi-dimensional body segments, single 'average' or 'extreme' manikin is not sufficient in computer-aided design(CAD) environments. To overcome this limitation, we constructed a manikin group representing Korean Male pilot population. First, we identified 16 anthropometric variables which are important parameters in the evaluation of reach, visibility, and clearance. And we found their correlations and conducted a factor analysis. Four common factors were extracted in the factor analysis. The first one was related with length dimensions, the second was with the arm reach, the third was with the sitting height, and the last was with breadth-depth dimensions. Finally, 17 manikins were constructed and presented in the CAD prototype.

처리기술에 근거한 산업폐수 배출허용기준 국내 적용성 연구(III) : 국내 적용방안 및 사례 연구 (펄프·종이 및 종이제품 제조시설) (Assessment of Technology Based Industrial Wastewater Effluent Limitation and Standards for the Domestic Industry Category (III) : The Evaluation of TBEL's Applicability for Domestic Industry Categories (Case-study : Pulp, Paper, Paperboard Category))

  • 김경진;손대희;허진;김광인;김상훈;김재훈;염익태
    • 한국물환경학회지
    • /
    • 제26권3호
    • /
    • pp.377-386
    • /
    • 2010
  • Introduction of TBELs into Korean environmental regulatory system for wastewater may require very careful considerations and appropriate modifications of the TBELs applied in US. The Korean regulations for wastewater are based on uniform regulatory criteria for wastewater effluent discharge and are quite different from the individual permit system in US. In addition, the toxic pollutants regulated in Korea are much less than those in US. Therefore, the effects of TBELs application on the pollutants reduction and the economic feasibility should be carefully assessed for different categories of wastewater sources. In this study, the applicability of TBELs for the industrial categories of Korea was discussed. The TBELs were derived for a sample category, the pulp paper paperboard manufacture, based on the previously reported analytical data from 52 facilities of the domestic pulp paper paperboard manufacture in Korea. It was suggested that the BAT effluent limitations were BOD 30 mg/L, $COD_{Mn}$ 40 mg/L, SS 40 mg/L, T-N 30 mg/L and T-P 4 mg/L and that the allowable effluent loads were $0.31{\sim}1.75kgCOD_{Mn}/ton$-products. Due to the limitation of insufficient data, there were difficult to obtain the important factors to derive more systematic and accurate limitation standards for the pollutants such as the 'Long Term Average (LTA)', the 'Product Normalized Discharge Flow (PNDF)', and the 'Variability Factor (VF)'. However, as the first trial of TBELs determination based on the all available analytical data reported, the procedure and the outcome of the study may provide valuable insight on application of TBELs in Korea.