• 한국의류산업학회지
• /
• 제6권1호
• /
• pp.32-40
• /
• 2004

This study is done to assist in the limit of stage dress design research considering the sense of the times and the sympathy of spectators for actual stage. For the base research, to visualize the image which the spectators are feeling from Shakespeare's Hamlet, the evaluators had to analyze the whole image and color tone of the figures. First of all, 2 clothing for Hamlet, Gertrude and Ophelia had to be designed, and following conclusion has drawn. Hamlet A corresponds with passive looks which is a combination of loneliness, sadness and the unstable mental state of not adapting to and hiding from the reality. Hamlet B has more of matured looks which make Hamlet more free and comfortable from life and death as he overcame a crisis of death. Gertrude A corresponds with the image of coming right out of the funeral of late king. Gertrude B shows more of her sadness as she hears of her son Hamlet's despair and resentment and her maternal return degradation which is a special situations emphasizing her unstable and dizzy image. Ophelia A shows her usual and normal looks of a livelihood and femininity. She congratulates the wedding and coronation, and falls in love with Hamlet which shows a lot of her girlish image. Ophelia B shows dismantled rationality and violated virginity which is a very complex and unstable state showing a completely different image. Based on the above research. It was proposed their clothing through the next study of the characters, and personally make them for 2003 Yeonheedan Street Group's performance Hamlet.

• 콘크리트학회논문집
• /
• 제23권6호
• /
• pp.731-740
• /
• 2011

KCI 2007, ACI 318-08에 제시된 모멘트재분배 방법은 등분포 중력하중을 받는 연속 휨재에 대하여 검증된 방법이다. 횡하중에 의한 모멘트재분배 및 비탄성 거동은 중력하중과 전혀 다른 메커니즘을 발생된다. 이 연구에서는 기초역학에 근거하여 중력하중과 횡하중을 받는 철근콘크리트 모멘트골조의 보에 발생되는 모멘트재분배와 소성변형의 관계를 정량화하고, 이로부터 보의 소성변형능력에 근거한 모멘트재분배 설계법을 제안하였다. 제안된 모멘트재분배비는 KCI 2007, ACI 318-08 등 기존 설계기준과 마찬가지로 극한한계상태의 단면해석으로 결정되는 철근의 인장변형률로 정의된다. 또한 모멘트재분배비는 경간, 철근비, 단면강성, 변형경화 거동에 의하여 영향을 받는다. 제안된 방법을 사용하여 탄성해석으로 구한 설계모멘트를 재분배시키는 설계 가이드라인 및 예제를 제시하였다.

• 한국추진공학회지
• /
• 제2권1호
• /
• pp.13-20
• /
• 1998

다목적으로 활용할 수 있는 터보축엔진의 개발을 위한 정상상태 및 동적모사 프로그램을 개발하였다. 개발비, 개발시간, 개발위험도의 절감을 위해 가스발생기 부분은 성능이 잘 알려진 기존의 터어보제트 엔진을 활용하였으며 수명연장을 위해 터빈재질을 교체하고, Larson-Miller 곡선을 이용하여 약 3000hr 이상의 수명을 확보하기 위한 최대회전속도와 최대 터빈입구온도를 결정하였다. 추가되는 동력터어빈의 구성품 성능선도는 압축기 터어빈의 성능선도를 축척하여 사용하였다. 정상상태 성능해석에는 유량 및 일평형 방정식을 이용하였으며, 가스발생기와 동력터빈의 공회전 상태에서부터 최대 회전속도까지 동력터빈은 10% 간격, 가스발생기는 5%RPM 간격으로 해석하였다. 동적모사시에는 일정유량평형방법(Constant Flow Method : CMF)을 이용하였으며, 급 가속의 상황을 가정하고 연료유량이 Step 증가하도록 Scheduling 하였다. 이 때 터빈 입구온도에 오버슈트가 발생하여 제한온도를 초과하는 것을 확인할 수 있었다.

• 한국수소및신에너지학회논문집
• /
• 제33권5호
• /
• pp.574-582
• /
• 2022

A lithium-ion battery exhibits high energy density but has many limitations due to safety issues. Currently, as a solution for this, research on solid state batteries is attracting attention and is actively being conducted. Among the solid electrolytes, sulfide-based solid electrolytes are receiving much attention with high ion conductivity, but there is a limit to commercialization due to the relatively high price of lithium sulfide, which is a precursor material. This study focused on the possibility of relatively inexpensive and light lithium hydride and conducted an experiment on it. In order to analyze the characteristics of LiAlH₄, ion conductivity and thermal stability were measured, and a composites mixed with PVDF, a representative polymer electrolyte, was synthesized to confirm a change in characteristics. And metallurgical changes in the material were performed through XRD, SEM, and BET analysis, and ion conductivity and thermal stability were measured by EIS and LFA methods. As a result, Li₃AlH₆ having ion conductivity higher than LiAlH₄ is formed by the synthesis of composite materials, and thus ion conductivity is slightly improved, but thermal stability is rapidly degraded due to structural irregularity.

• 한국재료학회지
• /
• 제14권8호
• /
• pp.595-599
• /
• 2004

We investigated the structural, electrical and magnetic properties of Mn-doped $CuAlO_2$ delafossite ceramics ($CuAl_{1-x}Mn_{x}O_2,\;0\le\;x\;\le0.05$), synthesized by solid-state reaction method in an air atmosphere at a sintering temperature of $1150^{\circ}C$. The solubility limit of Mn ions in delafossite $CuAlO_2$ was found to be as low as about 3 $mol\%$. Positive Hall coefficient and the temperature dependence of conductivity established that non-doped $CuAlO_2$ ceramic is a variable-range hopping p-type semiconductor. It was found that the Mn-doping in $CuAlO_2$ rapidly reduced the hole concentration and conductivity, indicating compensation of free holes. The analysis of the magnetization data provided an evidence that antiferromagnetic superexchange interaction is the dominant mechanism of the exchange coupling between Mn ions in $CuAl_{1-x}Mn_{x}O$ alloy, leading to an almost paramagnetic behavior in this alloy.

• 한국전기전자재료학회논문지
• /
• 제25권12호
• /
• pp.1000-1003
• /
• 2012

The superconducting fault current limiter (SFCL) can quickly limit the fault current shortly after the short circuit occurs and recover the superconducting state after the fault removes and plays a role in compensating the voltage sag of the sound feeder adjacent to the fault feeder as well as the fault current limiting operation of the fault feeder. Especially, the flux-lock type SFCL with an isolated transformer, which consists of two parallel connected coils on an iron core and the isolated transformer connected in series with one of two coils, has different voltage sag compensating and current limiting characteristics due to the winding direction and the inductance ratio of two coils. The current limiting and the voltage sag compensating characteristics of a SFCL using a transformer winding were analyzed. Through the analysis on the short-circuit tests results considering the winding direction of two coils, the SFCL designed with the additive polarity winding has shown the higher limited fault current than the SFCL designed with the subtractive polarity winding. It could be confirmed that the higher fault current limitation of the SFCL could be contributed to the higher load voltage sag compensation.

• Bulletin of the Korean Chemical Society
• /
• 제31권7호
• /
• pp.1968-1972
• /
• 2010

Pt-Co alloy nanowire array was directly synthesized by electrochemical deposition with polycarbonate template at -1.0V and subsequent chemical etching of the template. The use of Pt-Co alloy nanowire array-modified electrode (Pt-Co NAE) for the determination of morphine (MO) is described. The morphology of the Pt-Co alloy nanowire array has been investigated by scanning electron microscopy (SEM) and energy disperse X-ray spectroscopy (EDS) analysis), respectively. The resulting Pt-Co NAE offered a linear amperometric response for morphine ranging from $2.35\times10^{-5}$ to $2.39\times10^{-3}$ M with a detection limit of $7.83\times10^{-6}$ M at optimum conditions. This sensor displayed high sensitivity and long-term stability.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.583-591
• /
• 2005

The ship plating is generally subjected to combined in-plane load and lateral pressure loads. In-plane loads include axial load and edge shear, which are mainly induced by overall hull girder bending and torsion of the vessel. Lateral pressure is due to water pressure and cargo. These load components are not always applied simultaneously, but more than one can normally exist and interact. Hence, for more rational and safe design of ship structures, it is of crucial importance to bitter understand the interaction relationship of the buckling and ultimate strength for ship plating under combined loads. Actual ship plates are subjected to relatively small water pressure except for the impact load due to slamming and panting etc. The present paper describes an accurate and fast procedure for analyzing the elastic-plastic large deflection behavior up to the ultimate limit state of ship plates under combined loads. In this paper, the ultimate strength characteristics of plates under axial compressive loads and lateral pressure loads are investigated through ANSYS elastic-plastic large deflection finite element analysis with varying lateral pressure load level.

• 한국산업융합학회 논문집
• /
• 제15권1호
• /
• pp.5-11
• /
• 2012

The Buckling of the member under compressive stress is likely to occur, which is an important factor determining the strength of structures. The objective of this study was to evaluate the member buckling strength of a circular hollow steel with ball joints and to compare with design specifications for load resistance factor of our country. Furthermore, we would like to suggest basic data for evaluation of buckling length of a circular hollow steel with ball joints according to comparative analysis. These results were summarized as follows: Buckling stress according to the test results on buckling was 1.21 times greater than LSD specifications of our country estimated the entire length of circular hollow steel with ball joints as buckling length. In addition, it was 1.16 times greater than when estimating the length except the ball as buckling length and 1.14 times grater than when excluding the ball and sleeve. Therefore, when estimating buckling stress of circular hollow steel with ball joints, their buckling length may be measured by the length except ball and sleeve.

• 대한물리의학회지
• /
• 제9권1호
• /
• pp.83-91
• /
• 2014

PURPOSE: The purpose of this study was to investigate the effects of task oriented circuit exercise(TOCE) on the balance and cognition in mild dementia patients. METHODS: The subjects of the study were 30 patients with mild dementia and assigned to the TOCE(task oriented circuit exercise) group(n=15) and aerobic exercise(AE) group(n=15). TOCE group performed six task three times weekly for 12 weeks. AE group underwent the cycle ergometer and treadmill exercise three times a week during the experimental period respectively. Timed up and go test(TUG), Berg balance scale(BBS) and AP1153 Biorescue were used to assess the parameters for the balance. Korean-mini mental state examination and Global deterioration scale(GDS) were used to assess the parameters for the cognition. For the statistical analysis, paired t-test and independent t-test were used to compare the differences among two groups. RESULTS: Each group showed improvement in balance and possibility for improving cognitive function. TOCE group especially, there were significant improvements in limit of stability. CONCLUSION: The results of the study suggest that TOCE is a more diverse exercise programs introduced in the study. Furthermore, TOCE can be a helpful to improve the balance and cognition in mild dementia patients.