Browse > Article
http://dx.doi.org/10.4334/JKCI.2011.23.6.731

Redistribution of Negative Moments in Beams Subjected to Lateral Load  

Eom, Tae-Sung (Dept. of Architecture, Catholic University of Daegu)
Publication Information
Journal of the Korea Concrete Institute / v.23, no.6, 2011 , pp. 731-740 More about this Journal
Abstract
Provisions for the redistribution of negative moments in KCI 2007 and ACI 318-08 use a method for continuous flexural members subjected to uniformly-distributed gravity load. Moment redistributions and plastic rotations in beams of reinforced concrete moment frames subjected to lateral load differ from those in continuous flexural members due to gravity load. In the present study, a quantitative relationship between the moment redistribution and plastic rotation is established for beams subjected to both lateral and gravity loads. Based on the relationship, a design method for the redistribution of negative moments is proposed based on a plastic rotation capacity. The percentage change in negative moments in the beam was defined as a function of the tensile strain of re-bars at the section of maximum negative moment, which is determined by a section analysis at an ultimate state using KCI 2007 and ACI 318-08. Span, reinforcement ratio, cracked section stiffness, and strain-hardening behavior substantially affected the moment redistribution. Design guidelines and examples for the redistribution of the factored negative moments determined by elastic theory for beams under lateral load are presented.
Keywords
moment redistribution; plastic rotation; lateral load; limit state design; reinforced concrete;
Citations & Related Records
Times Cited By KSCI : 6  (Citation Analysis)
연도 인용수 순위
1 CEB-FIP 1990, Model Code 1990 for Concrete Structures, Comite Euro-International du Beton, Bulletin d'Information n. 213/214, Lausanne, May 1993, 437 pp.
2 Mattock, A. H., "Redistribution of Design Bending Moments in Reinforced Concrete Continuous Beams," Proceedings of the Institution of Civil Engineers, London, Vol. 13, 1959, pp. 35-46.   DOI
3 엄태성, 김재요, "특수모멘트골조를 가진 이중골조시스템을 위한 부재소성변형 평가," 한국지진공학회논문집, 14권, 5호, 2010, pp. 41-51.   과학기술학회마을   DOI   ScienceOn
4 엄태성, 박홍근, "모멘트골조의 내진설계를 위한 부재 소성변형 요구량 예측," 한국지진공학회논문집, 13권, 5호, 2009, pp. 51-60.   과학기술학회마을   DOI   ScienceOn
5 엄태성, 박홍근, "지진하중을 받는 철근콘크리트 모멘트 골조의 모멘트재분배와 소성변형," 콘크리트학회 논문집, 21권, 2호, 2009, pp. 217-226.
6 Paulay, T. and Priestley, M. J. N., Seismic Design of Reinforced Concrete and Masonry Buildings, John Wiley and Sons, Inc., 1992, 744 pp.
7 엄태성, 박홍근, 김창수, "다단계 선형해석을 이용한 철근콘크리트 모멘트골조의 내진설계," 대한건축학회논문집-구조계, 24권, 12호, 2008, pp. 11-18.   과학기술학회마을
8 Priestley, M. J. N., "Performance Based Seismic Design," Proceedings of the 12th World Conference on Earthquake Engineering, Paper No. 2831, Auckland, N. Z., 2000.
9 Mast, R. F., "Unified Design Provision for Reinforced and Prestressed Concrete Flexural and Compression Members," ACI Structural Journal, Vol. 89, No. 2, 1992, pp. 185-199.
10 Cohn, M. Z., "Rotational Compatibility in the Limit Design of Reinforced Concrete Continuous Beams," Flexural Mechanics of Reinforced Concrete, SP-12, American Concrete Institute/American Society of Civil Engineers, Farmington Hills, MI, 1965, pp. 359-382.
11 이승배, 장수연, 김상식, 이진섭, "인장증강효과를 고려한 철근콘크리트 보의 유효휨강성 평가," 콘크리트학회 논문집, 17권, 6호, 2005, pp.1033-1042.   과학기술학회마을   DOI   ScienceOn
12 Carmo, R. and Lopes, S., "Ductility and Linear Analysis with Moment Redistribution in Reinforced High-Strength Concrete Beams," Canadian Journal of Civil Engineering, Vol. 32, No. 1, 2005, pp. 194-203.   DOI   ScienceOn
13 Shakir, A. and Rogowsky, D., "Evaluation of Ductility and Allowable Moment Redistribution in Reinforced Concrete Structures," Canadian Journal of Civil Engineering, Vol. 27, No. 6, 2000, pp. 1286-1299.   DOI   ScienceOn
14 윤형재, 이승배, 김상식, 김강수, 장수연, "철근의 부착상태에 따른 철근콘크리트 연속보에서의 모멘트재분배에 대한 실험적 검증," 콘크리트학회 논문집, 20권, 1호, 2008, pp. 23-33.   과학기술학회마을   DOI   ScienceOn
15 한국콘크리트학회, 콘크리트 구조설계기준, 기문당, 2007, 327 pp.
16 고만영, 김상우, 김진구, 이정윤, "고강도 철근콘크리트 보의 모멘트재분배에 관한 연구," 대한건축학회논문집-구조계, 17권, 9호, 2001, pp. 9-15.   과학기술학회마을
17 ACI Committee 318, Building Code Requirements for Structural Concrete (ACI 318-08) and Commentary, American Concrete Institute, Farmington Hills, MI, 2008, 473 pp.
18 European Committee for Standardization, Eurocode 2: Design of Concrete Structures - Part 1-1: General Rules and Rules for Buildings. BS EN 1992-1-1: 2004, British Standards Institute, London, UK. 2004, 230 pp.
19 CSA, Design of Concrete Structures for Buildings. Standard A23.3-94, Canadian Standards Association, Rexdale, Ont. 1994, 199 pp.