• Coupled systems mechanics
• /
• 제7권1호
• /
• pp.79-93
• /
• 2018

The process of material failure i.e. cracks development and their propagation in an experiment related to the bending collapse of cross laminated timber plate with ribs is described. Numerical simulation of such an experiment by the nonlinear finite element method is presented. The numerical model is based on Hashin failure criteria, initially developed for unidirectional composites, and on material softening concept applied by the smeared crack approach. It is shown that such a numerical model can be used for an estimation of the limit load and the limit displacement of a cross laminated timber ribbed plate.

• 대한기계학회논문집A
• /
• 제31권6호
• /
• pp.710-717
• /
• 2007

This paper presents plastic limit loads and approximate J-integral estimates for circumferential part-through surface crack at the interface between elbows and pipes. Based on finite element limit analyses using elastic-perfectly plastic materials, plastic limit moments under in-plane bending are obtained and it is found that they are similar those for circumferential part-through surface cracks in the center of elbow. Based on present FE results, closed-form limit load solutions are proposed. Welds are not explicitly considered and all materials are assumed to be homogeneous. And the method to estimate the elastic-plastic J-integral for circumferential part-through surface cracks at the interface between elbows and straight pipes is proposed based on the reference stress approach, which was compared with corresponding solutions fur straight pipes.

• 한국해안·해양공학회논문집
• /
• 제26권1호
• /
• pp.33-40
• /
• 2014

극한 해양 환경하중을 고려한 해상풍력터빈 지지구조물에 대한 신뢰성 해석을 수행하였다. 신뢰성 해석을 위한 한계상태함수는 mud-line에서 지지구조물의 동적응답으로 정의되며, 동적응답은 정적응답과 동적응답계수의 곱으로 정의된다. 동적응답계수는 설계조건에서의 동적 시간이력응답을 분석하여 구할 수 있다. 허브(Hub) 위치에 작용하는 추력은 GH_Bladed를 사용하여 계산하였으며, 정적하중으로 적용하였다. 동적응답계수는 대수정규분포, 지반물성 중 내부마찰각은 상한과 하한이 결정된 베타분포이며, 그 외 설계변수는 정규분포 확률변수로 취급되었다. mud-line 에서의 동적응답을 통해 정의된 한계상태함수에 따라 일계신뢰도법(First order reliability method, FORM)을 사용하여 해상풍력터빈 지지구조물의 신뢰도지수를 산정하였다.

• 전기학회논문지
• /
• 제62권1호
• /
• pp.21-28
• /
• 2013

The paper proposes an optimal sizing method of a customer's battery energy storage system (BESS) which aims at managing the electricity demand of the customer to minimize electricity cost under the time of use(TOU) pricing. Peak load limit of the customer and charging and discharging schedules of the BESS are optimized on annual basis to minimize annual electricity cost, which consists of peak load related basic cost and actual usage cost. The optimal scheduling is used to assess the maximum cost savings for all sets of candidate capacities of BESS. An optimal size of BESS is determined from the cost saving curves via capacity of BESS. Case study uses real data from an apartment-type factory customer and shows how the proposed method can be employed to optimally design the size of BESS for customer demand management.

• Structural Engineering and Mechanics
• /
• 제59권5호
• /
• pp.853-866
• /
• 2016

This paper examines a methodology for computing the probability of structural failure of reinforced concrete beams subjected to fire. The significant load variables considered are dead load, sustained live load and fire temperature. Resistance is expressed in terms of moment capacity with random variables taken as yield strength of steel, concrete class (or grade of concrete), beam width and depth. The flexural capacity is determined based on the design equations recommended in Indian standard IS456:2000. Simplified method named $500^{\circ}C$ isotherm method detailed in Eurocode 2 is incorporated for fire design. A transient thermal analysis is conducted using finite element software ANSYS$^{(R)}$ Release15. Reliability is evaluated from the initial state to 4h of fire exposure based on the first order reliability method (FORM). A procedure is coded in MATLAB for finding the reliability index. This procedure is validated with available literature. The effect of various parameters like effective cover, yield strength of steel, grade of concrete, distribution of reinforcement bars and aggregate type on reliability indices are studied. Parameters like effective cover of concrete, yield strength of steel has a significant effect on reliability of beams. Different failure modes like limit state of flexure and limit state of shear are checked.

• 한국정밀공학회지
• /
• 제19권12호
• /
• pp.127-133
• /
• 2002

The objective of this study is to investigate fatigue life and fatigue crack propagation behavior The experiment of fatigue life for MMC have been carried out for the stress ratio R＝0.1 at 20Hz. Fatigue lift limit of AC4CH alloy is about 70 ㎫ and Fatigue limit of MMC has been increment to 120 ㎫, therefore, fatigue limits of MMC is about 71 % higher than that of AC4CH alloy Crack propagation tests on half-size CT specimen of thickness 12.5mm were conducted by using sinusoidal waveform. The crack length was monitored by compliance method. Test conditions were at 0.1 and 0.05 of load ratio at 10Hz of loading frequency and test load was 2.3kN. The effects of stress ratio on the fatigue crack propagation behavior for MMC was discussed within the Paris law. As the results of this study, Fatigue crack propagation increased with increasing the load ratio.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제48권12호
• /
• pp.715-726
• /
• 1999

This paper estimates the capacity of shunt type active power filters(APF) for harmonic/reactive power compensation with a thyristor converter load. The base capacity requirement of APF is defined for idealized converter load current waveform and the effect of commutation overlap on the APF capacity is examined. The APF capacity required for reactive power compensation in addition to the harmonic elimination is estimated to give maximum achievable power factor for various operating condition of the partially-loaded thyristor converter. The method of current limit of APF is introduced, and it is shown that the APF capacity can be considerably reduced by deliberately limiting the peak current while maintaining the filtering performance to meet the level std 519 regulation.

• 한국기계가공학회지
• /
• 제9권1호
• /
• pp.35-41
• /
• 2010

An overload limiter is used to prevent its overturning accident during an operation of a movable crane. Recently the indirect measuring method, which measures hoisting load and overturning moment of overload limiter, demands instead of the existing method, which measures only hoisting load. The indirectly measuring method is how to conduct the hoisting load and overturning moment as measuring the load of hydraulic cylinder for a luffing driving of boom. So we need to develop the multi-angular pin type load cell with the measuring angle of ${\pm}10$ degree instead of the existing load cell with the measuring angle of ${\pm}2$ degree. In this study the finite element analysis is conducted to evaluate the effect of the aspect ratio of measuring cross section on the measuring limit of the load cell to develop the many-angular pin type load cell. For this investigation, the aspect ratio of measuring cross section and load applying angle were adopted as design parameters and the stresses of measuring part were evaluated for each parameter.

• Journal of Electrical Engineering and Technology
• /
• 제9권1호
• /
• pp.80-89
• /
• 2014

A stochastic optimal power flow (S-OPF) model considering uncertainties of load and wind power is developed based on chance constrained programming (CCP). The difficulties in solving the model are the nonlinearity and probabilistic constraints. In this paper, a limit relaxation approach and an iterative learning control (ILC) method are implemented to solve the S-OPF model indirectly. The limit relaxation approach narrows the solution space by introducing regulatory factors, according to the relationship between the constraint equations and the optimization variables. The regulatory factors are designed by ILC method to ensure the optimality of final solution under a predefined confidence level. The optimization algorithm for S-OPF is completed based on the combination of limit relaxation and ILC and tested on the IEEE 14-bus system.

• 한국학교수학회논문집
• /
• 제26권2호
• /
• pp.87-110
• /
• 2023

이 연구에서는 반복읽기와 소리내어 읽기를 결합한 소리내어 반복읽기를 수학과 교수·학습 방법으로 제안하고, 소리내어 반복읽기가 학생의 학업성취도와 인지부하에 미치는 영향을 살펴보고자 하였다. 또한 수학과 교수·학습 방법으로서 소리내어 반복읽기에 대한 시사점을 탐색해 보고자 하였다. 이를 위하여 중학교 3학년 학생 4명과 고등학교 1학년 학생 4명을 대상으로 '함수의 극한' 단원과 '경우의 수/순열' 단원에 대해 소리내어 반복읽기를 실시하고 학업성취도와 인지부하가 어떻게 변하는지 분석하는 사례 연구를 진행하였다. 그 결과, 연구에 참여한 모든 학생들은 소리내어 반복읽기가 누적됨에 따라 학업성취도와 인지부하에서 긍정적인 변화를 보였다. 단원별로 비교했을 때, 경우의 수/순열 단원에 비해 함수의 극한 단원의 학업성취도가 낮았으며 인지부하 측면에서도 함수의 극한 단원에서 학생들이 더 높은 인지부하를 드러냈다. 학년별로 비교했을 때, 인지부하에서는 큰 차이가 없었으나 두 단원 모두 고등학교 1학년 학생 4명의 학업성취도가 중학교 3학년 학생 4명에 비해 높았다. 학년별 학업성취도는 특히 함수의 극한 단원에서 큰 차이가 있었지만 그 격차는 소리내어 반복읽기를 진행할수록 줄어들었다.