• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1998년도 봄 학술발표회 논문집
• /
• pp.33-40
• /
• 1998

Although a structural analysis based on e linear elastic theory yields good results for deformations and stresses produced by working loads, it fails to assess the teal load-carrying of the plates on the verge of yielding. In case of a limit analysis of plates, the yield line theory is widely used on the basis of the upper bound theorem and theoretically it overestimates the strength of the plate. There is, therefore, a general need for analytical methods of predicting the inelastic behavior and load-carrying capacities of plate subjected to arbitrary loadings and boundary conditions. The $\rho$-version of finite element method has been presented for determining the accurate limit load of plates. The numerical results by $\rho$-version model compares with the results obtained by the h-version software ADINA as well as with the available analytical solutions in literatures.

• 한국자동차공학회논문집
• /
• 제6권5호
• /
• pp.1-9
• /
• 1998

The analysis concerns collapse behavior of framed vehicle models with the change of design parameters at the initial stage of conceptual design. Collapse analysis of a vehicle model with framed structures has been carried out using finite element limit analysis. The analysis makes sequential changes of design parameters from an initial model with frames of uniform section so as to stage then weak parts. As a result of those design changes, the collapse load of a model has been increased and the deflection toward a passenger room has been reduced. The results demonstrate the versatility of finite element limit analysis as a tool that confirms the safety of vehicle models.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.673-678
• /
• 2010

In this paper, the limit load of granular materials was evaluated considering unsaturated shear strength. The unsaturated shear strength parameters were estimated using the results from triaxial compression test and soil-water characteristic curves test. In addition, the limit load of different rates of materials was compared. Also, two important design parameters, yield and failure load were defined utilizing 2-D nonlinear finite element analysis respectively.

• Structural Engineering and Mechanics
• /
• 제71권2호
• /
• pp.165-173
• /
• 2019

This paper investigates the probability of failure of reinforced concrete beams for limit state of collapse for flexure and shear. The influence of randomness of the variables on the failure probability is also examined. The Indian standard code for plain and reinforced concrete IS456:2000 is used for the design of beams. Probabilistic models are developed for flexure and shear according to IS456:2000. The loads considered acting on the beam are live load and dead load only. Random variables associated with the limit state equation such as grade of concrete, grade of steel, live load and dead load are identified. Probability of failure is evaluated based on the limit state equation using First Order Reliability Method (FORM). Importance of the random variables on the limit state equations are observed and the variables are accordingly reduced. The effect of the reduced parameters is checked on the probability of failure. The results show the role of each parameter on the design of beam. Thus, the Indian standard guidelines for plain and reinforced concrete IS456:2000 is investigated with the probabilistic and risk-based analysis and design for a simple beam. The results obtained are also compared with the literature and accordingly some suggestions are made.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1836-1841
• /
• 2007

Based on three-dimensional (3-D) FE limit analyses, this paper provides plastic limit and TES(Twice-Elastic-Slope) loads for pipe bends under combined pressure and out-of-plane bending. The plastic limit loads are determined from FE limit analyses based on elastic-perfectly-plastic materials using the small geometry change option, and the FE limit analyses using the large geometry change option provide TES plastic loads. A wide range of parameters related to the bend geometry is considered. Based on the FE results, closed-form approximations of plastic limit and TES plastic load solutions for pipe bends under out-of-plane bending are proposed.

• 한국전산구조공학회논문집
• /
• 제22권6호
• /
• pp.549-555
• /
• 2009

본 논문에서는 굽힘과 내압이 가해질 때 미터밴드의 한계하중을 3차원 유한요소해석을 이용하여 연구하였다. 재료는 탄성-완전 소성재료로 가정하였고, 기하학적 선형과 비선형 효과를 고려하여 소성 한계하중을 결정하였다. 본 연구를 위한 해석에서는 다양한 범위의 형상 변수가 고려되었다. 유한요소해석 결과를 바탕으로 굽힘에 관한 보간식을 제시하였다.

• 한국안전학회지
• /
• 제27권5호
• /
• pp.42-48
• /
• 2012

Peel-tension fatigue experiments were conducted for investigating on fatigue strength of mechanical press joints of SPCC steel sheet used in the field of the automobile industry. In addition, finite element method analysis on the peel-tension specimen was conducted using HyperMesh and ABAQUS softwares. The cold rolled mild steel was used to join the T-shaped peel-tension specimen with a button diameter of 5.4 mm and a punch diameter of 8.3 mm. The fatigue limit load amplitude was found to be 112.4 N at the number of cycles 106, indicating that the ratio of fatigue limit load to static peel-tension strength was about 8%. This value suggests that the mechanical press joint is highly vulnerable to peel-tension load rather than to tensile-shear load, considering that the ratio of fatigue limit load to static tensile-shear strength was about 43%. Fatigue failure mode was found to be interface-failure mode.

• 한국해안·해양공학회논문집
• /
• 제31권6호
• /
• pp.351-355
• /
• 2019

무공케이슨 방파제의 한계상태설계를 위한 하중저항계수를 제시하였다. 전국 항만의 16개 방파제에 대한 신뢰성해석을 수행하여 부분안전계수를 산출하였으며 이를 하중과 저항계수로 전환하였다. 개별적으로 구한 하중저항계수에 최적화기법을 적용하여 최종 하중저항계수를 보정하였다. 최종적으로 얻은 하중저항계수를 이용하여 방파제를 재설계한 후 목표수준을 만족하는지 검증하였다. 목표신뢰도수준의 변화에 따른 하중저항계수를 제시하여 한계상태설계가 용이하도록 하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제26권6호
• /
• pp.212-221
• /
• 2022

이 연구에서는 국내 도로교량 평가에서도 설계와 일관성이 있도록 한계상태설계법에 상응하는 평가방법을 마련하고, 선진국과 같이 평가에서 목표신뢰도지수를 감소시키는 경우 신뢰도분석을 통하여 보정하여 평가 활하중계수를 제안한다. 국내 대표 교량형식을 대상으로 수집한 실교량 자료를 활용하여 각 설계기준 별 설계활하중에 대한 하중효과를 산정하여 비교한다. 현행 설계법에 의해 산정된 하중효과를 바탕으로 최소요구강도를 산정하여 이에 대한 신뢰도분석을 통해 활하중계수 보정을 수행한다. 설계수준에 비하여 낮춰진 평가수준의 활하중계수를 교량 안전성평가를 수행하고, 이전 설계법의 안전성평가 결과와 비교하여 평가결과가 증가함을 확인하였다.

• 한국안전학회지
• /
• 제25권6호
• /
• pp.70-74
• /
• 2010

For each strand of wirerope sling, the international standards, ISO-8794, EN-13414 specify that the splice shall have five series of load carrying tucks. At least three of the load carrying tucks shall be made with the whole strand. And, the breaking force of the splice shall not be less than 70% or 80% of that of rope. But, There are no prescriptions for splicing types against different efficiency of each splicing type being used many workplace. In this study, analysis the work limit load efficiency according to variation of number of tucks and splicing types by experimental method As a result, the number of tucks 3+2 had the highest breaking efficiency.