• Journal of Korean Society of Water and Wastewater
• /
• v.9 no.2
• /
• pp.84-96
• /
• 1995

The dewatering characteristics of the sewage sludge was investigated through the experimental observations and model simulations. The activated sludge and the anaerobically digested sludge were examined for the dewaterability evaluation within the pressure range of $0{\sim}10^6N/m^2$. Modified Buchner funnel test and compression test by the consolidometer were conducted to evaluate average specific resistance, porosity, and moisture percentage of filter cake. Shirato's technique of compression-permeability test was followed for the pressure range lower than about $10^2N/m^2$. The flocculation effects on sludge dewatering was also examined for ferric chloride and polymeric flocculant. The application of hydrated lime which can be used for flue-gas desulfurization showed improved moisture percentage, and was thought to have positive feasibility in combined system of sludge dewatering and incineration. Determined characteristic constants were applied to Tiller's cake filtration model to simulate liquid pressure distribution and porosity distribution in cake. Model simulations showed a sharp drop of the porosity close to the cake-medium interface for the highly compressible material such as the activated sludge and the anaerobically digested sludge.

• Journal of Environmental Health Sciences
• /
• v.29 no.1
• /
• pp.34-42
• /
• 2003

The objective of this study is to investigate the waste recycling possibility, practicability, economic efficiency and acid gas sorbent use of the hard-shelled mussel. This study is to investigate the hydration/calcination reaction and fixed bed reactor. The physical-chemical characteristics of the hard-shelled mussel were analyzed by ICP SEM-EDX, BET and pore volume. Thus, the results could be summarized as follows; Hard-shelled mussel can be used as iron-manufacture and chemical sorbents considering more than 53.7% of the mussel is lime content. The SO$_2$removal efficiency of the hard-shelled mussel after calcined hydration increased thirty times as a result of the higher pore size, specific surface area and pore volume. Also, the CaO content, pore volume, pore size distribution and specific surface area greatly influenced the SO$_2$ and NOx removal reactivity. The optimum particle diameter average of hard-shelled mussel was $\pm$100 mesh, which was applied to the sorbent on the medium/small scale waste incinerator and flue gas desulfurization processes.

• Korean Journal Plant Pathology
• /
• v.11 no.3
• /
• pp.210-216
• /
• 1995

Alternaria spp.were predominantly isolated from the abnormal leaf spot lesions of pear cultivars Niitaka and Nijiiseiki. Alternaria isolates from the cultivar Niitaka were not pathogenic to both cultivars, but the isolates from the cultivar Nijiiseiki developed typical lesions of black leaf spots and were identified as A. kikuchiana. However, no typical abnormal leaf spot lesions were produced by the Alternaria isolates. Foliar spray of twelve different agrochemicals including lime sulfur, either alone or in combinations, with 7 times applications from April to July failed to reduced the disease development. Application of 17 different pesticides including fungicides, insecticides and herbicides currently used in pear orchards did not cause leaf injury similar to the abnormal leaf spot. Simulated acid rain of as low as pH 3.0 did not incite any leaf lesions alike the abnormal spot lesions. Mineral contents in the leaves of both cultivars did not differ significantly between the healthy leaves and those with abnormal leaf spots. When cuttings of pear tree were obtained in February from newly emerged twigs of the healthy or the diseased trees of Niitaka and planted in sand in the greenhouse, only those from the diseased trees developed typical leaf lesions of the abnormal spot. These results indicate that abnormal leaf spots are caused by unknown systemic agents in pear trees, rather than by Alternaria spp., chemical injury or acid rain.

• Laser Solutions
• /
• v.16 no.1
• /
• pp.5-9
• /
• 2013

We have successfully formed filament inside of a transparent soda-lime glass using a Ti:sapphire based femtosecond laser. To make filament form, keeping the laser intensity higher than critical intensity is essential. Also each of the machining parameters plays an important role for the formation of filament. In this paper, we study what parameter can possibly influence for formation of filament, and we introduce an application using filamentation by femtosecond laser for transparent material.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.10
• /
• pp.48-57
• /
• 2008

MR Fluid, one of functional fluids, is developed for the application to automobile products. MR CDC damper using MR fluid has following principles. When ar electric current is applied to the solenoid, apparent viscosity of MR fluid passing through the annular gap which acts as magnetic circuits varies directly as the intensity of the current. These devices have a simple structure and excellent lime response characteristics, emerging as the alternatives of the conventional semi-active suspension systems. In this study, a design procedure of the magnetic circuit through the solenoid fore and the flux ring functioning as a magnetic path is investigated so as to optimize the design and performance of MR CDC dampers for the vehicles. In addition, an operating point on the B-H curve, the magnetization according to the variation in the annular gap, the pole piece width and the density of MR fluid are studied to design the optimal piston head within the restrained dimension range.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.11
• /
• pp.740-744
• /
• 2017

Herein we studied the electrical and optical properties of indium tin oxide ITO/Ag/ITO multilayer thin films for application in transparent conducting electrodes. The ITO and Ag thin films were deposited onto soda lime glass (SLG) using radiofrequency and DC-sputtering methods, respectively. The as-synthesized ITO/Ag/ITO multilayer thin films were analyzed using 4-point probe, UV-Visible spectroscopy, and Hall measurement. We observed a rapid increase in electron concentration with increasing Ag thickness. However, electron mobility decreased with increasing Ag thickness. Finally, ITO/Ag/ITO multilayer thin films showed a characteristic low sheet resistance of $18{\Omega}/sq$ and high optical transmittance value (80%) with variation of Ag thickness (5~10 nm).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.857-860
• /
• 2002

The material that is both conductive in electricity and transparent to the visible-ray is called transparent conducting thin film. It has many field of application such as solar cell, liquid crystal display, transparent electrical heater, selective optical filter, and a optical electric device. In this study, indium tin oxide (ITO ; Sn-doped $In_2O_3$) thin films were deposited on $SiO_2$/soda-lime glass plates by a dc magnetron sputtering technique. The crystallinity and electrical properties of the films were investigated by X-ray diffraction(XRD), atomic force microscopy (AFM) scanning and 4-point probe. The optical transmittance of ITO films in the range of 300-1000nm were measured with a spectrophotometer. As a result, we obtained polycrystalline structured ITO films with (222), (400), and (440) peak. Transmittance of all the films were higher than 90% in the visible range.

• Korean Journal of Soil Science and Fertilizer
• /
• v.48 no.2
• /
• pp.146-152
• /
• 2015

Heavy metal pollution has been a critical problem in agricultural field near at the abandoned metal mines and chemical amendments are applied for remediation purpose. However, biological activity can be changed depending on chemical amendments affecting crop productivity. Main purpose of this research was to evaluate biological parameters after applying chemical amendments in heavy metal polluted agricultural field. Result showed that soil respiration (SR) and microbial biomass carbon (MBC) were changed after chemical amendments were applied. Among three different amendments, lime stone (LS), steel slag (SS), and acid mine drainage sludge(AMDS), AMDS had an effect to increase SR in paddy soil. Comparing to control ($93.98-170.33mg\;kg^{-1}day^{-1}$), average of 30% increased SR was observed. In terms of MBC, SS had an increased effect in paddy soil. However, no significant difference of SR and MBC was observed in upland soil after chemical amendment application. Overall, SR can be used as an indicator of heavy metal remediation in paddy soil.

• Journal of the Korean Society of Tobacco Science
• /
• v.11 no.1
• /
• pp.3-9
• /
• 1989

Field experiment was conducted to find out the cause of calcium deficiency of burley tobacco (Nicotiana tabacum L.), Liming materials and application rate were CaSO4 : Ca 35kg/10a, CaCO3 : 35kg/10a and agricultural lime : Ca 142kg/10a. The breakdown in tissues at tips and margins of upper leaves was developed at maximum growth stage. If complete breakdown and death does not occur and growth takes place later, giving the leaf a scalloped appearance. Upper leaves contained lower calcium content than other leaves. The stem and midvein of calcium deficient plants contained lower calcium and calcium minus oxalic acid, but higher oxalic acid contents than those of normal plant. Fresh leaves of limed plot contained higher calcium and oxalic acid, but not significant increment of calcium minus oxalic acid than those of unlimed plot. Since calcium oxalate is insoluble, it could precipitate within the culls if the calcium and oxalic acid are accessible to each other. It suggest that high level of oxalic acid in stem and midvein could be interfering with translocation of calcium to upper leaves.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.2
• /
• pp.296-305
• /
• 2017

Gallnuts are known to exert various pharmaceutical properties that include anti-inflammatory, antimicrobial, antioxidant, and detoxifying effects. Gallnut extract is thought to be a particularly safe antimicrobial agent for textile application due to its natural origins. Hence, textiles were dyed with gallnut to develop multi-functional clothing material with no harmful effects. In this study, three kinds of cool touch woven fabrics, each comprised of 100% viscose rayon filament, viscose rayon filament/high absorption & quick dry (polyester) filament, and viscose rayon $filament/tencel^{(R)}$ spun yarn, were prepared and used as substrates for gallnut dyeing to especially develop functional cool touch textiles for summer clothing material. On the other hand, gallnut dyeing was conducted with mordanting with iron, lime or alum, which induced different colors on the dyed textiles. Dyed textiles were then investigated by SEM, FTIR, antibacterial test, and antioxidant test. Subsequently, gallnut dyed textiles indicated excellent antibacterial ability and deodorization activity regardless of mordant species. However, only gallnut dyed textiles mordanted with iron and alum showed significant antioxidant ability. In addition, the dyeing processes impair the cool touch feeling of the textiles by changing the micro structure of the textile surface.