• Korean Institute of Interior Design Journal
• /
• v.24 no.5
• /
• pp.108-116
• /
• 2015

This study intends to research the spatial characteristics of Asian interim housing that accommodates sufferers pro tempore after disasters. The scope of this research covers the interim spaces used for housing people after natural disasters that occurred in Asia for the past fifteen years. Within this scope, literature review was conducted as the basis to derive the characteristics and environmental elements of interim housing, which provided the criteria to compare and evaluate cases of interim housing along with characteristic elements required of interim housing found in previous studies. According to literature review, interim housing can be classified by life-span, region, economy, climate, type, number of household, square measure, residential cost, structure/material, and service life. Within the scope of the present research, literature review showed a total of twenty-eight cases of interim housing in fifteen countries revealing a high rate of disaster occurrence in the subtropic and tropic climate of Southeast Asia. A great percentage of interim housing was used for long-term stay of over a year. The structure of interim housing varied from lightweight steel, wooden, masonry, membrane, to traditional structure and the type were divided into temporary shelter, transitional housing, temporary housing, and permanent housing. Followed by literature review, the characteristics required of post-disaster interim housing were analyzed based on previous research and case studies. The characteristics of interim housing can be divided into environmental, technological, and socio-cultural ones. Sub-characterical items according to such division include amenity, health, surroundings, structure, convenience, eco-friendliness, safety, communication, and locality. As a result of evaluation, most items met the required characteristics of interim housing, while technological characteristics such as structure and convenience varied with the types of interim housing and appeared even unnecessary in some cases. According to analysis, amenity is maintained through the structural and material characteristics of interim housing and is also facilitated by increasing number of infrastructure such as educational, sanitary, and convenience facilities provided by the governmental and organizational bodies. It is expected that this study will be utilized as preliminary data for follow-up studies that improve the environment of post-disaster interim housing suitable for domestic circumstances in environmental, technological, and socio-cultural respects.

• Composites Research
• /
• v.32 no.5
• /
• pp.284-289
• /
• 2019

In the present paper, the dynamic force-moment equilibrium equations, driving power and energy equations are analyzed to formulate the equation for fuel economy(km/liter) equivalent to the driving distance (km) divided by the fuel volume (liter) of the vehicle, a selected model of gasoline powered KIA K3 (1.6v). In addition, the effects of the dynamic parameters such as speed of vehicle (V), vehicle total weight(M), rolling resistance ($C_r$) between tires and road surface, inclined angle of road (${\theta}$), as well as the aerodynamic parameters such as drag coefficient ($C_d$) of vehicle, air density(${\rho}$), cross-sectional area (A) of vehicle, wind speed ($V_w$) have been analyzed. And the possibility of alternative materials such as lightweight metal alloys, fiber reinforced plastic composite materials to replace the conventional steel and casting iron materials and to reduce the weight of the vehicle has been investigated by Ashby's material index method. Through studies, the following results were obtained. The most influencing parameters on the fuel economy at high speed zone (100 km/h) were V, the aerodynamic parameters such as $C_d$, A, ${\rho}$, and $C_r$ and M. While at low speed zone (60 km/h), they are, in magnitude order, dynamic parameters such as V, M, $C_r$ and aerodynamic ones such as $C_d$, A, and ${\rho}$, respectively.

• Composites Research
• /
• v.31 no.6
• /
• pp.323-331
• /
• 2018

The effect of stainless steel jagged-pin reinforcement on the pull-off strength of the composite hat-joint was studied by the test. The pins were physically and chemically surface-treated and inserted in the thickness direction over the interface where the skin and stiffener meet. The specimens including the jagged-pins were made by co-curing process. Diameters of the jagged-pins were 0.3, 0.5 and 0.7 mm. The pin areal densities were set to 0.5 and 2.0% based on the interface area where the skin and stiffener meet. The specimens using 0.3 mm diameter normal (un-jagged) pins with 2.0% areal density were additionally fabricated and tested to investigate the pin shape effect on the pull-off strength. The pull-off strengths of specimens reinforced with 0.5% areal density by 0.3, 0.5, and 0.7 mm diameter pins were 45, 19 and 9% higher than those of un-reinforced specimens, respectively. In case with 2.0% pin areal density, the strengths were 127, 45, and 11% higher than those of un-reinforced specimens, respectively. The test results show that the higher pin areal density results in the higher strength when the pin diameter is the same. When the pin areal density is the same, the smaller pin diameter leads to higher strength. When the joints using jagged-pins and normal pins in 2.0% areal density with 0.3 mm diameter, the joints of jagged-pins showed the 64% higher strength. From the results of this study, it was confirmed that jagged-pin reinforcement can be an effective method for improving the pull-off strength of composite hat-joint.

• Composites Research
• /
• v.33 no.6
• /
• pp.360-364
• /
• 2020

Although research and development of existing steel-made Cowl Cross Member(CCM) was carried out with magnesium and plastic to make vehicles lighter, it is difficult to apply them to performance problems in the vehicle's mounting condition. Recently, the company is conducting research on the injection CCM of the composite insert as a lightweight component that is most suitable for mass-production of automotive parts. This is a manufacturing process that inserts composite injection bracket parts into aluminum bar, and the adhesion of the two parts is one of the important factors considering the vehicle's mounting conditions. In this study, the joint strength of Aluminum bar is one of the important factors as a study for the injection of aluminum bar into PA6-GF60 composite material. For the analysis of these research, the method of spraying adhesive to the aluminum bar and the case of knurling treatment have been analyzed and the bonding strength of the direction of rotation and lateral direction has been analyzed for each part between the aluminum bar of the cowl cross member and the shape of the injection component of composite materials.