• Journal of Energy Engineering
• /
• v.27 no.4
• /
• pp.13-19
• /
• 2018

In this study, the lightweight design of butterfly valve disc component for power plant based on topology optimization was performed. Here, commercial finite element (FE) analysis software was used. The external shape of the basic disc model was not deformed, and the internal element density was removed to make it lightweight. Optimal design was performed each other after the disc plate and two brackets attached on the surface of the disc were separated. Once the optimal shapes were selected, they were assembled to build up the 3-D lightweight valve disc model. After applying pressure to this model, FE analysis was performed to confirm the structural safety.

• Journal of Energy Engineering
• /
• v.29 no.3
• /
• pp.25-33
• /
• 2020

In this study, flow and structural computational analysis were performed to investigate the structural safety of the lightweight butterfly valve disc designed by topology optimization. After flow analysis, as the opening angle increased, the flow coefficient increased non-linearly and showed a gentle slop. When the opening angle was 12 degree, the cavitation could be predicted. After FE analysis, all FE von-Misses stresses of the lightweight disc were smaller than the yield strength of the material, and all FE maximum deformations were also smaller than the conservative deformation of the previous study. Ultimately, it was confirmed that the structural safety of the lightweight valve disc based on computational analysis is effective.

• Journal of the Korean Ceramic Society
• /
• v.44 no.10
• /
• pp.568-573
• /
• 2007

For the manufacturing lightweight fine aggregate, clay and waste material was formed by pelletizer. The fine aggregate of 1-5 mm diameter was formed by diameter 76 cm pelletizer disc. Pelletization variables were : (1) pelletizer disc angle, (2) speed of revolution of pelletizer, (3) added pelletization time. Green and sintered aggregate were measured specific gravity, absorption rate and average size. The optimum condition were found that the pelletization variables were angle at $70^{\circ}$, speed of revolution of pelletizer at 23.2 rpm, and water/solid ratio at 1/5. At these conditions, it was formed that fine aggregate green whose average size was $2.0{\sim}3.35mm$. Specific gravity and average size are increased with low angle of disc and fast revolution speed of disc. Specific gravity and average size were not distinctly influenced by added pelletization time. Sintered aggregate was distinctly influenced by properties of green.

• Journal of Auto-vehicle Safety Association
• /
• v.13 no.3
• /
• pp.32-40
• /
• 2021

Composite material is very attractive because it has excellent mechanical property and is possible to lightweight due to the low density. However, composite material is less used compared to other systems in the chassis system because it is very hard to solve NVH problem when composite material is applied to vehicle. Especially, reducing squeal noise of composite brake system is essential to apply it to vehicle successfully. In this paper, we present a new solution to reduce squeal noise of composite brake system. To achieve this goal, we analyze main causes of noise using RCA (Root Cause Analysis), CA (Contradiction Analysis) and sequentially get IFR (Ideal Final Result) to solve the problem. Next, we define the function of composite brake system and derive control factors and noise factors. A variety of tests for factors like chamfer, slot, damping shim, underlayer of brake pad are done. In addition, we analyze level of contribution for control factors theoretically. Finally, we get the effective solution for reducing squeal noise.