• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.3
• /
• pp.59-64
• /
• 2004

With the proliferation of nonlinear loads such as lighting facilities in all modern society high neutral harmonic currents have been observed. High neutral currents in three- phase four-wire distribution systems can cause lots of harmonic problems. The most common solution of neutral harmonic currents reduction is a zero phase sequence filter using zig-zag transformer. This paper analyzes a commercially available neutral line zero sequence currents reduction device and applies the equipment to lighting loads for eliminating harmonics. Experimental results are compared numerically and graphically with simulation results through the use of MATLAB.

• Journal of Sensor Science and Technology
• /
• v.32 no.2
• /
• pp.124-130
• /
• 2023

Implementing flexible production systems in domestic and foreign automotive design parts assembly has increased demand for automation and power reduction. Consequently, transition to a hybrid production method is observed where multiple vehicles are assembled in a single assembly line. Multiple robots, 3D vision sensors, mounting positions, and correction software have complex configurations in the automotive glass mounting system. Hence, automation is required owing to significant difficulty in the assembly process of automobile parts. This study presents a primer lighting and inspection algorithm that is robust to the assembly environment of real automotive design parts using high power 'ㄷ'-shaped LED inclined lighting. Furthermore, a 2D camera was developed in the primer coating inspection system-the core technology of the glass mounting system. A primer application demo line applicable to the actual automobile production line was established using the proposed high power lighting and algorithm. Furthermore, application inspection performance was verified using this demo system. Experimental results verified that the performance of the proposed system exceeded the level required to satisfy the automobile requirements.

• Korean Journal of Human Ecology
• /
• v.19 no.1
• /
• pp.215-225
• /
• 2010

This study had the purpose of presenting a residential environment solution as a desirable educational environment for middle school students to grow soundly and to achieve proper self-realization while providing basic materials to build up a suitable residential environment by comparing and analyzing what relationships exist between different home backgrounds, residential environments and middle school students' social maturity. This research was conducted from Feb. 11, 2008 to Feb. 13, 2008. The subject of this research was 601 students in 3 middle schools located in Gyunggi-do. The data analyzed used the SPSS 11.5 version. The summary of this study's results is as follows. First, in terms of home background, the higher the parents' educational background and social and economic position, the greater the students' social maturity. Second, in terms of home environment, the more spacious the living space, the better the water and sewage system and rest room, the more convenient the air conditioner and kitchen system, the better the lighting, ventilation, soundproofness, insulation, the less the danger in relation to fire, crime, traffic accidents, disaster, the greater the students' social maturity. Third, in terms of the home environment related to the correlation between the residential environment and social maturity, all areas such as housing facilities, housing structural environment and housing safety showed static correlations and proved that the residential environment has an important influence on social maturity. Accordingly, in order to build up an ideal residential environment, we should make efforts to expand and improve better facilities at home considering privacy, lighting, ventilation, soundproofness, heating etc. and remove unsound factors that obstruct students social maturity and build up clean and safe residential environment with good relations with their neighbors.

• Journal of the Health Care and Life Science
• /
• v.8 no.2
• /
• pp.121-125
• /
• 2020

People counting has always been a method of interest for maximizing energy saving by identifying the congestion level or amount of use of a specific facility to efficiently manage the facility, or automatically implementing a power saving function by identifying the number of people entering and exiting a specific place such as a toilet. The method of counting people by image processing is very expensive and has the disadvantage of being severely affected by the surrounding environment of the lighting. In the case of the area sensor, there is a disadvantage of counting as one person when the number of people passes close with arms folded. In order to solve the existing method, which is expensive, affected by lighting, or inaccurate the number of people in certain cases, this paper proposes a new method of counting people using the principle of LiADAR. Accurate counting of the number of people entering the hospital will help manage hospital facilities, but it will also help to establish effective quarantine measures at the present time when Corona 19 is prevalent.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2004.11a
• /
• pp.169-174
• /
• 2004

As quality of life improves, apartment's residents prefer residing type that have differentiation of resident center. Accordingly, community facilities such as fitness club, swimming pool, and so on are operated in apartment complex. Community areas are important space that can induce inhabitantses' natural meeting and contact, and that can solve social problems which is started each individuals' estrangement in current through community formation between neighborhood. From this point of view, this paper investigated the essence of light and the luminous environment for community areas. This paper finally suggested well-coordinated lighting plan of community areas, derived from the measurement and analysis of luminous environment in these cases.

• Proceedings of the KIEE Conference
• /
• 2007.10c
• /
• pp.157-159
• /
• 2007

For a vessel to safely navigate on the ocean, it is required to check the vessel position as frequently as possible. When a vessel navigates oil the ocean or entering/leaving a port, the target area such as islands, points and mountain peak, etc. are used. However, when such target are not available or when vessel navigates in night time, installed artificial navigation aid facilities help successful vessel navigation. Light Wave Aid helps to confirm a position to the navigator directly and quickly. So, the synchronous light to display the accurate signal has wide applications. However, lantern domestic industry is small, and most of the products show non-compatibility. Consequently, this paper presents the synchronous lighting using UTC of GPS, which maintains compatibility with different lanterns. Also, by replacing conventional electric bulb with LED lamp, simple and efficient lighting system is obtained.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2008.05a
• /
• pp.93-96
• /
• 2008

The childhood reading and physical environments are an important factor for shaping personality and values established. Therefore, We have to provide a quality environment for correct reading habits to children. the purpose of this study is to provide a basic interior data through the analysis of case study. for this purpose this study has analyzed of 5 children's reading room of public libraries built in Seoul since 2000. especially the research which it analyzed these reading room of forms of space, furniture, color, finish material, lighting. the results of this study are follows : Chairs and desks were not considered of children's scale or uniformly made. compositions of convenient facilities has insufficient component. finish material and lighting plan is similar to adults reading room plan. To give correct reading habits and interest to children, considered space design is necessary.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.3
• /
• pp.95-99
• /
• 2013

The maximum power analysis simulator took advantage of the facilities and power consumption reduction simulator test scenario development and testing of improvement in the scenario. As a maximum demand power controller, Maximum power analysis simulator performs control and disperasion of maximum demand power by calculating base power, load forecast, and present power which are based on signal of watt-hour meter to keep the electricity under the target. In addition, various algorithms to select appropriate control methode on each of the light installations through the peak demand power is configured to management. The simulation shows the success of control power for the specified target controlled by five sequential lighting installations.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.46 no.4
• /
• pp.466-475
• /
• 2010

This study intends to present a direction for the better reforming of fishers'onboard living conditions and proposals for preparing for ratification of the Work in Fishing Convention by means of making a comparison between standards on recent national fishing vessel accommodation facilities and standards on the Work in Fishing Convention and Its Recommendation, 2007, ILO. For the most part of standards on national fishing vessel accommodation facilities are somewhat insufficient to satisfy the provisions in Annex III of the Convention. Considering by items on fishing vessel accommodation facilities, the standards on insect protector, noise and vibration, heating and air conditioning, lighting, persons per sleeping room, recreational facility are not provided in national law. Headroom, separation of accommodation, sleeping room floor area, mattress size, mess room, galley and food storage are partially sufficient for the Convention. In case of sanitary facilities, national standards are not sufficient for the Convention. The other side, facilities related safety of ship and crew such as emergency escape etc., are fully sufficient for the Convention. These insufficiencies caused by different types of fishing vessel depend on originality of fishing method and practices. In the comparison between equivalent tonnage about vessel's length on convention and calculated tonnage of national existing fishing vessel, the difference are 226tons about length 24m and 501tons about length 45m. For that reason, headroom, persons per sleeping room, cabin of sicker and injured, sanitary facilities may decide to use gross tonnage in place of length (L) and the alleviating measure basis of convention. But in case of standards on sanitary facilities which are unsufficient for the Convention, specially in coastal fishing vessel length basis should be adopted with alleviating basis for less than length 24m.

• Korean Journal of Human Ecology
• /
• v.10 no.1
• /
• pp.59-70
• /
• 2007

This study was conducted to investigate the perception about situation about school foodservice facilities and utilities in Chonbuk area. Self administered questionnaires were collected from 222 dietitians. Statistical data analysis was completed using a SPSS v. 10.0 program. The results are summarized as follows: Among 222 school foodservice systems, 68.5% of schools prepared the meal with conventional way and 31.5% of with commissary way. As the results of condition of school foodservice facilities, there was significantly differences between conventional and commissary foodservice systems; wall and ceilings(p<0.05), lighting(p<0.05), kitchen ventilation(p<0.05), preparation facilities(p<0.01), washstands(p<0.05), dressing rooms for employees(p<0.001), rest, and showers(p<0.01). On the basis those result it was assumed that the status of facilities of conventional foodservice systems better than commissary ones. About 66% of conventional foodservice systems and 34.5% of commissary ones have conducted own dining rooms. As to situation of dining rooms, conventional foodservice systems had better facilities than commissary ones. Therefore, governmental regulation agencies have to review and approval of plans prior to new construction or extensive remodeling of school foodservice facilities. In addition, content analysis was conducted regarding to dietitian's opinions on foodservice facilities and utilities.