• 제목/요약/키워드: Lighting Emitting Diode

검색결과 201건 처리시간 0.032초

Thermal Characteristics: Gap of LED Devices and LED's Lighting Application

  • Liu, Muqing;Zhang, Wanlu;Zhu, Xiaojing
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2008년도 International Meeting on Information Display
    • /
    • pp.1347-1348
    • /
    • 2008
  • The efficacy and its degradation of light emitting diode(LED) are related to its PN junction's temperature(Tj). Currently efficacy in certain temperature and thermo-resistant are defined for the depending. However, the definitions are quite inconvenient for lighting application. The paper focuses on the issue and presents a method to evaluate the thermal characteristics of LED efficay.

  • PDF

Study on Simulation Design of Light Emitting Diode Luminaires for 100 W Safety Street Lighting

  • Shin, Ik-Tae;Lee, Se-Il;Yang, Jong-Kyoung;Park, Dae-Hee;Lee, Dong-Jin
    • Transactions on Electrical and Electronic Materials
    • /
    • 제11권3호
    • /
    • pp.138-144
    • /
    • 2010
  • Optical analysis is necessary to optimize light emitting diode (LED) safety street lighting. In this study, optical analysis was conducted for 100 W LED safety street lighting. Experimental research on such a single LED was the first undertaken. Simulation modeling based on the optical properties of the single LED has compared between average road illuminances and has them analyzed with Korean Industrial Standards for LED safety street lighting (KS C7658:2009). The simulation results demonstrated that the illumination performance (average road illuminance) was 75.3 lx at a height of 4 m and an area of $32\;m^2$, 45.25 lx at a height of 5 m and an area of $72\;m^2$, and 30.05 lx at a height of 6 m and an area of $128\;m^2$. 100 W safety street lighting (model CE180-ST-OS) designed by simulation was also compared between product and 100 W simulation modeling, and error rates averaged 5.6%. The 100 W LED safety street lighting base designed in simulation modeling was proven by comparison experiments. Through the simulations and the corresponding analysis, it was found that the tested 100 W LED safety street lamp had reasonable performance. The design method for LED safety street lamps has been summarized based on the optical analysis.

LED IT 기반 시스템 센서 네트워크 송수신 모듈 연구 (LED IT-based System sensor network transceiver module research)

  • 장태수;이준명;최정원;김용갑
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2012년도 추계학술대회
    • /
    • pp.11-12
    • /
    • 2012
  • 본 논문에서는 LED(Light Emitting Diode)조명을 통해 기존 사용되는 적외선 센서로 가시광통신의 기술이 효율적으로 송 수신 가능한지 성능 분석을 하기 위한 연구이다. LED는 전기를 빛으로 바꾸는 성질을 이용하여 조명으로 활용한다. LED 조명 통신 융합 원리는 LED와 PD(Photo Diode)의 깜박임 송수신을 기본 원리로 하여 조명 기능을 유지하면서 통신에서 동시에 실현하게 가능하게 한다. LED의 기본 구조 하에 여러 IT 응용기술이 발전하게 되었고, 현재 실생활에 접하게 되었다. LED조명이 있는 곳이라면 어디서나 무선 통신을 할 수 있는 기술을 하고자, 널리 이용되고 있는 PD인 적외선 센서를 활용하여 시스템의 H/W의 초기 값을 ~1m 이상으로 하고 전체 시스템 속도 향상 시킬 수 있는 가시광 데이터 전송 시스템을 이루었다. 사용된 LED모듈이 통신에 가능한지 성능 분석을 하고, 구현된 연구의 LED 및 적외선 센서를 구성하여 예측 및 통신 거리에 대해 나타내고 응용방법과 가능성에 대해 연구하고자 한다.

  • PDF

유기발광다이오드 조명용 유기발광체의 최근 동향 (Recent Progress on Organic Emitters for Organic Light Emitting Diode Lightings)

  • 정효철;이하윤;강석우;안병관;육경수;박영일;김범진;박종욱
    • 공업화학
    • /
    • 제27권5호
    • /
    • pp.455-466
    • /
    • 2016
  • 유기 발광 다이오드(OLED)는 학문 및 산업분야에서 많은 관심을 받고 있다. OLED는 이미 휴대폰과 TV분야에서 상업화에 성공하고 있으며, 조명분야에서는 기존에 사용되어왔던 백열등, 형광등과는 다르게 면발광, 대면적, 초경량, 초박형, 유연성의 특징은 물론 낮은 에너지 사용 등의 차별성을 가지고 있기 때문에 최근 많은 관심을 받고 있다. 본 논문에서는 white organic light-emitting diode (WOLED)에 적용되는 대표적인 형광 및 인광 발광 재료들을 소개한다. 이렇게 선행 연구된 물질들을 이해하고 체계적으로 분류하는 것은 앞으로 새로운 발광 재료를 연구, 개발하는데 큰 도움을 줄 수 있을 것으로 기대된다.

형광등 대체용 LED조명과 CNT조명에 대한 전기적.광학적특성의 비교고찰 (The Characteristics Analysis of substitute LED and CNT Lighting for fluorescent lamp)

  • 황명근;임종민;신상욱;노재엽;조미령;이세현;전상규;최석준;이진우
    • 한국조명전기설비학회:학술대회논문집
    • /
    • 한국조명전기설비학회 2008년도 춘계학술대회 논문집
    • /
    • pp.205-208
    • /
    • 2008
  • 본 논문에서는 LED(light emitting diode)조명과 CNT(carbon nano-tube)조명에 대한 전기적인 특성과 광학적 특성을 측정하여 비교하고 고찰하였다. 특히 IES format 파일을 사용하여 각각의 조명등기구에 대한 LID(luminous intensity distribution) 분석과 조도 시뮬레이션을 수행하여 최대 및 최소, 그리고 평균조도 등을 분석하였다. 향후 LED 및 CNT 신광원은 면조명으로의 관련 기술기준 및 규격의 작성시 참고자료로 활용될 것으로 판단된다.

  • PDF

Modeling and Optical Characteristics of LED-Lighting Adopting Aspherical Lens

  • Lee, Hak-Suk;Park, Jong-Rak;Kim, Min-Jae;Kim, Hye-Jung;Kim, Jung-Ho
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2009년도 추계학술대회 논문집
    • /
    • pp.19-19
    • /
    • 2009
  • Recently, Light Emitting Diode(LED) has many advantages in comparison with conventional light sources; low power consumption, long lifetime, and less environmental pollution. Therefore, the use of LED is multiplying and increasing rapidly. In general, however, spherical lens is used in LED-lighting which cause many problems induces by optical aberration of spherical lens; low illumination, a yellow belt, unpleasant feeling in human eye. As a potential solution of this problem, aspherical lens can be employed. This study reports the improvement of LED-lighting performance by adopting aspherical lens. From the commercial program, $LightTools^{TM}$, the optical problem were ensured. And then, to improve this problem, optimum aspheric form was designed using Code $V^{TM}$.

  • PDF

비구면 광학계를 적용한 LED 조명의 광학성능 향상에 관한 연구(I) (A Study on Optical Efficiency Improvement of LED-lighting Adopting Aspherical Optical System(I))

  • 이학석;박종락;김민재;김혜정;김정호
    • 한국전기전자재료학회논문지
    • /
    • 제22권12호
    • /
    • pp.1033-1038
    • /
    • 2009
  • Recently, Light Emitting Diode (LED) has many advantages in comparison with conventional light sources; low power consumption, long lifetime, and less environmental pollution. Therefore, the use of LED is increasing rapidly. In general, however, spherical lens is used in LED-lighting which cause many problems induces by optical aberration of spherical lens; low illumination, yellow belt, unpleasant feeling in human eye. As a solution of these problem, aspherical lens can be employed. This study reported the improvement of LED-lighting performance by adopting aspherical lens. From the commercial program, $LightTools^{TM}$, the optical problem were ensured. And then, to improve these problem, optimum aspheric form was designed using Code $V^{TM}$.

PAN 기반의 LED 조명 제어 장치 개발 (The Development of LED Lighting Controller based on the PAN)

  • 엄우용
    • 전자공학회논문지
    • /
    • 제53권1호
    • /
    • pp.145-152
    • /
    • 2016
  • 전통적인 조명이 고효율 LED(Light Emitting Diode)로 빠르게 대체되고, 에너지 효율의 극대화를 위한 다양하고 효과적인 조명 제어 기술이 요구되고 있다. 본 논문에서는 LAN(Local Area Network)과 PAN(Personal Area Network) 기반의 유무선 통신기술을 이용하여 다양한 방법으로 LED 조명을 제어 할 수 있는 조명 제어 장치를 설계하고 구현한다. 구현된 장치는 조명 설치의 복잡한 배선 작업과 설치 작업 비용을 절감하고, 필요한 곳만 선택적으로 자동 또는 수동으로 조명을 제어할 수 있도록 제어 장치를 설계하여 전력 소비량을 최소화할 수 있다. 실험을 통해 개발된 LED 조명 제어 장치의 기능이 정상적으로 동작함을 확인하였다.

ITO-Ag NW기반 투명 양자점 발광 다이오드 (ITO-Ag NW based Transparent Quantum Dot Light Emitting Diode)

  • 강태욱;김효준;정용석;김종수
    • 한국재료학회지
    • /
    • 제30권8호
    • /
    • pp.421-425
    • /
    • 2020
  • A transparent quantum dot (QD)-based light-emitting diode (LED) with silver nanowire (Ag NW) and indium-tin oxide (ITO) hybrid electrode is demonstrated. The device consists of an Ag NW-ITO hybrid cathode (-), zinc oxide, poly (9-vinylcarbazole) (PVK), CdSe/CdZnS QD, tungsten trioxide, and ITO anode (+). The device shows pure green-color emission peaking at 548 nm, with a narrow spectral half width of 43 nm. Devices with hybrid cathodes show better performances, including higher luminance with higher current density, and lower threshold voltage of 5 V, compared with the reference device with a pure Ag NW cathode. It is worth noting that our transparent device with hybrid cathode exhibits a lifetime 9,300 seconds longer than that of a device with Ag NW cathode. This is the reason that the ITO overlayer can protect against oxidization of Ag NW, and the Ag NW underlayer can reduce the junction resistance and spread the current efficiently. The hybrid cathode for our transparent QD LED can applicable to other quantum structure-based optical devices.

White Light Emission with Quantum Dots: A Review

  • Kim, Nam Hun;Jeong, Jaehak;Chae, Heeyeop
    • Applied Science and Convergence Technology
    • /
    • 제25권1호
    • /
    • pp.1-6
    • /
    • 2016
  • Quantum dots (QDs) are considered as excellent color conversion and self-emitting materials for display and lighting applications. In this article, various technologies which can be used to realize white light emission with QDs are discussed. QDs have good color purity with a narrow emission spectrum and tunable optical properties with size control capabilities. For white light emission with a color-conversion approach, QDs are combined with blue-emitting inorganic and organic light-emitting diodes (LED) to generate white emission with high energy conversion efficiency and a high color rendering index for various display and lighting applications. Various device structures for self-emitting white QD light-emitting diodes (QD-LED) are also reviewed. Various stacking and patterning technologies are discussed in relation to QD-LED devices.