• 소음진동
• /
• 제8권3호
• /
• pp.420-427
• /
• 1998

A strain modal testing method has been applied to a cantilever beam to investigate the characteristics of the method. By applying the method to an analytical and an experimental system, it was shown that accurate modal parameters can be estimated from strain frequency response functions using a current modal parameter extraction algorithm. The modal parameters estimated by the method are more accurate than those by the conventional method which uses accelerometers when the tested system is of light weight. The method can be used to predict strain responses and excitation forces for given excitation forces and responses, respectively. Cracks on a structure can be detected by measuring strian FRFs and comparing them with the original ones.

• Journal of Advanced Marine Engineering and Technology
• /
• 제24권6호
• /
• pp.155-163
• /
• 2000

A technology of full time four wheel drive(4WD) vehicle has been improved greatly, and the market share of full time 4WD has been extended steadily in recent days. The transfer case is an essential element in the 4WD automobile. In this paper, the details of electronically controlled transfer case is described. In order to achieve easy shifting, the shifting, the developed system automate the conversion of "$4\times2\longleftrightarrow4\times4(H)\longleftrightarrow4\times4(L)$". Furthmore, this system employs an chain drive type instead of gear drive type for drive type and synchromesh type instead of constant-mesh type for gear mesh type. Therefore, the developed transfer case is accomplished light-weight, low noise, and compact.d compact.

• 한국정보통신학회논문지
• /
• 제9권4호
• /
• pp.839-843
• /
• 2005

본 논문에서는 VHF 송수신기 셋트에 쉽게 장착할 수 있는 해상용 광대역 수신증폭기를 소형 경량, 저비용으로 제작하여 전반적인 수신기의 수신성능을 개선하고자 한다. 제작된 수신 증폭기는 140MHz $\~$ 170MHz 주파수 대역에서 3dBm 정도의 수신감도를 개선하는 특성을 나타내었다. 따라서 VHF대역을 이용하는 통신장비를 더욱 효율적으로 사용가능하며, 양질의 원거리통신이 가능하기 때문에 활용도가 매우 높을 것으로 사료된다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 추계학술대회 논문집
• /
• pp.263-266
• /
• 2003

The high power factor converters are classified step-up, step-up-down and step-down converter, The power conversion system must be increased switching frequency in order to achieve a small size, a light weight and a low noise. And the power system brings on a high efficiency and high power factor. When a switch of the step down converter is operated with a commercial frequency(60Hz), a reactor using the converter is gone with a great number of harmonics waveforms of low grade. As results of this, the converter is decreased input power factor and is increased system size. To improved these, this paper proposes a PSM(Pulse Size Modulation) control strategy operated with high power factor.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 B
• /
• pp.766-768
• /
• 1998

Optical Temperature Distribution measurement System (OTDS) is completely different from conventional electric point sensor in that it uses the optical fiber itself as the sensor. This new concept in temperature measuring system requires only one fiber to be laid. The use of optical fiber also gives the advantage of small diameter, light weight, explosion resistance, and electromagnetic noise resistance. The OTDS is a sensor which is capable of making a precise measurement over a wide range of areas using only a single optical fiber. Since current temperature sensors, such as the thermocouple, are only used to measure temperaturea of point, they are almost impractical for measuring a wider range because of the extremely high cost. In comparision with current sensors, the optical fiber distributed temperature sensor can make much quicker and more precise measurements at a comparatively low cost.

• 한국분무공학회지
• /
• 제7권2호
• /
• pp.31-36
• /
• 2002

According to the improvement of PC performance, it is expected that calorific value, which causes PC to malfunction, is increased. Therefore, the development of new cooling system is recently required. As the method to solve this problem, we applied loop heat pipe to PC cooling system. The advantage of the loop heat pipe is that it has a small size, light weight, simple shape, long life and it has a good performance on heat transfer, no-noise, wide range of applicable temperature and no supply of power from the outside. It is confirmed that loop heat pipe reduces thermal resistance and has a good performance on PC cooling.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.394-399
• /
• 2005

Embedded rail track can be described as a track structure that is completely covered within pavement. Rail supported continually on a concrete slab or concrete plinth. There are many kinds of types such as non-resilient track and resilient track, super resilient embedded track (floating slab). Embedded rail track is generally the standard for light rail transit routes because this track has many advantages such as reducing noise, maintenance cost and weight of track. In this paper, decision of track profile is restricted by the optimum levels of the flangeway and the gap between the rail head and the pavement surface of depressing tread zone. By result of this study, embedded rail track can reduce corrosion of rail, internal stress and rail deflection.

• 한국안전학회지
• /
• 제3권1호
• /
• pp.21-29
• /
• 1988

Conventional pwm switching power supply have the disadvantage some aspects of size, light weight, noise and system stability. High frequency Series Resonant Converter (SRC), described in this paper, almost improve above disadvantages. We use the state plane technique as analysis method. This technique is powerful tool which can clearly analyze the peak stress of the state variables inside the converter, Here, we can define each operation mode from frequency ratio Fsn, switching frequency to resonant frequency, and we analyze the output performance in each operation mode. To verify the theoretical analysis, we compose the actual converter, and the experimental results are compared with analysis.

• 조명전기설비학회논문지
• /
• 제12권4호
• /
• pp.90-99
• /
• 1998

DC/DC 컨버터의 리액티브 성분의 물리적 크기를 저감하고 동특성을 개선하기 위해서는 동작 스위칭 주파수 를 증가시키는 것이 바람직하다. 그러나 이것은 발열 및 스트레스로 인한 파워 소자의 파괴, 스위칭 손실 증가 로 인한 효율 감소 및 EM! 동의 문제가 발생한다. 따라서, 본 논문에서는 이러한 문제점을 해결하기 위해 보조 회로를 웅용한 소프트 스위칭 Forward-Flyback PWM DC/DC 컨버터를 제안하였다. 시뮬레이션 및 실험 결과로부터 제안한 컨버터의 타당성을 확인하였다.

• 소음진동
• /
• 제10권1호
• /
• pp.82-96
• /
• 2000

The purpose of this study is to figure out the relationship between the mini-laboratory and the reverberation room for the domestic floor structures which are practically constructed in apartment houses. For this purpose, seven specimen which were varied in structures and thicknesses were tested in Chonnam National University reverberation room and in the artificial mini-laboratory which is the $\farc{1}{3}$ scale model of the former. From the result of this study, it was proved that there is a good correlation between the mini-laboratory and the reverberation room for the apartment floor structures as well as floorcovering PVC. The result of this study could save the labor and the time, etc.