• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 춘계 학술논문 발표대회
• /
• pp.255-256
• /
• 2012

In this study, strain properties of high strength concrete using light weight aggregate which is widely used in recent years are evaluated. For these purpose, thermal strain, transient creep were measured in prestressed condition as 0, 20, 40% of specimen strength at target temperature with 60MPa specimens which was using normal and light weight aggregate. As a result, light weight aggregate is more advantageous for the control of strain than normal aggregate because of its low thermal expansion.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 봄 학술발표회 논문집
• /
• pp.155-161
• /
• 1997

This Expriment is performed to describe the properties of the freezing-thawing and to find the method to enhance the freezing-thawing resistance of the high strength light weight aggregates concrete. For this purpose, we made 8 kinds of specimen of concrete mold. The light weight coarse aggregate concrete which contained AE was appeared in good condition and its durability index was more than 90% by the buffer action which owing to entained air. The light weight aggregates concrete which admixture of silca fume, was appeared that the durability index was 46.74% in spite of its high strength. I might conclude that the most important factor for freezing-thawing resistance of high strength light weight aggregate concrete is the entrained air.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.457-460
• /
• 2004

This study examines the sound insulation of the light-weight wall using light-weight concrete and offers the basic datum for enhancing it. The sound insulation of the light-weight wall is determinated by the density, installation method, absorption materials, air layers etc. Among the factors, the solution of outlet that is the major cause of reducing sound insulation should be made. If absorption materials are installed in the cavity walls, it enhances to 15dB in 500Hz.

• 한국기계가공학회지
• /
• 제17권6호
• /
• pp.130-135
• /
• 2018

Currently the automobile market is developing eco-friendly vehicles in order to cope with fuel efficiency regulations. Many studies have been conducted to improve travel performance and fuel economy of the environment-friendly vehicles, and vehicle manufacturers study how to manufacture light-weight vehicles for improving fuel economy for both existing vehicles and environment-friendly vehicles. Exemplary light-weight vehicle technologies include optimal design of vehicle body structure which is a light-weight vehicle method by changing component shapes or layout to optimize the vehicle body structure and the new process technology for using new light-weight and very strong materials Various studies.

• 한국의류학회지
• /
• 제23권3호
• /
• pp.483-494
• /
• 1999

This study investigated the relation between seasonal variation of clothing weight and its resting metabolic rate to determine the relation between proper living temperature and cold/heat tolerance. Thirty six subjects(18 males and females twenties) were composed to obtain the clothing weight(Total clothing weight) and resting metabolic rate for a year and grouped four seasons : spring (Mar-May) Summer(Jun-Aug) Fall(Sep-Nov) and Winter(Dec-Feb). The data of males and females were respectively divided into three groups by cluster analysis with clothing weight. 1. The resting metabolic rate of male(41.1kcal/m2/hr) was higher than that of female(33.2kcal/m2/hr). It is suggested there is gender difference in the resting metabolic rate(p<.001) 2. The resting metabolic rate of male and female was the highest in Winter. It is suggested there is seasonal variation in the resting metabolic rate(p<.001) 3. It was found that there was relation between clothing weight and resting metabolic rate. The difference of resting metabolic rate between Summer and Winter which is profitable to adaptation to living temperature was significant in light clothing weight in male as well as in female. 4. In comfortable sensation most subjects responded that he/she felt 'comfortable' except Winter. However the heavy clothing weight group felt 'a little uncomfortable' throughout all seasons. l In thermal sensation most subjects responded that he/she felt 'neutral' And then the heavy clothing weight group responded warmer in summer and cooler in winter than light clothing weight group. From the results it was confirmed that male and female showed seasonal variations in clothing weight and resting metabolic rate. Also the resting metabolic rate of male and female was influenced by the clothing weight. In short seasonal variation of resting metabolic rate was larger in light clothing weight group than in heavy clothing weight group. Therefore light clothing weight group is advantgeous in living temperature to improve cold/heat tolerance and it also shows that living with the light clothing weight may enhance the degree of adaptation to change of living environment

• Journal of Advanced Marine Engineering and Technology
• /
• 제34권8호
• /
• pp.1180-1187
• /
• 2010

선박 내의 데이터 처리량이 증가하면서 Ethernet 기반 정보 통합 관리를 위한 표준인 IEC 61162-4 시리즈가 발표되었다. 하지만 기존의 표준은 요구하는 기능이 많고 복잡하여 구현이 어려운 문제가 있었기 때문에 보다 Light-Weight Ethernet 표준으로의 대체가 결정되었다. 따라서 이 논문에서는 기존의 표준과 대체될 표준의 시스템 구조 및 특징을 비교 분석하고 서비스 요구사항을 도출한다. 또한 도출된 내용을 바탕으로 적절한 서비스를 제안하며, 제안된 서비스를 위한 모듈의 설계 및 구현에 관한 내용을 다룬다.

• 한국해양공학회지
• /
• 제23권3호
• /
• pp.14-19
• /
• 2009

The present study developed a model to estimate the light weight of an ultra-large container ship. The weight estimation model utilized container ship data obtained from shipyards and the subdivided this weight data into appropriate weight groups. Parameters potentially affecting the group weight were selected and expanded based on experience for weight estimation, and a correlation analysis was performed by the SPSS program to determine the key parameters characterizing the group weight. A weight estimation model applying the multi-regression analysis was proposed to assess the weight of an ultra-large container ship at the preliminary design stage, and the results obtained by the suggested method showed good agreement with the shipyard data.

• 한국안전학회지
• /
• 제28권2호
• /
• pp.31-36
• /
• 2013

For lighting of dark and hazardous workplace such as compartment of ships under construction, workers should use hand lamps of explosion-proof type. However, the heavy weight of such lamps has prevented most impatient workers from using such types of lamps extensively. In this paper, we developed a light weight hand lamp of intrinsic safety type which reduced the weight a lot while maintaining or improving the lighting and explosion-proof function. We made a prototype which consisted of lamp fixture and high frequency power supply. Testing results show that the hand lamp meets well all the explosion-proof testing requirements of the Korea Occupational Safety and Health Agency. And more, we surveyed the explosion protection technology of a light weight hand lamp, and suggested the advantage/disadvantage to apply lighting of hand lamp about economical aspect.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 춘계 학술논문 발표대회
• /
• pp.8-9
• /
• 2019

Euro forms and aluminum forms, which are currently used in formwork construction sites are limited by their heavy weight and the use of environmentally hazardous form oils. Therefore, in this study, 'eco-friendly light weight form' was developed, which does not require form oils during the removal process of form. In addition, the superiority of the developed form was verified by comparison with Euro forms and aluminum forms in terms of noise generation and weight. Application of the eco-friendly light weight form in construction sites is expected to reduce the noise level, and increase workers' convenience. The productivity of formwork is also increased.

• EDISON SW 활용 경진대회 논문집
• /
• 제4회(2015년)
• /
• pp.541-542
• /
• 2015

Recently, a popularity of the smartphone is on the rise. And also related services are being created. The growth of the smart technology makes advanced equipment for smartphone accessories. Selfie-rod is one of them. Selfie-rod satisfies people who want to take their own picture at long distance. However, the weight of recent selfie-rods is too heavy that has nice functions. So, we have re-designed new selfie-rod that has light-weight body. First, we observed a selfie-rod and check the reason of the selfie-rod's high weight. The new selfie-rod has a shell and inside, there is a space that it can be light-weight. The shell and space make the selfie-rod lighter. In FreeCAD, we designed shell with a rotation function. Finally, we designed light-weight body selfie-rod with FreeCAD. FreeCAD can be used easily for beginners of CAD. FreeCAD is suitable 3D-design tool for era of 3D-printing.