• Development and Reproduction
• /
• v.20 no.2
• /
• pp.119-125
• /
• 2016

This study describes results on sexual maturation and characteristics of natural spawned eggs to develop a method for the production of stable, healthy fertilized eggs from captive-reared yellowtail kingfish, Seriola lalandi. A total of 59 yellowtail kingfish were captured off the coast of Jeju Island, after which the broodstock was cultured in indoor culture tank ($100m^3$) until they were 6.1-14.9 kg in body weight. As part of the rearing management for induced sex maturation, the intensity of illumination was maintained at 130 lux. The photoperiod (light/dark; L/D) was set to a 12 L/12 D from October 2013 to January 2014, and 15 L/9 D from February 2014 to June 2014. Feeds comprised mainly EP (Extruded Pellets), with squid cuttlefish added for improvement of egg quality, and was given from April to June 2014. The first spawning of yellowtail kingfish occurred in May 3, 2014, at a water temperature of $17.0^{\circ}C$. Spawning continued until June 12, 2014, with the water temperature set at $20.5^{\circ}C$. Time of spawning was 26 times at this period. The total number of eggs that spawned during the spawning period was $4,449{\times}10^3$. The buoyant rate of spawning eggs and fertilization rate of buoyant eggs during the spawned period were 76.1% and 100%, respectively. The diameters of the egg and oil globule were $1.388{\pm}0.041mm$ and $0.378{\pm}0.029mm$, respectively, which was higher in early eggs than in those from late during the spawned period.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.23 no.4
• /
• pp.169-176
• /
• 1987

The response of file Navodon modestus (GUNTHER) to attraction lamps in line and an adaptation lamp was carried out in the experimental water tank (550L$\times$58W$\times$73H cm). The rate of attraction was investigated in accordance with the intervals of time lighted on and off (1, 5, 10 minute), the intensities of adaptation lamp (1, 10, 20 W) and the two conditions of light stimulus which were the movement of lighted zone (NORMAL) and decrement of lighted zone (NEGA). The results are as follows: 1. Under Normal condition, the variation coefficients which show variation of attraction rate according to the time intervals and the intensities of adaptation lamps were 16.78% (1 min.), 9.71% (5 min.), 8.96% (10 min.), 9.71% (1 W), 15.00% (10W) and 21.08% (20 W) respectively, and attraction rates of the last section was 80.0% (1 min.), 86.0% (5 min.), 85.0% (10 mim.), 86.0% (1 W), 78.7% (10W) and 72.7% (20 W) respectively. 2. Under Nega condition, the file fish was almost distributed all in the illuminated sections, and the majority of the distribution section was adjacent to the extinguished section regardless of the time intervals and the adaptation lamps. 3. Under Nega condition, the variations of attraction rate in the last section became L type, and the attraction rates, when the rest except for the last attraction lamp was extinguished, were 96.7% (1 min.), 100% (5 min.), 96.0% (10 mim.), 100% (1 W), 100% (10W) and 88.0% (20 W) respectively.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.5
• /
• pp.12-18
• /
• 2008

Ag paste was employed for source and drain electrode of OTFTs and for the data metal lines of OTFT-OLED array on PC(polycarbonate) substrate. We tested two kinds of Ag-pastes such as pastes for 325 mesh and 500 mesh screen mask to examine the pattern ability and electrical performance for OTFTs. The minimum feature size was 60 ${\mu}m$ for 325 mesh screen mask and 40 ${\mu}m$ for 500 mesh screen mask. The conductivity was 60 $m{\Omega}/\square$ for 325 mesh and 133.1 $m{\Omega}/\square$ for 500 mesh. For the OTFT performance the mobility was 0.35 $cm^2/V{\cdot}sec$ and 0.12 $cm^2/V{\cdot}sec$, threshold voltage was -4.7 V and 0.9 V, respectively, and on/off current ratio was ${\sim}10^5$, for both screen masks. We applied the 500 mash Ag paste to OTFT-OLED array because of its good patterning property. The pixel was composed of two OTFTs and one capacitor and one OLED in the area of $2mm{\times}2mm$. The panel successfully worked in active mode operation even though there were a few bad pixels.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.3
• /
• pp.323-332
• /
• 1997

Drainage is needed to run off excessive water stress during the rainy season for soybean cultivation in the converted upland from paddy field. This study was conducted to evaluate the effect of planting dates and drainage methods on growth and yield of sprout soybeans in the converted upland from paddy field. The stem and root growth at flowering stage showed no difference by drainage method but plant height, number of nodes and branches, and fresh weight of stem and root were much greater as planting date delayed. Seed yield was correlated positively with fresh weight of stem and root, and T/R ratio at the flowering stage, respectively. Lodging degree was not different by drainage method but was higher in planting at June 16 than May 15. Number of pods and 100 seed weight were not different by drainage method and 100 seed weight was heavy in Eunhakong, light in Kwangankong as planting date delayed. Higher seed yield was observed in surface drainage than open ditched drainage. Yield performance of Eunhakong was good in late planting, while that of Kwangankong was in early planting.

• Journal of the Korean Applied Science and Technology
• /
• v.27 no.2
• /
• pp.137-143
• /
• 2010

Oxide semiconductors Thin-film transistors are an exemplified one owing to its excellent ambient stability and optical transparency. In particular zinc oxide (ZnO) has been reported because It has stability in air, a high electron mobility, transparency and low light sensitivity, compared to any other materials. For this reasons, ZnO TFTs have been studied actively. Furthermore, we expected that would be satisfy the demands of flexible display in new generation. In order to do that, ZnO TFTs must be fabricated that flexible substrate can sustain operating temperature. So, In this paper we have studied low-temperature process of zinc oxide(ZnO) thin-film transistors (TFTs) based on silicon nitride ($SiN_x$)/cross-linked poly-vinylphenol (C-PVP) as gate dielectric. TFTs based on oxide fabricated by Low-temperature process were similar to electrical characteristics in comparison to conventional TFTs. These results were in comparison to device with $SiN_x$/low-temperature C-PVP or $SiN_x$/conventional C-PVP. The ZnO TFTs fabricated by low-temperature process exhibited a field-effect mobility of $0.205\;cm^2/Vs$, a thresholdvoltage of 13.56 V and an on/off ratio of $5.73{\times}10^6$. As a result, We applied experimental for flexible PET substrate and showed that can be used to ZnO TFTs for flexible application.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.11
• /
• pp.245-248
• /
• 1997

Operative interventions for the management of osteonecrosis of the femoral head (ONFH) include core drilling, with or without vascularized fibular bone grafting. Nevertheless, their clinical results have not been consistently satisfactory. Recently, a new surgical procedure that incorporates cementation with polymethylmethacrylate (PMMA) after core drilling has been tried clinically. In this study, a biomechanical analysis using a finite element method(FEM) was undertaken to evaluate surgical methods and their underlying surgical parameter. Our finite element models included five types. They were (1) normal model (Type I), (2) necrotic model (Type II), (3) core decompressed model (Type III). (4) fibular bone grafted model (Type IV), and (5) cemented with PMMA model (Type V). The geometric dimensions of the femur were based on digitized CT-scan data of a normal person. Various physiological loading conditions and surgical penetration depths by the core were used as mechanical variables to study their biomechanical contributions in stress transfer within the femoral head region. In addition. the peak von Mises stress(PVMS) within the necrotic cancellous bone of the femoral head was obtained. The fibular bone grafted method and cementation method provided optimal stress transfer behaviors. Here. substantial increase in the low stress level was observed when the penetration depth was extended to 0mm and 5mm from the subchondral region. Moreover, significant decrease in PVMS due to surgery was observed in the fibular bone grafted method and the cementation method when the penetration depths were extended up to 0 and 5mm from the subchondral region. The drop in PVMS was greater during toe-off than during heel-strike (57% vs. 28% in Type IV and 49% vs. 22% in Type V). Both the vascularized fibular bone grafting method (Type IV) and the new PMMA technique (Type V) appear to be very effective in providing good stress transfer and reducing the peak Von-Mises stress within the necrotic region. Overall results show that fibular bone grafting and cementation methods are quite similar. In light of above results, the new cementation method appears to be a promising surgical alternative or the treatment of ONFH. The use of PMMA for the core can be less prone to surgical complication as opposed to preparation of fibular bone graft and can achieve more immediate fixation between the core and the surrounding region.

• Journal of the Korean Society of Radiology
• /
• v.9 no.2
• /
• pp.67-72
• /
• 2015

In diagnostic radiology, the use of automatic exposure control device is internationally recommended for diagnosis and optimization. However, if exposed to prolonged radiation is a complicated manufacturing process, there is a problem that occurs decrease of various performance overall brightness sensor, which is commercially available conventional. Therefore, in this study, absorption of X-ray is high, and I want to evaluate the AEC applicability of the sensor of the photoconductor-based production has an easy advantage. Experimental results confirms the possibility of fabrication of the sensor through an increase in the SNR, with the detection efficiency superior, accurate turn-off. In addition, it is confirmed that the experimental results of the transmittance and the latent image, Ghost effect by the light conductor does not appear, in the case of a photoconductor with the exception of the PbO, 80% - and it was confirmed good transmittance of 90%. Therefore, excellent mechanical stability and poor performance due to a change of the doping concentration than the existing products that have been put to practical use, the sensor easy photoconductor based, fabrication and can be applied as AEC sensor is expected.

• Korean Journal of Environmental Agriculture
• /
• v.33 no.1
• /
• pp.57-62
• /
• 2014

BACKGROUND: Defoliation in grapevine cultivation is practically used to improve light environment within the canopy and thereby fruit quality. Effects of defoliation in five-year-old 'Pione' grapevine during cultivation with heating were investigated to find out optimum ratio of leaf area to fruit cluster weight (L/F). METHODS AND RESULTS: The grapevines were defoliated with berry-thinning 20 days after full bloom to provide various levels of L/F. At harvest, total leaf area values of fruit bearing branches were between 0.23 and $0.60m^2$. With increasing L/F, soluble solids and anthocyanin contents curvilinearly increased ($R^2=0.76^{**}$). At L/F over $0.6m^2/kg$, soluble solids content (SSC) leveled off. With increasing L/F, titratable acidity (TA) linearly decreased ($R^2=0.87^{**}$), but the ratio of SSC to TA linearly increased ($R^2=0.86^{**}$). Anthocyanin content was significantly correlated with SSC and the ratio of SSC to TA ($R^2=0.80^{**}$ and $0.82^{**}$, respectively). When total leaf area per fruit bearing branch was maintained $0.40m^2$, soluble solids and anthocyanin contents linearly decreased ($R^2=0.79^{**}$ and $0.85^{**}$, respectively), but TA linearly increased with increasing fruit cluster weight ($R^2=0.70^{**}$). Fruit was low in quality when the L/F was below $0.6m^2/kg$. CONCLUSION: L/F is recommended to be maintained at least $0.6m^2/kg$ in 'Pione' grapevine during cultivation with heating to produce higher-quality fruits.

• Applied Chemistry for Engineering
• /
• v.9 no.4
• /
• pp.497-503
• /
• 1998

The catalytic oxidation of 1.2-dichloroethane was investigated over precious metal supported on alumina using a fixed bed microreactor. Among the catalysts tested, the conversion of 1.2-dichloroethane decreased in the following order : Ru > Pt > Pd $${\sim_=}$$ Rh and Pt was found to be the most active catalyst for the complete oxidation of 1.2-dichloroethane to $CO_2$. Major products containing carbon were vinyl chloride and $Co_2$ at temperature ranging from 200 to $400^{\circ}C$. The presence of vinyl chloride in products suggests that the first step in the oxidation of 1.2-dichloroethane is dehydrochlorination and the second is oxidation of vinyl chloride to $CO_2$. To investigate the effect of HCl on the activity of the complete oxidation, some experiments were conducted by adding HCl to the feed. The presence of HCl increased the conversion of 1.2-dichloroethane below $300^{\circ}C$ owing to the increase of surface acidity, but it didn't affect the conversion above $300^{\circ}C$. The reversible adsorption of HCl onto catalyst surface inhibited the complete oxidation to $CO_2$.

• Journal of Conservation Science
• /
• v.31 no.2
• /
• pp.87-94
• /
• 2015

Plastic artwork can be appeared crack, change of color and whitening event by various environment conditions. A large scale plastic artwork often exhibits in outside it will be directly degraded by physical and chemical degradation factor such as strong sunlight, high humidity and rainfall. We should know degradation characteristic of plastics to prevent these damages. In this study, we studied degradation characteristic of plastics (5 types of wide use plastics; polypropylene, polystyrene, polyethylene, polyvinyl chloride, polyurethane) depending on various artificial degradation conditions such as high temperature, ultraviolet and these complex conditions (high temperature and ultraviolet). As a result, polypropylene, polystyrene and polyethylene show the most visible change especially polypropylene, polystyrene. Polypropylene didn't show a great change degree of tensile strength and contact angle, on the other hand polystyrene did. Polypropylene and polystyrene weakened by photo degradation, polyvinyl chloride and polyurethane had relatively good light stability. Also the high temperature and complex conditions were most degradation characteristic. High temperature worked for degradation catalyst because its energy can not enough worked for cut off binding energy of plastics while ultraviolet condition effected as directly degradation condition. Though following results, we expect it can be applied to investigation of degradation factor depending on plastic artwork materials and basic result of plastic artworks conservation.