• 천문학회보
• /
• 제36권1호
• /
• pp.35.1-35.1
• /
• 2011

The solar X-ray telescopes, the Yohkoh SXT and the Hinode XRT, have observed for a couple of decades a variety of coronal structures in the range of wide field-of-view (FOV) covering the full solar disk. It has been emphasized that the optical structure of solar telescopes should be designed with care for improving the uniformity over the full FOV. The vignetting effect is one of the important optical characteristics for describing the performance of a telescope, which reflects the ability of collecting the incoming light at different locations and different photon energies. The correction of this vignetting effect would be an important calibration step that should be performed in advance, especially when the observed images are to be used for photometric purposes. Since the vignetting effect of solar X-ray telescopes shows wavelength dependence, a special care should be taken when, for example, performing the temperature analyses with thin and thick filters for flaring activities observed at the periphery of the full FOV. The results of analysis of pre-launch calibration data for the evaluation of vignetting effect will be introduced in detail.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.57-58
• /
• 2008

We have studied an organic layer and semitransparent Al electrode thickness dependent optical properties and microcavity effects for top-emission organic light-emitting diodes. Manufactured top-emission device structure is Al(100nm)/TPD(xnm)/Alq(ynm)/LiF(0.5nm)/Al(25nm). While a thickness of total organic layer was varied from 85nm to 165n, a ratio of those two layers was kept to be about 2:3. Semitransparent Al cathode was varied from 20nm to 30nm for the device with an organic layer total thickness of 140nm. As the thickness of total organic layer increases, the emission spectra show a shift of peak wavelength from 490nm to 580nm, and the full width at half maxima from 90nm to 35nm. The emission spectra show a blue shift as the view angle increases. Emission spectra depending on a transmittance of semitransparent cathode show a shift of peak wavelength from 515nm to 593nm. At this time, the full width at half maximum was about to be a constant of 50nm. With this kind of microcavity effect, we were able to control the emission spectra from the top-emission organic light-emitting diodes.

• Transactions on Electrical and Electronic Materials
• /
• 제10권1호
• /
• pp.28-30
• /
• 2009

We have studied organic layer-thickness dependent electrical and optical properties of bottom- and top-emission devices. Bottom-emission device was made in a structure of ITO(170 nm)/TPD(x nm)/$Alq_3$(y nm)/LiF(0.5 nm)/Al(100 nm), and a top-emission device in a structure of glass/Al(100 nm)/TPD(x nm)/$Alq_3$(y nm)/LiF(0.5 nm)/Al(25 nm). A hole-transport layer of TPD (N,N'-diphenyl-N,N'-di(m-tolyl)-benzidine) was thermally deposited in a range of 35 nm and 65 nm, and an emissive layer of $Alq_3$ (tris-(8-hydroxyquinoline) aluminum) was successively deposited in a range of 50 nm and 100 nm. Thickness ratio between the hole-transport layer and the emissive layer was maintained to be 2:3, and a whole layer thickness was made to be in a range of 85 and 165 nm. From the current density-luminance-voltage characteristics of the bottom-emission devices, a proper thickness of the organic layer (55 nm thick TPD and 85 nm thick $Alq_3$ layer) was able to be determined. From the view-angle dependent emission spectrum of the bottom-emission device, the peak wavelength of the spectrum does not shift as the view angle increases. However, for the top-emission device, there is a blue shift in peak wavelength as the view angle increases when the total layer thickness is thicker than 140 nm. This blue shift is thought to be due to a microcavity effect in organic light-emitting diodes.

• 한국균학회지
• /
• 제15권4호
• /
• pp.224-230
• /
• 1987

표고버섯의 미토콘드리아는 설탕밀도 선형기울기 원심분리법으로 정제하여, 광감응성 mitochondrial ATPase의 유기물 효과, 광증감제 효과 및 파장 변화에 따른 $K^+$ 이온의 유입 효과를 실험하였다. 1. 이 효소는 10m mol dithiothreitol 및 0.1m mol quinacrine에 의하여 각각 139% 및 128%의 활성도를 증가시켰다. 2. $100\;{\mu}g$의 oligomycin과 1m mol phlorizin은 이 효소의 활성을 각각 48% 및 45% 억제시켰다. 3. 광증감제인 0.1m mol phenazine methosulfate는 이 효소의 활성도를 36% 촉진시켰다. 4. $K^+$ 이온 유입 효과의 최적 파장은 690nm였고, 이때의 최적 pH 및 최적 온도는 각각 7.2 및 $55^{\circ}C$였다.

• Journal of Photoscience
• /
• 제9권2호
• /
• pp.485-487
• /
• 2002

Cells receive signals for survival as well as death, and the balance between the two ultimately determines the fate of the cells. UV-triggered apoptotic signaling has been well documented, whereas UV-induced survival effects have received little attention. We have reported previously that UVB irradiation prevented apoptosis, which was partly dependent on activation of the phosphatidylinositol 3-kinase (PI3-kinase)/ Akt pathway. In this study, anti-apoptotic effects of UV with different wavelength ranges, UVA, UVB and UVC, were examined. NIH3T3 cells showed apoptotic cell death by detachment from the extracellular matrix under serum-free conditions, which was prevented by all wavelengths. However, the effect of UVA was less than those of UVB and UVC. Reduction of mitochondrial transmembrane potential and activation of caspase-9 and -3 were suppressed by all three wavelengths of UV, showing wavelength-dependent effects as mentioned above. The PI3-kinase inhibitor wortmannin partially inhibittrl the UVB and UVC-induced suppression of apoptosis, but not the inhibitoty effect of UVA. The Akt phosphotylation by UVB and UVC was completely inhibittrl by addition of wortmannin, but that by UVA was not P38 MAP kinase inhibitor SB203580 partially inhibited the UVB and UVC-induced suppression of apoptosis and Akt phosphotylation, and completely inhibited UVA-induced those. These results suggested the existence of two different survival pathways leading to suppression of apoptosis, one for UVA that is independent of the PI3-kinase/Akt pathway and dependent on p38 MAP kinase, and the other for UVB and UVC that is dependent on both pathways.

• 한국콘텐츠학회논문지
• /
• 제19권12호
• /
• pp.527-534
• /
• 2019

범죄현장에 남겨진 지문은 대부분 잠재지문의 형태이기 때문에 육안으로는 쉽게 식별되지 않으므로 눈에 잘 보이도록 현출해야 한다. 그러나 잠재지문을 현출한 이후에도 배경으로부터 지문이 잘 보이도록 추가적인 증강이 필요하며 주로 사용하는 방법에는 광학적 방법이 있다. 광학적 방법은 일부 분말 또는 시약에 적절한 광원을 비췄을 때 형광을 보이는 성질을 이용한다. 따라서 적절한 파장의 광원과 필터를 사용하면 지문 이미지를 증강할 수 있으므로 광원과 필터의 조합이 매우 중요하다. 하지만 적용한 기법과 사용한 광원에 따라서 배경에서 반사된 빛의 파장 대역과 필터가 가진 파장 대역이 서로 겹쳐서 반사광을 잘 차단(cut-off)하지 못하는 경우에는 이상적인 증강의 효과를 얻기 어렵다. 이 연구에서는 450 nm 파장의 녹색 광원과 505 nm 파장의 청색 광원에 low-pass 필터를 광원에 장착함으로써 광원의 파장을 개선한 결과 더 좋은 품질의 지문 이미지를 얻을 수 있었다.

• 한국약용작물학회지
• /
• 제28권3호
• /
• pp.200-208
• /
• 2020

Background: Salvia miltiorrhiza Bunge has been used in traditional medicine. The type of light source has an effect on the growth properties and composition of functional compounds in plants. In this study, we analyzed the effects of different artificial light sources on the growth characteristics as well as antioxidant and antimicrobial activities of S. miltiorrhiza. Methods and Results: Seedlings of S. miltiorrhiza were grown under various artificial light sources, including fluorescent light (FL), light emitting diode (LED), and microwave electrodeless light (MEL), for 8 weeks. Growth characteristics were the best in plants treated with MEL. DPPH scavenging activity of the shoot was more pronounced with the FL treatments, while the roots were more active in plants grown under single wavelength lights (i.e., blue and red LEDs). Among the different light source treatments, the blue LED resulted in a higher total phenolic content in the plants. Furthermore, growing plants growth under the red LED enhanced their total flavonoid content. Notably, the antimicrobial properties of plants varied significantly between light source treatments in this study. Except for E. coli, all the tested microorganisms were susceptible to the plant extracts. Conclusions: The type of light source may be an important parameter for the enhancement of plant growth and functional compounds in S. miltiorrhiza.

• 한국식품저장유통학회지
• /
• 제19권3호
• /
• pp.354-360
• /
• 2012

새송이 버섯 재배에 효과적인 LED 광질을 구명하기 위하여, 청색광(450 nm), 적색광(650 nm), 녹색광(525 nm), UV-A(365 nm) 및 혼합광(청$^*$적, 청$^*$녹, 적$^*$녹, 청$^*$적$^*$녹$^*$UV-A)의 LED광을 이용하여 재배한 새송이버섯의 품질특성을 조사하였으며, 대조구의 광원으로는 관행재배에 이용되고 있는 형광등을 사용하였다. LED의 파장이 길어질수록 총 길이가 길어지는 경향이었으며, 중량 또한 증가하는 것으로 나타났다. 또한, 섬유소, 단백질 및 무기질의 함량은 높고, 조지방의 함량은 매우 낮았으며, LED광을 이용하여 재배한 모든 구에서 조섬유 함량의 증가가 나타났다. 경도를 측정한 결과, 갓은 전반적으로 대조구와 유사한 조직감을 나타내었고, 자루는 적색광, 녹색광, 적 녹 혼합광 및 UV-A의 조건 하에서 재배한 새송이버섯이 유의적으로 낮은 것으로 나타났다. 한편, 적색광, 녹색광 및 적 녹 혼합광 처리구의 갓이 밝은 계통의 색으로 대조구의 갓 색과 유사하였고, 자루의 길이 역시 대조구와 비슷한 수준으로 생장하였다. 밝은 계통의 갓을 가진 구는 자루도 밝은 경향이었으며, 자루의 색도 측정 결과도 갓과 유사한 경향을 나타냈다. 관능평가 결과 외관이 대조구와 흡사할수록 높은 점수를 받았으며, 그 중 적색광 처리구가 선호경향이 가장 강한 것으로 나타났다. 반면, UV-A 및 청색광을 포함한 나머지 처리구는 어두운 계통의 갓으로 표고버섯 수준의 색을 띄었으며, 신장이 억제되어 짧은 자루를 가진 새송이버섯이 재배되었다. 또한, 이상의 결과로 광질은 새송이버섯의 품질에 큰 영향을 미치는 것을 알 수 있었으며, 새송이버섯 재배에 LED 기술을 접목시킬 때에는 적색광을 이용하는 것이 가장 적합한 것으로 판단된다.

• 전력전자학회논문지
• /
• 제19권4호
• /
• pp.327-331
• /
• 2014

LED(Light Emitting Diode) is a semiconductor device utilizing electroluminescent effect is a phenomenon in which a type of P-N junction diode, the light of short wavelength which a voltage is applied in the forward direction is released. LED is advantageous in reducing the energy as environmentally materials that can greatly reduce the carbon emissions, recent it has attracted attention IT(Information Technology) and GT(Green Technology) industry. In addition, there are advantages long life, high efficiency, and excellent response speed, LED have come into the spotlight as the illumination means to replace the existing fluorescent light and incandescent light bulb. When connecting to MR16 electronic transformer for existing LED driver circuit, due to malfunction of the dimmer and the electronic transformer, flicker occurs and linear dimming is not possible. Therefore, in this paper, we suggest an LED drive circuit there is no flicker with the corresponding dimming MR16 electronic transformer. Further, we explain the principles of the LED current control technique and the principle of the drive circuit of the LED, in order to validate the proposed circuit through prototyping and simulation.

• 한국재료학회지
• /
• 제19권6호
• /
• pp.313-318
• /
• 2009

Polymer Light Emitting Diodes (PLEDs) with an ITO/PEDOT:PSS/PVK/PFO-poss/LiF/Al structure were prepared on plasma-treated ITO/glass substrates using spin-coating and thermal evaporation methods. The annealing effects of the PFO-poss film when it acts as the emission layer were investigated by using electrical and optical property measurements. The annealing conditions of the PFO-poss emission film were 100 and $200^{\circ}C$ for 1, 2 and 3 hours, respectively. The luminance increased and the turn-on voltage decreased when the annealing temperature and treatment time increased. After examining the Luminance-Voltage (L-V) properties of the PLED, the maximum luminance was found to be 1497 cd/$m^2$ at 11 V for the device when it was annealed at $200^{\circ}C$ for 3 hours. The peak intensity of the PLED emission spectra at approximately 525 nm in wavelength increased when the annealing temperature and time of the PFO-poss film increased. These results suggest that the light emission color shifted from blue to green.