• 한국산림과학회지
• /
• 제95권5호
• /
• pp.614-620
• /
• 2006

To study the chlorophyll contents and photosynthetic characteristics of 4 tree species of deciduous hardwoods; Betula platyphylla var. japonica, Zelkova serrata, Acer mono and Prunus sargentii were treated in 3 stages of shading; the full sun treatment, the medium shade treatment with 30% of transmittance comparing to full sun, the intense shade treatment with 8% of transmittance and their changes in chlorophyll contents and photosynthetic characteristics were examined and analyzed. Most hardwoods showed differences in the total chlorophyll contents in the order of May < September < July, however, that in Prunus sargentii increased progressively along with the lapse of time. Concerning the degree of shading, total chlorophyll contents increased in proportion to the level of shading. Betula platyphylla var. japonica and Prunus sargentii showed more than 2-3 times difference between the full sun treatment and the intense shade treatment. The changes in photosynthetic characteristics, the range of the light saturation point of the trees was $1,000{\sim}1,100{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ in May, before the shading was applied, and the intensity was shown in the order of Betula platyphylla var. japonica > Zelkova serrata > Acer mono > Prunus sargentii. The photosynthetic rate was $6.4{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}{\sim}27.1{\mu}mol{\cdot}CO_2{\cdot}m^{-2}{\cdot}s^{-1}$ in the order of Betula platyphylla var. japonica > Prunus sargentii > Acer mono > Zelkova serrata that there were differences between species. Concerning the changes in light saturation point in each growth period after shading treatment, the light saturation point in the full sun treatment was found in the range of $560{\sim}1,100{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ and the level of intensity was shown in the order of May > July > September. The light saturation point decreased as the level of shading intensified and the level of changes in light compensation point in the full sun treatment for Betula platyphylla var. japonica and Prunus sargentii was shown in the range of $2.9{\sim}27.1{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ in the order of May > July > September, however, for Zelkova serrata and Acer mono was shown in the range of $3.9{\sim}11.7{\mu}mol{\cdot}CO_2{\cdot}m^{-2}{\cdot}s^{-1}$ in the order of July > May > September that there were differences between species.

• 한국염색가공학회지
• /
• 제16권5호
• /
• pp.8-18
• /
• 2004

In order to study on the color change of silk dyed with natural colorant due to light fading, and find out the effect of combination dyeing, colorant extracts of safflower red, safflower yellow and amur cork tree were used, either singly or in combination. In combination dyeing, safflower yellow or amur cork tree dyeing process was added on the top of the silk fabric was dyed with safflower red. Color change and light fastness were investigated by $L^*,\; a^*,\; b^*$ H, V/C, and Color difference. Brightness of silk fabric dyed with safflower red and safflower yellow increased gradually with increasing the radiation time of UV light, but amur cork tree was decreased and turned to dull. Color difference of dyed with Amur cork tree showed higher than the others. Combination dyeing of safflower red and amur cork tree provided better light fastness than the one of safflower red and safflower yellow.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 춘계학술대회 논문집 센서 박막재료연구회 및 광주 전남지부
• /
• pp.58-61
• /
• 2008

$TiO_2$ is a wide band-gap semiconductor (3.4 eV) and can only absorb about 5% of sun light in the ultraviolet light region, which largely limits its practical applications because of the lower utility of sun light and quantum yield. In order to move the absorption edge of $TiO_2$ fims to visible spectrum range, we have made the impurity level within a band-gap of $TiO_2$ thin film by introduction of oxygen vacancy. Oxygen-defected $TiO_2$ thin film have prepared by reactive sputtering with the partial pressure of $Ar:O_2=10:90{\sim}99.33:0.66$ ratio. As a result, we could have the impurity level of about 2.75 eV on condition that oxygen partial pressure is below 7%.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.393-394
• /
• 2008

$TiO_2$ is a wide band-gap semiconductor (3.4 eV) and can only absorb about 5% of sun light in the ultraviolet light region, which largely limits its practical applications because of the lower utility of sun light and quantum yield. In order to move the absorption edge of $TiO_2$ films to visible spectrum range, we have made the impurity level within a band-gap of $TiO_2$ thin film by introduction of oxygen vacancy. Oxygen-defected $TiO_2$ thin film have prepared by reactive sputtering with the partial pressure of Ar:$O_2$=10:90~99.33:0.66 ratio. As a result, we could have the impurity level of about 2.75 eV on condition that oxygen partial pressure is below 7%.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.398-399
• /
• 2006

$TiO_2$ is a wide band-gap semiconductor (3.4 eV) and can only absorb about 5% of sun light. in the ultraviolet light region, which largely limits its practical applications because of the lower utility of sun light and quantum yield. In order to move the absorption edge of $TiO_2$ films to visible spectrum range, we have made the impurity level within a band-gap of $TiO_2$ thin film by introduction of oxygen vacancy. Oxygen-defected $TiO_2$ thin film have prepared by reactive sputtering with the partial pressure of Ar:$O_2$=10:90~99.33:0.66 ratio. As a result, we could have the impurity level of about 2.75 eV on condition that oxygen partial pressure is below 7%.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.97-98
• /
• 2006

For high performance transistor in the 0.14um generation, high speed sram is using a weak region of SCE(Short Channel Effect). It causes serious SCE problem (Vth Roll-Off and Punch-Through etc). This paper shows improvement of Vth roll-off and Ion/Ioff characteristics through high concentration Pocket implant, LDD(Light Dopped Dram) and low energy Implant to reduce S/D Extension resistance. We achieve stabilized Vth and Improved transistor Ion/Ioff performance of 10%.

• 한국태양에너지학회 논문집
• /
• 제31권1호
• /
• pp.31-36
• /
• 2011

CF(Circular Fresnel) POF(Plastic Optical Fiber) daylighting system is a beam daylighting system utilizing solar direct beam radiation. In this study, a CF POF daylighting system has been introduced, developed and applied to KIER test buildings. The CF POF daylighting system consists of three parts: light collector, light transmitter and light diffuser. The light collector includes a Circular Fresnel lens focusing solar direct illuminance by sun tracking. The light transmitter contains the POF cable which has light transmission loss of 4.5% per meter. The light diffuser has about 80% diffuser efficiency. This study aims to evaluate of POF daylighting system performance. At the results of a CFPOF system performance evaluation, the theoretical CFPOF system efficiency was 41.9% and the actual CFPOF system efficiency at the KIER test building was 37.5%. The difference was due partly to the connecting efficiency.

• 방송공학회논문지
• /
• 제21권4호
• /
• pp.538-551
• /
• 2016

방송 제작현장에서는 영상 이미지 표현의 광원으로 Tungsten Halogen 광원이 주 광원으로 사용 되어 왔다. Tungsten Halogen 광원은 그동안 개발된 다른 광원보다 태양광원과 유사한 색 재현성으로 각광받아 왔지만 에너지 효율성의 문제점을 가지고 있었다. 최근 대체 광원으로 고효율의 에너지와 긴 수명의 LED광원이 방송 광원으로 주목받기 시작했다. LED광원은 독특한 발광원리 때문에 카메라를 통한 영상 이미지의 색 재현성과 광원에서 투사되는 빛의 질에 있어서 Tungsten Halogen광원과 다른 특성을 가지고 있다. 이런 특성은 LED광원이 방송 광원으로서 도입이 늦어지는 이유이다. 이에 본 연구에서는 LED 광원의 색 재현성과 빛의 질 특성인 평탄도를 측정하여 기준광원인 Tungsten Halogen과 비교하여 방송 광원으로써의 적합성에 대한 실험 데이터를 제시할 것이다. 또한 LED광원이 방송 광원으로서의 확산되기 위해서 필요한 점이 무엇인지 향후 과제와 기준을 제시하고자 한다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2007년도 추계 학술논문 발표대회
• /
• pp.27-30
• /
• 2007

Recently, use of light-weight panel is increasing in building. Styrofoam sandwich panel is inexpensive and it is excellent in insulation ability and constructability. But styrofoam of panel inside is low ignition point. Consequently, when panel is fired, it is occur in poisonous gas. On the other hand, light-weight foamed concrete is excellent in insulation ability, fire resistance due to inner pore. Properties of light-weight concrete is influenced by foaming agent type. Accordingly, this study investigate in insulation property of according to foaming agent type in order to using light-weight foamed concrete instead of styrofoam. As a results, Non-heating zone temperature of light-weight foamed concrete of using AP, FP are lower than light-weight foamed concrete of using AES. Light-weight foamed concrete of using AES, FP are satisfied with fire performance of two hours at foam ratio 50, 100. Light-weight foamed concrete of using AP is satisfied with fire performance of two hours at AP ratio 0.1, 0.15. Insulation property is better closed pore by made AP, FP than open pore by made AES.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.953-956
• /
• 2009

We have investigated the effect of light on amorphous silicon thin film transistors based photo-sensor applications. We have analyzed the instability caused by electrical gate bias stresses under the light illumination and the effect of photo-induced quasi-annealing on the instability. Threshold voltage ($V_{TH}$) under the negative gate bias stress with light illumination was more decreased than that under the negative gate bias stress without light illumination even though $V_{TH}$ caused by the light-induced stress without negative gate bias was shifted positively. These results are because the increase of carrier density in a channel region caused by the light illumination has the enhanced effect on the instability caused by negative gate bias stress. The prolonged light illumination led to the recovery of shifted VTH caused by negative gate bias stress under the light illumination due to the recombination of trapped hole charges.