• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.252-252
• /
• 2012

It is widely accepted that short exciton diffusion lengths of organic semiconductors with respect to the film thickness limit the charge (hole and electron) separation before excitons recombination in organic photovoltaic (OPV) cells. Therefore the efficient absorption of incident light within the thin active organic layer is of great importance to improve the power conversion efficiency (PCE) of the cells. In this work, we fabricated 2-dimensionally (2D) nano-patterned poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) (PEDOST:PSS) layers using capillary phenomenon and nano-imprinting technology at the scale of several hundred nanometers. This 2D nano-patterned PEDOT:PSS layer exerted photonic crystal effect such as redirection of light paths and variation of light intensity at specified wavelengths. It is also expected that the consequently alternated light pass lengths and intensities change the absorption properties of zinc phthalocyanine (ZnPc) thin films grown on top of the nano-patterned PEDOT:PSS layer. The influence of conductivity and thickness of the PEDOT:PSS layer on the absorption properties of ZnPc thin films were also investigated.

• Korean Journal of Materials Research
• /
• v.23 no.3
• /
• pp.177-182
• /
• 2013

Nanosphere lithography is an inexpensive, simple, high-throughput nanofabrication process. NSL can be done in different ways, such as drop coating, spin coating or by means of tilted evaporation. Nitride-based light-emitting diodes (LEDs) are applied in different places, such as liquid crystal displays and traffic signals. The characteristics of gallium nitride (GaN)-based LEDs can be enhanced by fabricating nanopatterns on the top surface of the LEDs. In this work, we created differently sized (420, 320 and 140 nm) nanopatterns on the upper surfaces of GaN-based LEDs using a modified nanosphere lithography technique. This technique is quite different from conventional NSL. The characterization of the patterned GaN-based LEDs revealed a dependence on the size of the holes in the pattern created on the LED surface. The depths of the patterns were 80 nm as confirmed by AFM. Both the photoluminescence and electroluminescence intensities of the patterned LEDs were found to increase with an increase in the size of holes in the pattern. The light output power of the 420-nm hole-patterned LED was 1.16 times higher than that of a conventional LED. Moreover, the current-voltage characteristics were improved with the fabrication of differently sized patterns over the LED surface using the proposed nanosphere lithography method.

• Journal of Astronomy and Space Sciences
• /
• v.14 no.1
• /
• pp.59-66
• /
• 1997

The relationship between Mg II emission line and light variation of V711 Tau has been derived to investigate the chromospheric activity on V711 Tau. First, a shape of an optical light curve was compared with that of ultraviolet constructed from the IUE low resolution spectra. Second, the intensities of Mg II k emission lines have been reduced from IUE high resolution spectra. The intensity of Mg II k line was compared with brightness of the UV light curve at given phase. The Mg II line intensity is maximum at the phase $O.^{P}4$ where the light is minimum. The evidence of chromosperic activity is indicated by the intensity variation of the MgII emission line with orbital phase for V711 Tau.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.13 no.1
• /
• pp.48-57
• /
• 2013

This paper presents a power management system of the dye-sensitized solar cell (DSSC) for ubiquitous sensor network (USN) applications. The charge pump with a luminance-controlled oscillator regulates the load impedance of the DSSC to track the maximum power point (MPP) under various light intensities. The low drop-out regulator with a hysteresis comparator supplies intermittent power pulses that are wide enough for USN to communicate with a host transponder even under dim light conditions. With MPP tracking, approximately 50% more power is harvested over a wide range of light intensity. The power management system fabricated using $0.13{\mu}m$ CMOS technology works with DSSC to provide power pulses of $36{\mu}A$. The duration of pulses is almost constant around $80{\mu}s$ (6.5 nJ/pulse), while the pulse spacing is inversely proportional to the light intensity.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.6
• /
• pp.2098-2114
• /
• 2021

Light intensity variation is one of the key factors which affect the accuracy of vehicle face re-identification, so in order to improve the robustness of vehicle face features to light intensity variation, a Nonnegative Matrix Factorization model with the constraint of image acquisition time difference is proposed. First, the original features vectors of all pairs of positive samples which are used for training are placed in two original feature matrices respectively, where the same columns of the two matrices represent the same vehicle; Then, the new features obtained after decomposition are divided into stable and variable features proportionally, where the constraints of intra-class similarity and inter-class difference are imposed on the stable feature, and the constraint of image acquisition time difference is imposed on the variable feature; At last, vehicle face matching is achieved through calculating the cosine distance of stable features. Experimental results show that the average False Reject Rate and the average False Accept Rate of the proposed algorithm can be reduced to 0.14 and 0.11 respectively on five different datasets, and even sometimes under the large difference of light intensities, the vehicle face image can be still recognized accurately, which verifies that the extracted features have good robustness to light variation.

• Fashion & Textile Research Journal
• /
• v.6 no.5
• /
• pp.613-617
• /
• 2004

The intent of this study was to determine whether different light exposure could modify the clothing behavior in the evening cold environment or not. Nine female subjects volunteered to this study. In a bright light or a dim light condition, light intensity was controlled 3000 lx or 10 lx respectively. Subjects were introduced to wear various kinds of garments whenever they need to feel comfortable as the room temperature began to decrease. The room temperature was lowered from $30^{\circ}C$ to $15^{\circ}C$ for one hour (21:00 h~22:00 h) and maintained at $15^{\circ}C$ for additional one hour (22:00 h~23:00 h). Subjects stayed in chamber from 08:00 to the next day 07:00. Clothing behavior, core temperature, subjective temperature sensation and melatonin secretion were measured. Most subjects put on the clothing more quickly and more thickerly in the bright light rather than in the dim light condition. The fall of core temperature during night was significantly less under the bright light in the late afternoon, suggesting that the set-point of core temperature has been set at a higher level during the evening and the night, being supported by the less amount of melatonin secretion. Thus, it is concluded that the quicker dressing behavior with thicker clothing in the "Bright" condition is advantageous in evening cold exposure, since it enables the core temperature to reach its set-point value more easily.

• Korean Journal of Metals and Materials
• /
• v.49 no.9
• /
• pp.732-738
• /
• 2011

Silicon oxide thin films were deposited by using a plasma-enhanced chemical-vapor deposition technique to investigate the light emission properties. The photoluminescence characteristics were divided into two categories along the relative ratio of the flow rates of $SiH_4$ and $N_2O$ source gases, which show light emission in the broad/visible range and a light emission peak at 380 nm. We attribute the broad/visible light emission and the light emission peak to the quantum confinement effect of nanocrystalline silicon and the Si=O defects, respectively. Changes in the photoluminescence spectra were observed after the post-annealing processes. The photoluminescence spectra of the broad light emission in the visible range shifted to the long wavelength and were saturated above an annealing temperature of $900^{\circ}C$ or after 1 hour annealing at $970^{\circ}C$. However, the position of the light emission peak at 380 nm did not change at all after the post-annealing processes. The light emission intensities at 380 nm initially increased, and decreased at annealing temperatures above $700^{\circ}C$ or after 1 hour annealing at $700^{\circ}C$. The photoluminescence behaviors after the annealing processes can be explained bythe size change of the nanocrystalline silicon and the density change of Si=O defect in the films, respectively. These results support the possibility of using a silicon-based light source for Si-optoelectronic integrated circuits and/or display devices.

• ALGAE
• /
• v.37 no.2
• /
• pp.163-174
• /
• 2022

Light-emitting-diodes (LEDs) are a lighting source useful for the precise evaluation of light quality effect on biological systems. Despite the importance of light spectra on the regeneration of land plant protoplasts ("naked cells"), this factor has not been tested yet on protoplasts from multicellular algae. This study reports on the effects of pure primary colors (red, blue, and green), dichromatic (red plus blue, RB, 1 : 2) and white LEDs on protoplast regeneration from male and female Undaria pinnatifida gametophytes. We also evaluated the effect of different light spectra on pigment composition (chlorophyll a, chlorophyll c, and fucoxanthine), and the light intensities under the best condition on the regeneration process. In the early stages, blue or RB LEDs increased the percentage of dividing female protoplasts, whereas red, blue, and RB LEDs enhanced that of dividing male protoplasts. In the later stages, RB LEDs showed a positive effect only on the percentage of multiple rhizoid-like protrusions (male gametophyte). They also increased the final area of both regenerated gametophytes. The LEDs did not affect pigment composition in female gametophytes. In male gametophytes, in contrast, they reduced chlorophyll c, while blue, RB, and green LEDs decreased fucoxanthin. Under RB LEDs, the optimal light intensity was 80 µmol photons m^-2 s^-1 for female gametophytes and 40 to 60 µmol photons m^-2 s^-1 for male gametophytes. Our results suggest that dichromatic LED illumination (red-blue) improves regeneration of U. pinnatifida gametophyte-isolated protoplasts. Thus, dichromatic LEDs might a suitable light source for enhancing protoplast regeneration in brown seaweeds.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.7 no.1
• /
• pp.40-49
• /
• 2004

This work carried out to define the characteristic of Cymbidium kanran habitat at Mt. Halla in Jejudo, Korea from the ecological point of view including geological and topographical features, air and soil temperature, relative humidity, fluctuations of light intensity, habitat vegetation, distribution altitude, area limit, and etc. And another goal of this study consider the conservation counterplan of the cymbidium habitat. Natural distribution areas of the cymbidium were observed more abundantly on the well drained south and east-facing slopes. Soil acidity was ranged from pH 4.1 to 5.3, and electric conductivity was ranged from 176.4 to 299.9 us/cm (average 215.3 us/cm). Base-saturation percentage of the habitat soil was below 50%, bulk density 0.42g/$cm^2$, particle density 2.05g/$cm^2$, humus content 26%, total nitrogen 0.82%, available phosphate 4.2 mg/kg, exchangeable potassium 0.63 Cmol/kg, calcium 0.44 Cmol/kg and magnesium 0.67 Cmol/kg. Annual mean air temperature was $15.4^{\circ}C$, however, air temperature was ranged $11.7{\sim}18.2^{\circ}C$ in spring, $21.2{\sim}23.8^{\circ}C$ in summer, $12.8{\sim}22.0^{\circ}C$ in fall and $5.5{\sim}7.8^{\circ}C$ in winter season. Annual mean soil temperature at depth of 10cm was $13.2^{\circ}C$ And minimum value was recorded $4.7^{\circ}C$ on January, and maximum value $22.5^{\circ}C$ on August. Relative humidity was ranged 90.8~94.7% in summer, 80.8~91.5% in fall and 77.6~84.2% in winter season. Minimum value was 56.5% on December, and maximum value was 100% on July and August. Light intensities were ranged from 400 to 1,800 lux at the greater part of Cymbidium kanran sites in Jejudo. Summer regarded as an lower light intensities was recorded to be range of 500~600 lux; however, autumn and winter were shown higher light regimes ranged from 3,500 to 3,800 lux. Therefore, one must be suprised that the cymbidium grow at the light condition of 6 lux (minimum) or 10,000 lux (maximum). Tree species keeping higher frequency rate and density were Eurya japonica, Camellia japonica, Castanopsis cuspidata, Carpinus laxiflora and Pinus densiflora. Number of trees growing in a 5${\times}$5m quardrat was 35 as an average, and proportion of evergreen versus deciduous was 5:1. Distribution altitude of the orchid habitat was ranged from 120m (low) to 840m (high) from sea level on the south facing slope of Mt. Halla, and was ranged eastern borderline of Gujwaup, Bukjejugun to western boundaries of Jungmundong, Seogwipo city. For the stable conservation of Cymbidium kanran habitat, sunlight regimes must be increased more by means of cutting trees or twigs in the site.

• Journal of Korea Foresty Energy
• /
• v.20 no.2
• /
• pp.58-68
• /
• 2001

This study was carried out to investigate the growth and biomass production of Abies koreana seedlings under different relative light intensity. The 5-year-old potted seedlings were grown for 24 months under different light intensity of 100%, 50%, 30%, 10% and 2% of the natural full light intensity. The results were as follows: 1. Height growth was similar in the seedlings under different light intensities except in 2% of the full sun light intensity, having shown the lowest height growth. 2. Root collar diameter growth was reduced gradually by decreasing of the relative light intensity. 3. The seedlings which were grown under relatively low light intensity showed the later starting date of the stem growth in the next spring and showed the smaller number of new needles, and the smarter number and the shorter length of new shoot of the seedlings. 4. Total dry mass including the dry mass of leaves, shoot and root was reduced by decreasing of the relative light intensity. 5. In case of the seedling grown in one year shading condition, the ratio of the dry mass of current-year needles and stem to that of the above one-year-old needles and stem was ranged from 0.99$\pm$0.25 to 1.06$\pm$0.06 and was not significally different among the seedlings grown under 100%, 50% and 30% of the relative light intensity. And the radio was ranged from 0.60$\pm$0.04 to 0.52$\pm$0.03 in the seedlings grown under 10% and 2% of the relative light intensity, respectively. In case of the seedling grown in two years shading, the ratio of the dry mass of current-year needles and stem to that of the above one-year-old needles and stem was ranged from 0.79$\pm$0.04 to 1.00$\pm$0.03 and was not significally different among the seedlings grown under 100, 50, 30% and 10% of the relative light intensity. And the ratio was 0.29$\pm$0.03 in the seedlings grown under 2% of the relative light intensity, respectively. 6. T/R ratio of the seedlings grown in one year shading condition was ranged from 3.35$\pm$0.33 to 4.61$\pm$0.25 and was not significantly different among the relative light intensities of 100%, 50%, 30% and 10%. The seedlings grown under 2% of relative light intensity showed the highest T/R ratio of 7.36$\pm$0.15. In case of the two years shadings the T/R ratio was ranged from 1.76$\pm$0.11 to 3.12$\pm$0.19 and increased as relative light intensity decreased except 2.01$\pm$0.14 in 2% of relative light intensity.