• Journal of Technologic Dentistry
• /
• v.11 no.1
• /
• pp.71-81
• /
• 1989

This study was aimed for bettering productivity and technical level of the dental 1 aboratory, and helping the dental technician's benefits and rights, and then endowing them some belonged atmospher and stability on their post by Improving job- satisfaction and maintaining the transferability of one's post at a proper limitation. Therefore, 320 dental technicians extracted randomly from all the technicians working at 494 dental laboratories were subjected for this study. The approach to the study was a way through some postal questionaires executed from March 29, 1988 until May 4, the same year, in which total 254 technicians answered, showing 79% resp"nserate. responserate. The data-analysis was done by a model of the dental technician's transferability from their post, as considering Mobley's(1978)-model of post-transferability, and results through the study are as follows : 1. Satisfaction at a given post showed that the married is better than the unmarried(<0.05), and the experienced is better than the inexperienced(P<0.01). 2. Age, sex, educational experience, and one's service-duration did not affect significantly to the respondent's satisfaction on their post, statistically. 3. Satisfaction at a given post differed in adccordance with given conditions of one's post, i. e.,it stowed high when the monthly payment was good(P<0.05), and when too much duty on their job was given, it was the worst as shown in an example of the next order, too much

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.9
• /
• pp.2280-2288
• /
• 2014

The conventional dimming control methods of LED (Light-emitting dioades) include Analog, PWM (Pulse Width Modulation), and FM (Frequency Modulation) Control. Analog dimming is controlled by adjusting forward current of Power LED. Although Analog dimming is possible to control linearly the brightness levels on a whole range (0%~100%), it comes into existence a variation of wavelength by changing the Power LED's forward current. PWM dimming has achieved by varying in duty of full current flowing to the Power LED. Generally, PWM dimming doesn't make variation of wavelength but have difficulty with adjusting the linear brightness level between 0% and 10%. FM dimming method is on the same wavelength as PWM dimming, however, it has problem of flickering at low level of dimming. This paper propose a efficient dimming control method of Power LED in order to overcome the disadvantages of the above mentioned methods. We apply to Analog method in low level of dimming control and use PWM method in dimming range from 10% to 100%. For the experiment, we design and implement a circuit and test the proposed method. Consequently, we can control the linear brightness of Power LED across the whole range and get the constant wave at different dimming level. The experimental results show the benefits of the proposed method.

• Archives of design research
• /
• v.12 no.4
• /
• pp.317-326
• /
• 1999

The Korean traditional color passed down over countless generations has surpassed both surpassed both time and space and continue today to breathe life into its people's everyday. In order to clarify the characteristics of Korean traditional color blue and red, we investigate the names of them and measured the color tones of textile remains in Chosun era. The characteristics of Korean traditional color blue and red have been surveyed by means of the examination of color names in many famous literatures in Chosun era. Korean terms for color tones were characterized by enormous variety of epithes crowned on them. The color names mentioned contain many unaccountable epithes which were characterized also deep colors and light colors were dominant in it. As a means of enhancing possibilities within limited colors, the commoners increased the names for varying tones of blue color group(32kinds) and red color group(40kinds). These "blue(indigo dyeing)' and 'red(safflower dyeing)' in Chosun era were shown very high frequency in use and the costume colors in Royal Court. With combination of these various blue and red colors they represented a thought of color based on Yinyang Theory and created a polished aesthetic taste. The color samples of textile remains in museum were measured and designated by Munsell color system and the ISCC-NBS color designation system. THe appeared rates were derived on Chosun era and features of colors using on the period were discussed. We aim to present specific recipes in indigo dyeing and safflower dyeing for using our apparel product and folk art.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.6
• /
• pp.4328-4334
• /
• 2015

We determined a method to determine marine planktonic organism viability using Evan's blue, Aniline blue, and 5-choromethyfluorescein diacetate (CMFDA). The Evan's blue and Aniline blue methods produced bright blue light for dead phytoplankton and zooplankton and were the best dyes to detect dead cells. The staining efficiency of Evan's blue and Aniline blue were ${\geq}90%$ of the original field sample. However, it was difficult to test the efficiency of a ship's ballast water treatment system because detection of living cells. In contrast, the CMFDA method, which is based on measuring cell esterase activity using a fluorimetric stain, was the best dye to detect live cells of almost all phytoplankton species, and staining efficiency was 70%. The CMFDA method is similar to the fluorescein diacetate (FDA) staining method. Therefore, we estimated viability of phytoplankton species using a double-staining method by combining CMFDA and FDA to determine optimum staining efficiency. As a result, the frequency of dying cells based on the double-staining method was 95%, which was significantly higher than that of single CMDFA staining. Our results suggest that a CMDFA + FDA assay is more effective to determine survival of marine plankton and that this method was applicable to investigate the efficacy of a ship's ballast water treatment system.

• Horticultural Science & Technology
• /
• v.28 no.3
• /
• pp.409-414
• /
• 2010

The first drainage time in a day was controlled for precise irrigation management with low consumption of nutrient solution in tomato perlite bag culture system by measuring water level of drained water in drainage catchment part. This method automatically adjusted the irrigation time under any condition of light, temperature and humidity, resulting in stable water content in substrates. However, it was difficult to keep the time consistent as they were set. It drained with the deviation of 20 min in the treatment in which the first drainage time was set at 10:00 and 50 min in the treatment set at 10:30. The first drainage time was not constant, but the drain occurred stably before noon in the treatment of which irrigation frequency was longer than 30 min. The drainage ratio was better balanced in all the treatments using drainage level sensors than the treatment using time clock for irrigation control. High water and fertilizer efficiencies were obtained. Although the growth, total yield and sugar content were not significantly different between the treatments, fruit weight was higher in the treatments using drainage level sensors than that using timer.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.31 no.3
• /
• pp.223-228
• /
• 2011

The present study was conducted to determine the optimum in vitro culture condition for callus induction and plant regeneration from mature seeds of bermudagrass (Cynodon dactylon cv. Common). It was revealed that mature seeds cultured on MS medium supplemented with 2 mg/L 2,4-D, 0.5 g/L proline, 0.5 g/L casamino acid and 3 g/L Gelrite under light condition produced the highest percentage of callus formation (39.2%). The most suitable medium for plant regeneration from dehydrated calli was MS agar medium supplemented with 0.5 mg/L 2,4-D, 2 mg/L BA, 0.5 g/L proline, 0.5 g/L casamino acid 3 g/L Gelrite which induced the highest percentage of calli forming shoots (57.7%). The frequency of callus induction and plant regeneration were the highest on sucrose, followed by maltose. The shoots were rooted at the highest rate (100%) when transferred onto 1/2 MS medium. Regenerated plants were morphologically uniform with normal growth pattern.

• Korean Journal of Community Nutrition
• /
• v.3 no.4
• /
• pp.574-582
• /
• 1998

This study was carried out to discover the effects of eating habits and health-related life style on blood pressure, $\gamma$-Glutamic acid Peptide Transferase($\gamma$-GPT), blood glucose and High Density Lipoprotein-Cholesterol(HDL-C). 185 subjects(85 male, 100 female) were selected, who were living in the Cheonju area aged 40#s to 60#s. The mean systollic blood pressure(SBP), diastollic blood pressure (DBP), $\gamma$-GPT, fasting blood sugar(FBS) and HDL-C for all the subjects were 118mmHg, 77mmHg, 281U/l, 90mg/dl and 45mg/dl, respectively. The SBP and DBP for subuects over 60 years old were 126mmHg and 81mmHg and were significantly higher than subjects in their 40#s and 50#s(p<0.001, p<0.005). The HDL-C of the group that rarely ate breakfast was 57mg/dl and that was significantly higher than the 44mg/dl scored by those who ate breakfast everyday(p<0.05). The SBP for subjects having a snack 2-3 times/week was 125mmHg and that was significantly higher than the 114mmHg of those having a snack everyday(p<0.05). The $\gamma$-GPT for subjects consuming alcohol everyday was 44IU/L and that was significantly higher than 18IU/I of the non-drinking group(p<0.001). The $\gamma$-GPT of light smokers was 53IU/I and that was significantly higher than the 22IU/I for non-smoking participants(p<0.001). The DBP, SBP, $\gamma$-GPT, FBS and HDL-C related to exercise not significantly different. The SBP(p<0.001) and DBP(p-0.01) between age group was positively correlated. The $\gamma$-GPT between drinking frequency(p<0.001), drinking quantity(p<0.05), and smoking(p<0.05) was also positively correlated. The FBS between exercises had a negative correlation(p<0.05), and the HDL-C between breakfast had a negative correlation(p<0.05). These results indicate that decreasing drinking and smoking, when combined with appropriate exercise, will decrease the $\gamma$-GPT and fasting blood sugar level, and help preventing adult diseases.

• Korean Journal of Plant Taxonomy
• /
• v.32 no.3
• /
• pp.257-292
• /
• 2002

Morphological characters of sections Foetidae(one taxon), Arenariae(one taxon) and Multiflorae(six taxa) of genus Carex(Cyperaceae) were reexamined. The epidermal patterns of perigynium, achene and leaf were investigated using by a scanning electron microscope(SEM) and a light microscope(LM). Morphological characters, such as length and width of stem, leaf, leaf sheath, bract, spike, scale, perigynium and beak of perigynium, length of spike peduncle, size and frequency of stomatal complex of leaf, number of bract, shape of stem transection, scale and apex of scale, beak and base of perigynuim, achene, epidermal cell and cell wall of perigynium, achene, leaf epidermal patterns(fundamental epidermal cell and cell wall, silica body, subsidiary cell), hair, papillae present/absent of perigynium, and leaf were useful for the identification of observed eight taxa. According to the current study, examined eight taxa of sections Foetidae, Arenariae and Multiflorae were distinct from each other with respect to length and width of stem, leaf, bract, perigynium, perigynium beak, length of spike peduncle, shape of bract, scale and apex of scale, perigynium, perigynium beak, hair presence/absence of perigynium and leaf. A key based on data was presented here.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1069-1077
• /
• 2008

The railway abrasion measurement system have to satisfy two conditions to increase the measurement accuracy as follows. The laser region which is projected on the rail have to be extracted without the geometrical distortion. The mapping of the acquired laser region data on the rail profile have to be processed exactly. But, the conventional railway abrasion measurement system is deeply effected by the foreign substance( dust, rainwater, and so on ) on the railway or the sensitive response characteristic of the laser to the external measurement circumstance, and then the measurement errors arise from above factors. When the laser region is projected on the rail extracts from the acquired image, the interference of the light with the same frequency as the laser system occurs the serious problems. In the process of the mapping between the railway profile and the extracted laser region, the measurement accuracy is very highly effected by the geometrical distortion and the abnormal variation. In this Paper, we propose the novel method to increase the accuracy of the railway abrasion measurement dramatically. we designed and manufactured the high precision and fast image processing board with DSP Core and FPGA to measure the railway abrasion. The image processing board has the capability that the image of 1024X1280 from camera can be processed with the speed of 480 frame/sec. And, we apply the image processing algorithm base on the wavelet to extract the laser region is projected on the rail exactly. Finally, we developed high precision railway abrasion measurement system with the error range less than +/-0.5mm by which 2D image data is covered 3D data and mapped on the rail profile using the camera model and the perspective transform.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.34 no.6
• /
• pp.495-504
• /
• 2021

Energy Harvesting is a technology that can convert wasted energy such as vibration, heat, light, electromagnetic energy, etc. into usable electrical energy. Among them, vibration-based piezoelectric energy harvesting (PEH) has high energy conversion efficiency with a small volume; thus, it is expected to be used in various autonomous powering devices, such as implantable medical devices, wearable devices, and energy harvesting from road or automobiles. In this study, wasted vibration energy in an automobile is converted into electrical energy by high-power piezoelectric materials, and the generated electrical energy is found to be an auxiliary power source for the operation of wireless sensor nodes, LEDs, etc. inside an automobile. In order to properly install the PEH in an automobile, vibration characteristics includes frequency and amplitude at several positions in the automobile is monitored initially and the cantilever structured PEH was designed accordingly. The harvesting properties of fabricated PEH is characterized and installed into the engine part of the automobile, where the vibration amplitude is stable and strong. The feasibility of PEH is confirmed by operating electric components (LEDs) that can be used in practice.