• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.353-356
• /
• 2002

Planar laser induced fluorescence(PLIF) has been widely used to obtain two dimensional fuel distribution. Preliminary investigation was performed to measure quantitative air excess ratio distribution in an engine fueled with LPG. It is known that fluorescence signal from acetone as a fluorescent tracer is less sensitive to oxygen quenching than other dopants. Acetone was excited by KrF excimer laser (248nm) and its fluorescence image was acquired by ICCD camera with a cut-of filter to suppress Mie scattering from the laser light. For the purpose of quantifying PLIF signal, an image processing method including the correction of laser sheet beam profile was suggested. Raw images were divided by each intensity of laser energy and profile of laser sheet beam. Inhomogeneous fluorescence images scaled with the reference data, which was taken by a calibration process, were converted to air excess ratio distribution. This investigation showed instantaneous quantitative measurement of planar air excess ratio distribution for gaseous fuel.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.5
• /
• pp.814-823
• /
• 2012

Fluctuation of light intensity from the keyhole becomes more significant in full penetration welding than partial penetration welding, since the plasma produced in the keyhole can escape from the rear side of the keyhole. The plasma optical radiation emitted during Nd:YAG laser welding of S45C steel samples has been detected with a Photodiode and analyzed under different process conditions. As the results, the BOP was performed for welding, behavior of plasma, spatter or plume was monitored to determine the reference signal. Then, random combination was made for comparison with the reference signal, which aimed at verifying reliability of the welding monitoring system that this study intended to develop.

• Journal of the Korean Vacuum Society
• /
• v.12 no.S1
• /
• pp.33-35
• /
• 2003

The electrooptic properties of the reflected light in a reflective mode, $45^{\circ}C$twisted nematic liquid crystal (TNLC) cell were investigated in the voltage regions near and away from the Freedericksz transition threshold. The measured reflectivity away from the threshold voltage ($V_th$) could not be described by the model which assurnes a constant tilt angle as well as a linearized distribution of twist angle across the cell, although the data are well fitted near $V_th$. We found that in the voltage region away from $V_th$, the model considering the distributions of the tilt angle and the twist angle should be applied for the calculation of the reflectivity. The director-axis distributions were obtained from the numerical integration of the Euler-Lagrange equation.

• Publications of The Korean Astronomical Society
• /
• v.8 no.1
• /
• pp.67-82
• /
• 1993

We developed a real-time CCD photometric program for IBM PC compatibles. This program can perform several functions necessary for CCD photometry such as telescope control. filter rotation, CCD camera control and data acquisition, two-dimensional image processing, simple aperture photometry and automatic differential photometry. The image processing of a spiral galaxy M51 observed with the SNU 61cm reflector shows a well developed spiral structure. Simple aperture photometric results of 14 stars in open cluster NGC 6871 almost accorded with those from IRAF/APPHOT. And we could confirm the light variation of eclipsing binary EM Cep by simultaneous automatic differential photometry of 7stars in NGC 7160. Due to the excellence in the precision and efficiency of automatic differential photometry using CCD. this program is very useful for the study of small amplitude ${\delta}$ Sct type variables and of the photometric stability of B ${\sim}$ F type stars.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.7 no.1
• /
• pp.33-39
• /
• 2012

In this paper, we propose robot control interface using gaze recognition which is not limited by head motion. Most of the existing gaze recognition methods are working well only if the head is fixed. Furthermore the methods require a correction process per each person. The interface in this paper uses a camera with built-in infrared filter and 2 LED light sources to see what direction the pupils turn to and can send command codes to control the system, thus it doesn't need any correction process per each person. The experimental results showed that the proposed interface can control the system exactly by recognizing user's gaze direction.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.131-135
• /
• 2003

WDM(Wavelength division multiplexing) light wave communication system requires MUX/DeMUX and optical filter OADM can be used to extract and add the specific wavelength channel from the transmission line. In this paper, we propose the OADM based on MZI and cascade FBG. It is able to minimize system and reduce sidelobe. So, we have considered MZI structure and 3dB coupler. Using the coupled mode theory. We also analyze out characteristics of OADM and experiment. From results obtained by experiment and computer. Simulation, the proposed OADM with cascade FBG works well. we hope that the obtained result in this paper con be used as the data to design the OADM with cascade FBG.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.4
• /
• pp.11-18
• /
• 2007

A moving object detection algorithm for surveillance video is here proposed which employs background initialization based on two-stage median filtering and a background updating method based on state transition diagram. In the background initialization, the spatiotemporal similarity is measured in the subinterval. From the accumulated difference between the base frame and the other frames in a subinterval, the regions affected by moving objects are located. The median is applied over the subsequence in the subinterval in which regions share similarity. The outputs from each subinterval are filtered by a two-stage median filter. The background of every frame is updated by the suggested state transition diagram The object is detected by the difference between the current frame and the updated background. The proposed method showed good results even for busy, crowded sequences which included moving objects from the first frame.

• Journal of Microbiology and Biotechnology
• /
• v.8 no.3
• /
• pp.208-213
• /
• 1998

The effect of the addition of wheat bran to the growth medium on the production of cellulolytic enzymes of Trichoderma reesei Rut C30 was studied in batch culture using shake flasks. The activity of cellulase was enhanced by the addition of wheat bran to the cellulase production medium. $KH_2PO_4$-$K_2HPO_4$ buffer was used for pH control during cellulase production. As a result, high cellulase activities were obtained in shake flask culture; a CMC (carboxymethyl cellulose) activity of 125.78 U/ml was obtained from 2% Avicel- and 3% wheat bran-containing medium and an FP (filter paper) activity of 12.85U/ml was obtained from 1% Avicel- and 5% wheat bran-containing medium after 6 days of cultivation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.113-117
• /
• 2003

In this paper, have necessity of PACS (Picture Archiving and Communication System) at hospital but hereafter by economical problem PACS apply this to medical treatment image enhancing image quality applying histogram equalization for improvement of light and darkness after reconstruct because make image that pretreatment filtering has wild picture and is processed in wave lets dissolution and wave lets area using weight median filter because could not buy expensive equipment at hospital which introduction is difficulty do inversion and extracted characteristic.

• Journal of information and communication convergence engineering
• /
• v.7 no.3
• /
• pp.281-285
• /
• 2009

Mobile robot has various sensors for describing the external world. The ultrasonic sensor widely applied to the most mobile robot to detect the obstacle and environment owing to low cost, its easy to use. However, ultrasonic sensor has major problems: the uncertainty information of sensor, false readings caused by specular reflection, multi path effect, low angular resolution and sensitivity to changes in temperature and humidity. This paper describes a sensor system for map building of mobile robot. It was made of low cost PSD (Position Sensitive Detector) sensor array and high speed RISC MPU. PSD sensor is cost effective and light weighting but its output signal has many noises. We propose heuristic S/W filter to effectively remove these noises. The developed map building sensor system was equipped on a mobile robot and was compared with ultrasonic sensor through field test.