• Korean Journal of Digital Imaging in Medicine
• /
• v.12 no.2
• /
• pp.71-79
• /
• 2010

Thanks to the great development of technology in radiation, we are now able to reduce radiation exposure to the patients, and the radiographer and expenses in medical sector. We are also trying to produce ideal images which maintain useful information. These kinds of effort are increasing over the world. For that reason, we should get images which include necessary data of patients. Then it also can help to reduce radiation exposure to the patients. Therefore, we need to know the problems that cause a falling off in image's quality and check on generator in case of their electronic and mechanical errors. And moreover, we should anticipate the possibility of devices errors and prevent them with regular quality control. This investigation was conducted in medical institutions, institute of educations and hospitals. They are all in Seongnam-City. We used PMX-III, kVp meter to implement kVp test, mR / mAs output test, light fiel / beam alignment test, Reproducibility of exposure dose, half value layer test, reproducibility of exposure time test. in the case of hospitals, they perceive the importance of regular quality control and organize the regular quality control team so they can be satisfied with the error standard in most experiments. On the other hand, when it comes to medical institutions and institute of educations, they perceive the importance of regular quality control less than hospitals do. Radiographer need to understand the importance of regular quality control and practice it so they can get the fine ideal image with the lower dose to the patient.

• ETRI Journal
• /
• v.34 no.1
• /
• pp.138-141
• /
• 2012

This letter proposes a real-time digital image stabilization system for cell phone cameras without the need for frame memory. The system post-processes an image captured with a safe shutter speed using an adaptive denoising filter and a global color correction algorithm. This system can transfer the normal brightness of an image previewed under long exposure to the captured image making it bright and crisp with low noise. It is even possible to take photos in low-light conditions. By not needing frame memory, the approach is feasible for integration into the size-constrained image sensors of cell phone cameras.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.12
• /
• pp.1702-1707
• /
• 2002

The effects of dark-control (D) and continuous green light (GL) exposure of incubated meat-type breeder eggs (Hybro) on embryonic growth from 5 to 15 days of age, hatching time, hatchability per cent and chick hatching weight were investigated in three consecutive experiments at 33, 38, and 41 weeks of age. A total of 798 eggs were used in this study. Eggs were set in an incubator on trays either in the D or under two tubes of 20-watt green fluorescent light during the first 18 days of incubation. Eggs from both treatments were transferred to the dark hatching compartment at 19 days of incubation. The light intensity was in the range of 1,340 to 1,730 lux at the surface of the eggs. GL incubation of eggs significantly (p<0.01) increased weight (expressed as an absolute value) and daily weight gain of embryos at 11 and continued to 15 days of age, hatchability per cent by 4.8%, reduced dead embryos per cent and chick weight at hatch by 37 and 2%, respectively and accelerated hatching time by about 24 h when compared with the D-control incubation. Chicks hatched at 504 h of incubation had significantly (p<0.01) higher body weight, expressed as an absolute value or as a percentage of egg weight, than those hatched earlier at 456 h of incubation. It was concluded that the GL incubation of meat breeder eggs reduced incubation period and chick weight at hatch and increased embryonic growth and hatchability per cent.

• Journal of the Korea Computer Graphics Society
• /
• v.27 no.3
• /
• pp.1-11
• /
• 2021

Slow sync is a photography technique where a user takes an image with long exposure and a camera flash to enlighten the foreground and background. Unlike short exposure with flash and long exposure without flash, slow sync guarantees the bright foreground and background in the dim environment. However, taking a slow sync image with a smartphone is difficult because the smartphone camera has continuous and weak flash and can not turn on flash if the exposure time is long. This paper proposes a deep learning method that input is a short exposure flash image and output is a slow sync image. We present a deep learning network with a weight map for spatially varying enlightenment. We also propose a dataset that consists of smartphone short exposure flash images and slow sync images for supervised learning. We utilize the linearity of a RAW image to synthesize a slow sync image from short exposure flash and long exposure no-flash images. Experimental results show that our method trained with our dataset synthesizes slow sync images effectively.

• Journal of the Korean Chemical Society
• /
• v.8 no.4
• /
• pp.142-146
• /
• 1964

The author proposed an equation of fading rate, expressed as ${\Delta}E$=${\Delta}E_{1{\infty}}({{1-e^{-k}}_1}^t)+k_2t$, where ${\Delta}E$=fading of dye (colour difference of N.B.S. unit), ${\Delta}E_{1{\infty}}$=extremity value of fading of molecularly dispersed dye, $k_1$, $k_2$=constants, t=exposure (hours). The validity of above equation, which is connected with the state of dye in fibre, was confirmed by experimental in a range of 2-3 colour fading in grey scale value for assessing change in colour visually, except the case of increasing the fading rate with the time resulted from the break-down of dye particles through the heat effect of light; it was also discussed about possiblity of evaluating of fastness to light of dye in early stage.

• Journal of Applied Reliability
• /
• v.15 no.4
• /
• pp.270-275
• /
• 2015

Purpose : UHMWPE (Ultra-high-molecular-weight-polyethylene) is one of the most widely used material in knife protection clothes because of high strength, elasticity, and light weight. The purpose of this study is to develop the accelerated life test method and predict the lifetime for the knife protection fabric composed by UHMWPE. Methods : In this study, degradation characteristics of UHMWPE fibers and knife protection fabric for cut resistance were evaluated under the hydrolysis and photo-degradation conditions. It was found out that the degradation rate of retained tensile strength was more significant in the photo-degradation than hydrolysis. Therefore, the failure time was determined as the time that the retained tensile strength in photo-degradation is less than 50%. Considering an acceleration factor for irradiance and exposure time, the lifetime was predicted from the calculated failure time. Results : As a result of the accelerated life test, the $B_{10}$ lifetime of knife protection fabric composed by UHMWPE fibers is estimated as 2.8 years for a 90% statistical confidence level. Conclusion: Since the lifetime is predicted by the view-point of radiant exposure in this study, there is a possibility that the estimated lifetime may differ from the actual lifetime. However, it is considered as an useful methodology to estimate the long-term lifetime of knife protection fabrics.

• Composites Research
• /
• v.27 no.6
• /
• pp.236-241
• /
• 2014

This paper aims to evaluate material property variation of polymer concretes under ultra-violet exposure condition. The components and mixing ratio of the polymer composite specimens were determined by the previous research results. The equivalent UV exposure time was calculated with the consideration of the power of metal halide lamp and maximum 3 years were selected for the experiments. From the tests, it was found that the generated heat during UV exposure affected much the material properties of polymer concrete by means of post cure. As a result, the compressive strength increased and ductility factor decreased.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.44 no.4
• /
• pp.265-272
• /
• 2008

Biodegradable polybutylene succinate(PBS) is an environment friendly plastics for fisheries, because it can mitigate the ghost fishing problem caused by gill-net and trap fisheries. To evaluate photodegradability of PBS monofilament in comparison with polyamide(PA) and polyethylene(PE) monofilament, these 3 types of monofilaments were spun and exposed to ultraviolet light(UV) of weather-ometer for 900 hours, and then their modification, crystal structure, strength, and extensibility were analysed. PBS monofilament did not show any crack and maintained its crystal structure after 900 hour exposure to UV whereas PE monofilament began showing cracks and structure modification after 600 hour exposure. Under UV exposure, the strength and extensibility decreased more rapidly in PBS than in PA and PE. We estimate that gill nets made of PBS monofilament can endure for about 1 year. The breaking strength and elongation decreased linearly with the exposure time for the 3 types of monofilaments. The derived regression equations of the residual tenacity(RT, kg/$mm^2$) and the residual extensibility(RE, %) with the exposure time in year(Y) for each monofilament were; PBS : RT=48.598 - 8.6437Y($R^2=0.93$), RE=28.165 - 7.3233Y($R^2=0.98$), P A : RT=59.771 - 8.6437Y($R^2=0.98$), RE=32.198 - 5.2772Y($R^2=0.92$), P E : RT=60.898 - 5.6528Y($R^2=0.98$), RE=11.887 - 0.7188Y($R^2=0.98$).

• Journal of Environmental Health Sciences
• /
• v.45 no.5
• /
• pp.405-425
• /
• 2019

Objective: This study aimed to review the methodologies for evaluation of consumer spray products containing engineered nanomaterials (ENM), particularly focusing on inhalation exposure. Method: Literature on the evaluation methods for aerosolized ENM exposure from consumer spray products were collected through academic web searching. Common methodologies used in the literature, including research reports and academic articles, were also introduced. Results: The number of ENM-containing products have shown a considerable increase over recent years, from 54 in 2005 to 1,827 in 2018. Currently there is still discussion over the existing regulations with regard to product safety. Analysis of both ENM suspensions in the products and their aerosols is important for risk assessment. Comparison between the phases suggests how the size and concentration of particles change during the spray process. To analyze the ENM suspensions, dynamic light scattering, electron microscopy techniques, and inductively coupled plasma with mass spectrometry were used. In the aerosol monitoring, direct-reading instruments have been used to monitor the aerosols and conventional active sampling is used together to supplement the lack of real-time monitoring. There are also some models for estimating inhalation exposure. These models may be used to estimate mass exposure to nanomaterials contained in consumer products. Conclusion: Although there is no standardized method to evaluate ENM exposure from consumer products, many concerns about ENM have emerged. Every potential measure to reduce exposure to ENM from spray product use should be implemented through a precautionary recognition.

• Publications of The Korean Astronomical Society
• /
• v.18 no.1
• /
• pp.75-79
• /
• 2003

The characteristics of the BOES (Bohyunsan Observatory Echelle Spectrograph) CCD camera is presented. In order to get optimum gain and readout noise of the CCD, we examine the variation of the gain and readout noise by changing the value of output drain voltage of the CCD and measuring the gain using transfer curve, which is defined as the plot of variance versus mean exposure level of a homogeneous light onto the CCD surface. The gain and readout noises are optimised to be 0.5e$^-$/ADU and 3e$^-$, which is good for highest signal-to-noise ratio and contrast for the low light level characteristics of the BOES. We also measure the dark count of the CCD by getting five dark images with 3600 seconds exposure time. The mean dark count from median stacked dark images is essentially zero. A table of positions of defected pixels is also presented.