• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.216-219
• /
• 2005

In recent, LCD becomes one of the main display devices and expected to have quite good market share during the next couple of years. The demand for low cost and high performance, however, is becoming severe as the competition among other display devices like PDP, OLED increases. To satisfy this demand from market, we need to optimize the parts or modules of the LCD, reduce the number of the assemble and enhance the process for the high brightness and uniformity of the LCD. The LCD consists mainly of LCD panel and Backlight unit(BLU). BLU, which takes big portion of the cost for LCD, consists of light source, light guide panel and many kinds of functional film. Recently light guide panel or film for BLU has micro patterns on its surface and consequently to reduce the number of parts and enhace the brightness and its uniformity. In this study, some methodologies for the fabrication of the master/stamper and molding the light quide panel are introduced for 50um pitch of prizm patterned substrate. Mechanical machining process is adapted and optimized to fabricate micro patterned stamper using the micro cutting tool. Injection molding technology is also developed to obtain uniformly replicated micro patterned products.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2004년도 제29회 KOSCI SYMPOSIUM 논문집
• /
• pp.217-222
• /
• 2004

In recent year, as the current and future emission regulations go stringent, the research of exhaust manifold and CCC has become the subject of increasing interest and attention. This study is concerned with the systematic approach to improve catalyst flow uniformity and light-off behavior through the basic understanding of exhaust flow characteristics. Computational approach to the unsteady compressible flow for exhaust manifold of 4-1 type and 4-2-1 type and CCC system of a 4-cylinder DOHC gasoline engine was performed to investigate the flow distribution of exhaust gases. In this study, through calculation, the effects of geometric configuration of exhaust manifold on flow structure and its maldistribution in monolith were mainly investigated to understand the exhaust flow patterns in terms of flow uniformity. Based on the design guidance resulting from this fundamental study, the flow uniformity of 4-2-1 type exhaust manifold demonstrated the more improved exhaust characteristics than that of the 4-1 type one.

• 조명전기설비학회논문지
• /
• 제17권6호
• /
• pp.16-22
• /
• 2003

본 연구는 워크스테이션에서 조명방식에 따른 시환경평가를 목적으로 하고 있다. 성능평가를 위해 Radiance 프로그램을 통한 시뮬레이션과 Mock-up실 (15.0${\times}$11.6${\times}$3m)에서의 간접조명 실험을 통하여 사무소 건물의 조명방식에 따른 성능평가자료를 제시하고자 하였다. 본 연구의 결과는 다음과 같다 :1) 대상공간에서 작업면 조도를 살펴보면 첫째, 모든 반사율에서 파티션이 높아질수록 조도비는 낮은 값을 보였다. 둘째, 직접 양측배치방식에서 가장 높은 조도비를 보였으며 직접 중앙배치방식에서 가장 낮은 조도비를 나타냈다. 셋째, 간접조명방식에서 조명의 배치에 대한 영향도가 직접조명방식보다 50% 정도 낮게 나타났다. 2) 대상공간에서 균제도를 평가할 때 첫째, 모든 반사율에 대하여 조도비와 마찬가지로 파티션이 높아지면 균제도는 낮아졌다, 둘째, 간접 양측배치방식에서 가장 높은 균제도를 보였으며 직접 중앙배치방식에서 가장 낮은 균제도를 나타내었다. 셋째, 조명배치에 따른 균제도 범위를 보면 직접조명방식에서 22.5%, 간접조명 방식에서 11.5%의 차를 보여 간접조명방식의 경우 조명배열에 대한 영향도가 적음을 알 수 있었다.

• 조명전기설비학회논문지
• /
• 제26권4호
• /
• pp.6-13
• /
• 2012

In this paper, we took an indirect reflectance type that irradiates light from an LED module, which reflects light from a reflector onto the road. This LED pedestrian lighting design produces minimal glare from a relatively simple structure. Using LightTools 7.2, we conducted a study on the varying shape and curvature of the reflector. In order to further investigate this data, we researched the ratio of the DLOR and ULOR, the average illuminance, and the uniformity of the illumination. Based on this research, we selected optimum conditions to realize the actual LED pedestrian lighting using RELUX software. We found the average illuminance value to be 22[1x] and the illuminance uniformity ratio to be 0.23, which met the criteria of the proposed standards set in KS C 7658. In addition, it also satisfied the criteria of the standards set in KS A 3701 by having TI (Threshold Increment) at 7[%].

• 대한기계학회논문집B
• /
• 제23권7호
• /
• pp.841-855
• /
• 1999

In the present work, the effect of a flow maldistribution on the thermal and conversion response of 8 monolith catalytic converter is Investigated. To achieve this goal, a combined chemical reaction and multi-dimensional fluid dynamic mathematical model has been developed. The present results show that flow uniformity within the monolith brick has 8 great impact on light-off performance of the catalytic converter. In the case of lower flow uniformity, large portions of the monolith remain cold due to locally concentrated high velocities and CO, HC are unconverted during warm-up period, which loads to retardation of light-off. It has been also found that the heat-up pattern of the monolith ill similar to the flow distribution profile, In the early stage of the reaction. It may be concluded that flow maldistribution can cause a significant retardation of the light-off and hence can eventually worsen tho conversion efficiency of automotive catalytic converter.

• 한국표면공학회지
• /
• 제49권2호
• /
• pp.178-185
• /
• 2016

In this study, we have fabricated light guide plates (LGPs) in thin film form for edge type back light unit (BLU) by using UV imprint lithography. In the LGPs, the pattern of functional resins on PC and PMMA substrates were successfully transferred from original master mold through PVC stamp. Optimized pattern arrays with slowly-sloped density were designed to obtain high brightness and uniformity. We could obtain a relatively improved brightness of $950cd/m^2$ and a uniformity of 87.3% by using the NP-S20 functional resins at an input power of 1.3 W because NP-S20 resin could show high formability after UV hardening process. The LGP prepared on polymethylmethacrylate (PMMA) substrate exhibited higher brightness than that on polycarbonate (PC) substrate because PMMA has lower refractive index resulting in more refraction toward the vertical direction.

• Journal of the Optical Society of Korea
• /
• 제18권6호
• /
• pp.663-671
• /
• 2014

LED lamp arrangement is a critical issue in indoor visible light communication (VLC) system. In this paper, we analyze the illumination distribution under the arrangement of $2{\times}3$ and propose a method to find the optimal lamp arrangement. The method, based on the MIMO (Multiple Input/Multiple Output) system model and taking the first order reflection into consideration, enables accurate analysis of the arrangement of the LED lamps for any room. The studies show that under the optimal arrangement the uniformity of illumination is improved from 0.55 to 0.86, which guarantees that users can get almost equal lighting effects, no matter where they locate themselves. At the same time, the RMS delay spread distribution which is used to evaluate the inter-signal-interference (ISI) is analyzed, and the simulation results indicate that the optimal arrangement also can improve the communication quality by reducing the fluctuation of the RMS delay spread.

• Transactions on Electrical and Electronic Materials
• /
• 제13권1호
• /
• pp.16-18
• /
• 2012

LED lighting systems that combine lighting capability, emotional and physiological characteristics are required for lighting source and multifunctional applications. In this work, Simulation studies using optical analysis software packages, Light Tools, are presented. This is done to estimate the uniformity ratio of illuminance and photosynthetic photon flux density (PPFD) of the periodic 2D lattice arrangements, such as square, diamond, two-way bias quadrangular, hexagonal, and Kagome lattices, under the same transmissivity, absorptance and reflectivity. It has been found out that the two-dimensional Kagome lattice arrangement exhibited high uniformity ratio of illuminance and PPFD compared to other lattices. Accordingly, these results can be used to guide a design and improve the lighting environment which in turn would maximize the uniform distributions of illuminance.

• Journal of Mechanical Science and Technology
• /
• 제19권6호
• /
• pp.1329-1337
• /
• 2005

The OLED (Organic Light Emitting Diodes) display recently used for the information indicating device has many advantages over the LCD (Liquid Crystal Display), and its demand will be increased highly. The linear cell should be designed carefully considering the uniformity of thin film on the substrate. Its design needs to compute the temperature field analytically because the uniformity for the thin film thickness depends on the temperature distribution of the source (organic material). In the present study, the design of the linear cell will be modified or improved on the basis of the temperature profiles obtained for the simplified linear cell. The temperature distributions are numerically calculated through the STAR-CD program, and the grids are generated by means of the ICEM CFD program. As the results of the simplified linear cell, the temperature deviation was shown in the parabolic form among the both ends and the center of the source. In order to reduce the temperature deviation, the configuration of the rectangular ends of the crucible was modified to the circular type. In consequence, the uniform temperature is maintained in the range of about 90 percent length of the source. It is expected that the present methods and results on the temperature analysis can be very useful to manufacture the vapor deposition device.

• 전자공학회논문지
• /
• 제53권11호
• /
• pp.48-55
• /
• 2016

노트북, 테블릿 PC 및 스마트폰 등의 휴대 기기를 위한 디스플레이의 전력소모를 낮추기 위해, 주변 밝기에 따라서 디스플레이의 밝기를 조정할 수 있는 광 센서 시스템을 연구하였다. 또한, 휴대 기기의 복잡도와 비용에 크게 영향을 주지 않도록, 광 센서 시스템을 디스플레이 패널에 일체형으로 구현하고자 했으며, 이를 위해서 저온 다결정 실리콘 박막트렌지스터를 이용하여 패널에 광 센서와 신호취득 회로를 집적하고자 했다. 주변 밝기를 감지하는 광 센서의 패널 간 편차를 별도의 공정 설비없이 신뢰성 있게 보정할 수 있도록, 새로운 보정 방식을 제안하였다. 이와 더불어 최종 데이터를 디지털화하기 위한 아날로그-디지털 변환기를 포함한 신호취득 회로를 제안하고 검증하였다. 제안하는 회로는 집적하기에 적합하도록 간단한 구동 신호로 동작되며, 인식 가능한 입력 밝기는 10에서 10,000 lux까지이다. 제안하는 신호취득 회로의 신호취득 주파수는 100Hz이며, 20개의 출력 레벨에 대한 최대 차등 불균일 오차는 0.5 LSB 이하이다.