• Journal of Sensor Science and Technology
• /
• v.25 no.2
• /
• pp.131-137
• /
• 2016

In this study, a multilevel visible light communication (VLC) system based on resistor ladder circuit is designed to transmit medical data. VLC technology is being considered as an alternative wireless communication due to various advantages such as ubiquity, license free operation, low energy consumption, and no radio frequency (RF) radiation characteristics. With VLC even in places where traditional RF communication (e.g., Wi-Fi) is forbidden, significant bio-medical signal including the electrocardiography (ECG) and photoplethysmography (PPG) data can be transmitted. More lives could be saved anywhere by this potential advantage of VLC with a fast emergency response time. A multilevel transmission scheme is adopted to improve the data capacity with keeping simplicity, where data transmission rate can increase by log2m times (m is the number of voltage levels) than that of conventional VLC transmission based on on/off keying. In order to generate multi-amplitudes, resistor ladder circuit, which is a basic principle of digital to analog convertor, is employed, and information is transferred through LED (Light-Emitting Diode) with different voltage level. In the receiver side, multilevel signal is detected by optical receiver including a photo diode. Then, the collected data are analyzed to serve the necessary medical care to the concerned patient.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.5
• /
• pp.996-1000
• /
• 2010

In order to apply VLC (visible light communication) in harsh environment of nuclear power plant in-containment building, the high luminance LEDs, which are key components of the VLC system, have been gamma irradiated at the dose rate of 4 kGy/h during 72 hours up to a total dose of 288 kGy. The radiation induced coloration effect in the high luminance LED bulb made of acryl or plastic material was observed. In the VLC wireless data transmission experiment using the high luminance LEDs irradiated by high dose rate gamma-ray, the radiation induced coloration effect of the high luminance LED bulb extended the communication distance compared to non-irradiated LEDs.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.480-483
• /
• 2018

In this paper, we study the interference canceling and image sensing processing technology of multiple light sources for high speed transmission in CMOS sensor based visible light communication system. To improve transmission capacity in optical camera communications via image sensors, different data must be transmitted simultaneously from each LED. However, multiple LED light source environments for high-speed transmission can cause interference between adjacent LEDs. In this case, since the visible light communication system generally uses intensity modulation, when a plurality of LEDs transmit data at the same time, it is difficult to accurately detect the respective LEDs due to the light scattering interference of the adjacent LEDs. In order to solve this problem, the ON / OFF state of many LEDs of the light source is accurately recognized by using a dual CMOS sensor, and the spectral estimation technique and the pixel image signal processing technique of each LED are proposed. This technique can accurately recognize multiple LED pixels and improve the total average bit error rate and throughput of a MISO-VLC system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.8B
• /
• pp.706-711
• /
• 2012

The current visible light communication (VLC) systems have a short transmission distance and a low data rate. To overcome this, we studied on the method of appling MIMO technology to VLC. However, it is difficult to apply the original MIMO technology used in RF frequency to wireless VLC. In VLC system, a lens can be used to separate the transmitted signals. And, if we use an image sensor as the receiver, MIMO technology can be applied to LED wireless visible light communication. In this paper, we report an experiment of $2{\times}2$ LED wireless visible light communication using a commercial image sensor receiver. We show the experimental demonstration with a transmission length of 10.5 m and a data rate of 200 bit/s.

• Applied Chemistry for Engineering
• /
• v.29 no.4
• /
• pp.484-487
• /
• 2018

In this paper, the optical and electrical properties of ytterbium films were studied for water vapor transmission rate (WVTR) analysis of encapsulation films used in organic electronic devices. Ytterbium thin films show a wide range of light transmittance (70-10%) and resistivity ($6.0-0.16m{\Omega}{\cdot}cm$) depending on various film thicknesses (20-100 nm). The Yb thin films were oxidized with moisture and its transmittance and resistance changed in real time. As a result, the WVTR of parylene and aluminum nitride (AlN) laminated thin encapsulation film was measured to be $4.3{\times}10^{-3}g/m^2{\cdot}day$ with the 25 nm thick ytterbium thin film.

• Journal of the Optical Society of Korea
• /
• v.20 no.2
• /
• pp.276-282
• /
• 2016

A 2 Gbit/s visible-light communication (VLC) scheme using time-frequency color-clustered (TFCC) multiple-input multiple-output (MIMO) based on blue, cyan, yellow, and red (BCYR) light-emitting diodes (LEDs) is presented. In the proposed scheme, BCYR LEDs are employed to form four different color clusters. Data transmission using the four color clusters is performed in MIMO, so that the scheme achieves a very high speed of data transmission. Moreover, the scheme employs the TFCC strategy to yield high performance in terms of bit error rate (BER). TFCC operates in such a way that the original data and the two delayed versions of the data are multiplied by orthogonal frequencies and then transmitted using a specific color of the BCYR LED. In the receiver, color filters are employed to detect the data transmitted from the desired cluster. Selection combining (SC) is also performed to yield a diversity effect within each color cluster, to further improve the performance. Performance evaluation demonstrates that the proposed TFCC MIMO VLC offers a data rate of 2 Gbit/s and a bit error rate of 4×10^-5, at an E_b/N_o value of merely 3 dB.

• Journal of IKEEE
• /
• v.13 no.4
• /
• pp.70-74
• /
• 2009

In this paper, We propose the visible light communication(VLC) link based on white light emitting diode (LED) and Photo detector(PD). The proposed architecture is demonstrated experimentally and its performance is verified through the experimental results of quality-factor(Q-factor) and eye pattern of 10Mb/s PRBS signal. The ambient light effect from a typical type fluorescent lamp source was also analyzed. when the distance between the LED and the PD is about 1m, error free wireless transmission of the LED was achieved up to 10Mb/s data rate. Under the condition with ambient light, low BER, data transmission of the VLC link is achieved up to 5Mb/s data rate at 1m. Also, when the PD is placed away from the center, low BER data transmission of the VLC link is achieved up to 1Mb/s at 10cm and 10Mb/s at 5cm.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.10
• /
• pp.1-8
• /
• 2013

Wireless Visible Light Communication is the technology that enables communication using LED illumination Infrastructure instead of existing illumination such as incandescent lamp or fluorescent light. Because VLC uses light for communication, it has no problem of frequency permission and is harmless to human body. It is also possible to check the communication through eye. So VLC can be used as a supplement to the Radio Frequency communication, Infrared in indoor environment. So far, researchers on the LED Visible light communication have focused on the increasing transmission speed, transmission distance, modulation method. However, there is few research of main factors that influence on system performance. System performance has been mainly predicted through simulation. In this paper, I recognized that these factors such as outside light noise, obstacle, LED panel position or emitted angle have a great impact on wireless communication system. So I experimented VLC system by changing distance and position to discover location suitable for BER regulation.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.1
• /
• pp.95-101
• /
• 2022

This paper proposes a method to process the shape of an optical transmission road and attempts to determine the most suitable single processing method for an acrylic plate optical transmission road. In addition, by manufacturing an automatic pattern processing device to generate certain shapes on the acrylic plate at regular intervals, and measuring the illuminance of the patterned acrylic plate optical transmission road, the measured illuminance was confirmed to fall under the KS illuminance values presented in Table 1. In conclusion, when an incident light of approximately 20,000 lx is applied, the transmission illumination is approximately 200 lx, which represents a transmission rate of approximately 1% for incident light and corresponds to the KS illumination criterion F. Additionally, the right-angle triangular pyramid base size (A) processed at a temperature of 350 ℃ for one second was 2 mm, exhibiting the largest transmission illumination of 280 lx. When the transparent acrylic plate was set to a constant size of 1.6 mm at the bottom of the right-angle triangular pyramid, the fastest response occurred at a processing tip temperature of 350 ℃ (0.04 s). On the other hand, it took 10 s to process the size of the bottom of the right-angled triangular pyramid at a temperature of 200 ℃ to 1.6 mm, and it was confirmed that the optical transmission efficiency was significantly reduced because of the burr that occurred at this time.

• Journal of Korea Multimedia Society
• /
• v.22 no.2
• /
• pp.186-193
• /
• 2019

Visible light communication technology is being studied and developed in various ways due to advantages such as high transmission speed, excellent positioning and higher security. However, existing visible light communication systems have difficulties in entering the market because they use special transmitters and receivers. We will overcome the difficulty if we develope a VLC system that uses a conventional LED light as a transmitter and a smartphone camera as a receiver. What matters is that LED lights include a scatter filter to prevent glareness for human eyes, but the existing VLC(Visual Light Communication) method can not be applied. In this paper, we propose a method to encode data with On / Off patterns of LEDs in the lighting with $M{\times}N$ LEDs. We defined parameters like L-off-able and K-seperated to facilitate the recognition of On / Off patterns in the diffused Lights. We conducted experiments using an LED lighting and smart phones to determine the parameter values. Also, the maximum transmission rate of our encoding technique is mathematically presented. Our encoding scheme can be applied to indoor and outdoor positioning applications or settlement of commercial transactions.