• Journal of the Korean Society for Precision Engineering
• /
• 제29권12호
• /
• pp.1285-1289
• /
• 2012

This study has been focused on application of ELID lapping process for mirror-surface machining of sapphire wafer. Sapphire wafer is a superior material with optic properties of high performance as light transmission, thermal conductivity, hardness and so on. High effective surface machining technology is necessary to use sapphire as various usages. The interval ELID lapping process has been set up for lapping of the sapphire material. According to the ELID lapping experimental results, it shows that 12.5 kg of load for lapping is most pertinent to ELID lapping. the surface of sapphire can be eliminated by metal bonded wheel with micron abrasives and the surface roughness of 60 nmRa can be gotten using grinding wheel of 2,000 mesh in 4.5 um, depth of cut. In this study, the chemical experiments after ELID grinding also has been conducted to check chemical reaction between workpiece and grinding wheel on ELID grinding process. It shows that the chemical reaction has not happened as the results of the chemical experiments.

• Journal of the Institute of Electronics and Information Engineers
• /
• 제51권8호
• /
• pp.51-57
• /
• 2014

In this paper, we propose a novel method to effectively eliminate flickering artifacts caused by dehazing in video sequences. When applying a dehazing technique directly to each image in a video sequence, flicker artifacts may occur because atmospheric values are calculated without considering the relation of adjacent frames. Although some existing methods reduce flickering artifacts by calculating highly correlated transmission values between adjacent frames, flickering artifacts may still occur. Therefore, in order to effectively reduce flickering artifacts, we propose a novel approach considering temporal averages of atmospheric light values calculated from adjacent frames. Experimental results have shown that the proposed method achieves better performance of video dehazing with less flickering artifact than existing methods.

• Journal of the Korean Institute of Rural Architecture
• /
• 제19권2호
• /
• pp.9-16
• /
• 2017

The study analyzed the heat losses and the building energy efficiency grade by the energy simulation using the ENERGY# and ECO2 programs for the three types of Standard design of rural houses. It was calculated the energy efficiency rating by the ECO2 program for the rural housing standard design, and the energy demand and the energy consumption by each factor were compared and analyzed. And it analyzed energy consumption by element of each house by ENERGY # program. As a result, first in the evaluation of the energy efficiency grade of buildings by the ECO2 program, the rating for primary energy requirement for the housing newly built by the standard design of rural house is expected to range from 2 to 4 with 189.3 to $238.7kWh/m^2.a$. Second, the energy loss of each part of standard design of rural housing occurs in the order of ventilation 39%, window 33%, outer wall 14%, roof 9%, bottom 5%, and energy loss through ventilation and window occurs more than 70%. Third, the most beneficial effects on the energy efficiency grade is obtained the lowest grade of all three types by 2 when the lowering of the window and door heat transmission rate and the lowering of the light density, and the heat exchange ventilation device is not installed. Fourth, in the standard design of rural housing, the energy demand is occupied by heating > hot water > lighting order, and the order of the weight is changed in order of heating > lighting > ventilation > hot water. Fifth, building energy efficiency assessment system needs to establish policy for fixing rural housing energy as a practical device to ensure energy performance and quality.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제40권11호
• /
• pp.2178-2187
• /
• 2015

Bluetooth Low Energy (Bluetooth LE) is a representative break-through communication technology for wireless personal area networks on nowaday. In this environment, most of significant performance should be aiming to energy efficiency due to the policy for manufacturing light-weighted communication devices derived from requirement of world IoT market, and many researches have been developed to satisfy this requirement. While Bluetooth LE has been leading the low power communication technology required from the current market by employing duty cycle and frequency hopping approaches, it couldn't address the problem of reliability on broadcast transmissions. The main goal of this paper is aiming to addressing this problem by suggesting a new method. Furthermore analytic evaluations would also be proceeded to find objective results in the view point of broadcast transmission efficiency from Master device.

• Journal of the Korean Ceramic Society
• /
• 제45권9호
• /
• pp.524-530
• /
• 2008

Anti-Reflective (AR) thin film coatings of $SiO_2$ (n= 1.48) and $TiO_2$ (n=2.17) were deposited by ion-beam assisted deposition (IBAD) with End-Hall ion source and conventional electron beam (e-beam) evaporation to investigate the effect of deposition method on the refractive indicies (n) of the fIlms. Green-light generation using a GaAs laser diode was achieved via excitation of the second harmonic. The latter resulted from the transmission of the fundamental guided-mode wave of 1064 nm through periodically poled $LiNbO_3$. Large differences in the refractive indicies of each of the layers in the multilayer coating may improve AR performance. IBAD of $SiO_2$ reduced its refractive index from 1.45 to 1.34 at 1064 nm. Conversely, e-beam evaporation of $TiO_2$ increased its refractive index from 1.80 to 2.11. In addition, no fluctuations in absorption at the wavelength of 1064 nm were found. The results suggest that films prepared by different deposition methods can increase the effectiveness of multilayer AR coatings.

• The Journal of the Korea Contents Association
• /
• 제8권6호
• /
• pp.8-15
• /
• 2008

In this paper, in order to analyze property of frequency response in optical microphone, system was implemented. The capacitance microphone and fiber-optic transmission path type fiber-optic microphone (FOM) have weaknesses in directivity, size, weight, and price. However suggested optical microphone can be constituted by cheap devices, so it has many benefits like small size, light weight, high directivity, etc. Head part of optical microphone which is suggested in this paper is movable back and forth by sound pressure with the attached reflection plate. Operating point is determined by measuring the respond characteristics and choosing the point on which has maximum linearity and sensitivity while changing the distance between optical head and vibrating plate. We measured the output of the O/E transformed signal of the optical microphone while frequency of sound signal is changed using sound measurement/analysis program, Smaart Live and USBPre, which are based on PC, and compared the result from an existing capacitance microphone. The measured Optical microphone showed almost similar output characteristics as those of the compared condenser microphone, and its bandwidth performance was about 300[Hz]-3[kHz] at up to 3 [dB].

• Current Optics and Photonics
• /
• 제3권6호
• /
• pp.541-547
• /
• 2019

A novel photonic crystal fiber (PCF) sensor with three D-shaped holes based on surface plasmon resonance (SPR) is analyzed in this paper. Three D-shaped holes are filled with the analyte, and the gold film is deposited on the side of three planes. The design of D-shaped holes with outward expansion can effectively solve the uniformity problem of metallized nano-coating, it is beneficial to the filling of the analyte and is convenient for real-time measurement of the analyte. Compared with the hexagonal lattice structure, the triangular arrangement of the clad air holes can significantly reduce the transmission loss of light and improve the sensitivity of the sensor. The influences of the air hole diameter, the distance between D-shaped holes and core, and the counterclockwise rotation angle of D-shaped holes on sensing performance are studied. The simulation results show that the wavelength sensitivity of the designed sensor can be as high as 10100 nm/RIU and the resolution can reach 9.9 × 10^-6 RIU.

• Korean Journal of Environmental Biology
• /
• 제38권1호
• /
• pp.61-70
• /
• 2020

A eukaryotic microalga was isolated from seawater in Janghang Harbor, Korea and its morphological, molecular, and physiological characteristics were investigated. Due to its simple morphology, no distinctive characters were found by morphological observation, such as light microscope or scanning/transmission electron microscopy (S/TEM). However, molecular phylogenetic evidence inferred from the concatenated small subunit (SSU) 18S rRNA and internal transcribed spacer (ITS) sequence data indicated that the isolate belonged to the newly described Micractinium singularis. Furthermore, it was clustered with Antarctic Micractinium strains and it also showed a psychrotolerant property, surviving at temperatures as low as 5℃. However, its optimal growth temperatures range from 15℃ to 25℃, indicating that this microalga is a mesophile. Additionally, gas chromatography-mass spectrometry (GC/MS) analysis showed that the isolate was rich in nutritionally important omega-3 polyunsaturated fatty acid, and high-performance liquid chromatography analysis (HPLC) revealed that the high-value antioxidant lutein was biosynthesized as an accessory pigment by this microalga, with glucose as the major monosaccharide. Therefore, in this study, a Korean marine M. singularis species was discovered, characterized, and described. It was subsequently added to the national culture collections.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제40권10호
• /
• pp.1889-1899
• /
• 2015

In this paper, we propose a multiple slot reservation scheme to transmit data rapidly in the satellite random access channel. In the R-CRDSA (Reservation scheme with Contention Resolution Diversity Slotted ALOHA), each satellite terminal can use only one slot in a frame. Therefore, many slots are wasting in the low traffic load and the satellite terminals which have large date needs many frame to transmit their data although there are unused slots. In the multiple slot reservation scheme, each satellite terminal transmits a packet with their data size and reserves many slots in the light of data size and slot reservation status. Therefore, each satellite terminal transmits their data faster than R-CRDSA. This is because they can reserve many slots in a frame. Furthermore, we simulate proposed scheme and validate the performance of proposed scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제40권1호
• /
• pp.233-239
• /
• 2015

The demand of remote control and monitoring for efficiency and applications of LED streetlight is increasing continuously because the demand of LED streetlight was increase last few years. Existing street light remote control system is wired using a power line network. The wireless connection exists, but due to its low data transmission rate, it cannot support specialized applications. It can only support simple control and monitoring. In this paper, we propose a system that uses a IEEE 802.11s wireless mesh network based on WLAN, as a backbone network for remote control and monitoring of the LED street lights along with other specialized applications. Using the wireless mesh network for remote control and monitoring the LED street lights, the same can be used to act like a public Wi-Fi access point. We have designed Wi-Fi integrated LED streetlight controller and implemented our system. We evaluated the performance of our system on a real test bed. Our proposed system is expected to perform the role of a U-city infrastructure by utilizing the wireless mesh network.