• Journal of information and communication convergence engineering
• /
• 제13권1호
• /
• pp.1-6
• /
• 2015

In this study, we consider visible light communication in an indoor line-of-sight environment. It has been proved that among the multiple input multiple output (MIMO) techniques, spatial modulation (SM) performs better than repetition coding (RC) and spatial multiplexing (SMP). On the basis of a combination of SM and pulse amplitude modulation (PAM), here, we propose an enhanced SM algorithm to improve the bit error rate. Traditional SM activates only one light-emitting diode (LED) at one time, and the proposed enhanced SM activates two LEDs at one time and reduces the intensity levels of PAM by half. Under the condition of a highly correlated channel, power imbalance is used to improve the algorithm performance. The comparison between the two schemes is implemented at the same signal-to-noise ratio. The simulation results illustrate that the enhanced SM outperforms the traditional SM in both highly correlated and lowly correlated channels. Furthermore, the proposed enhanced SM scheme can increase the transmission rate in most cases.

• 원예과학기술지
• /
• 제32권4호
• /
• pp.454-462
• /
• 2014

'홍로'/M.9 사과나무 세장방추형의 생산성을 높이기 위하여 수고에 따른 투광율, 투약율, 수체생육, 과실 품질, 그리고 노동 생산성을 비교 분석하였다. 수고가 높을수록 수관내부, 특히 낮은 수관위치에서의 투광률은 감소하였다. 엽면적지수(LAI)는 수고가 높을수록 증가하였으나 엽면적지수의 증가는 수관 내부 농약 살포 효과를 감소시켰다. 신초 생장은 수고가 높을 때 가늘고 길게 자라는 경향이었고, 과실의 착색도는 수고가 높을 때 감소하였으나, 과실 경도와 산함량은 차이가 없었다. 수고가 높을 때 주당 착과수는 증가하였으나, 305g 이상의 대과 생산량은 감소하였다. 수고가 높아질수록 적화, 적과, 전정, 수확 등에 필요한 노동력은 증가하였으나, 높은 수고에서의 노동력 증가는 고소작업차를 투입하여 해결할 수 있었다. 4.5m 수고에서 적화 작업의 경우 사다리보다 전동고소작업차를 이용했을 때 작업시간은 14.6분/주가 절약되었다. 투광율 향상과 과실착색도 증진을 위하여 수관내부의 광환경 개선이 필요함을 알 수 있다.

• 한국통신학회논문지
• /
• 제36권3A호
• /
• pp.189-197
• /
• 2011

무선 광 통신 시스템에서 고속의 데이터를 전송하기 위한 방법으로 대역 효율이 높은 OFDM(orthogonal frequency division multiplexing) 시스템이 연구되고 있다. OFDM 시스템은 PAPR(peak to average power ratio)이 높고 비선형 에러와 디바이스의 불균형으로 발생하는 ICI(inter channel interference)가 발생한다. 무선 광통신 시스템에서 LED(light emission diode)의 구동 전류에 의하여 구동되는 광 출력 파워는 비선형이며 전송 신호는 왜곡된다. 그러므로 비선형 LED 전달함수와 OFDM 신호에 의한 방사된 광 출력의 수신 성능에 대한 연구가 진행되었다. 비선형 왜곡에 의해 발생하는 효과는 기존의 무선 통신에서 사용되는 OFDM의 비선형 특성과 다르며 BER 성능을 저감시킨다. 본 연구에서는 최근 연구된 LED의 비선형성 전달함수를 적용하며, 비선형 왜곡과 Back-off에 의하여 수신기의 주파수영역에서 진폭 감쇄와 ICI를 발생시키므로, BER 성능을 개선시키기 위한 방법을 제안한다. 먼저 LED의 비선형 왜곡을 감소시키기 위한 새로운 PAPR저감 기법을 제안하며, 또한 수산 성능을 향상시키기 위하여 적응형 채널 추정 방식과 전송된 신호를 사용하여 SNR(signal to power ratio)을 개선하여 BER(bit error rate)을 개선하였다. 제안된 방법들을 시뮬레이션 결과를 통하여 확인한다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 춘계학술대회 논문집
• /
• pp.658-664
• /
• 2012

This paper presents an investigation into driveline clonk noise of midi-bus. Test was performed for operational acceleration and pressure, torsional vibration of driveline and FRF to TPA. Wavelet analysis was used to study spectral-time characteristics to all measurement data and specially for torsional vibration, lash analysis was carried out. To investigate the path of the clonk in detail, time domain TPA was introduced. With time domain TPA, the contribution of each path for the clonk was estimated by both subjectively and objectively. As a result, Transmission mount part was came to light as the main contributor of issued clonk. This was verified by reinforcing the bracket of transmission side. And 1D torsional nvh performance simulation model was built with measured torsional vibration. The simulation tool was used for prediction of some clonk behavior in tip in-out transient condition.

• ETRI Journal
• /
• 제27권3호
• /
• pp.334-336
• /
• 2005

We improved the performance of the spectrum-sliced light source for wavelength-division-multiplexed passive optical networks by employing a Fabry-Perot laser diode(FP-LD). We found that the FP-LDs can suppress the intensity noise as significantly as using a gain-saturated semiconductor optical amplifier. The transmission characteristics were measured and analyzed in both conditions with and without employing an FP-LD.

• 한국통신학회논문지
• /
• 제37권3C호
• /
• pp.224-232
• /
• 2012

Priority MAC is an important issue in every communication system when we consider differentiated service applications. In this paper, we propose a mechanism to support priority MAC based on multi-parameters for IEEE 802.15.7 visible light communication (VLC). By using three parameters such as number of backoff times (NB), backoff exponent (BE) and contention window (CW), we provide priority for multi-level differentiated service applications. We consider beacon-enabled VLC personal area network (VPAN) mode with slotted version for random access algorithm in this paper. Based on a discrete-time Markov chain, we analyze the performance of proposed mechanism under non-saturation environments. By building a Markov chain model for multi-parameters, this paper presents the throughput and transmission delay time for VLC system. Numerical results show that we can apply three parameters to control the priority for VLC MAC protocol.

• 한국세라믹학회지
• /
• 제54권4호
• /
• pp.308-313
• /
• 2017

In this study we examined the photo-degradation efficiency of $CoS_2-G-TiO_2$ nanocomposites under visible light irritation using Reactive Black B (RBB) as standard dye, $CoS_2-G-TiO_2$ nanocomposites synthesized by facial microwave assist technique, and characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and Raman spectroscopic analysis. Our results show the efficiency of the $CoS_2-G-TiO_2$ ternary nanocomposite is better than $CoS_2-G$ and $TiO_2-G$ nanocomposite. The degradation efficiency of $CoS_2-G-TiO_2$ nanocomposite was found approximately 89% of Reactive Black B (RBB) degraded after 180 min. Our results will open new way for the development of a new ternary nanocomposite photocatalytic application.

• 한국공작기계학회논문집
• /
• 제16권5호
• /
• pp.145-150
• /
• 2007

Optical communication according to request of technology of communications and optical fiber to be full filed faster communication and pass over transmission capacity limit per unit area, per unit hour appeared, and this optical fiber acts the biggest role to influence performance of optical communication network. Optical fiber(PMF Polarization Maintaining Fiber) is used, and is used by electric field measurement, self-discipline measurement, sensor(Sensor) Department by high definition measure such as thermometry and storehouse component that use because make broad sense status and polarized light information in passageway and union with storehouse integrated circuit etc. that use broad sense interference developing could transmit in state that keep transmitting broad sense plane of polarization is polarized light existence. Also, research is developed by optical fiber for Coherent communication recently.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.659-662
• /
• 2007

The characteristics of a $SiN_x$ passivation layer grown by a specially designed catalyzer enhanced chemical vapor deposition (CECVD) system and electrical and optical properties of OLEDs passivated with the $SiN_x$ layer are described. Despite the low substrate temperature, the single $SiN_x$ passivation layer, grown on the PC substrate, exhibited a low water vapor transmission rate of $2{\sim}6{\times}10^{-2}\;g/m^2/day$ and a high transmittance of 87 %. In addition, current-voltage-luminescence results of an OLED passivated with a 150 nm-thick $SiN_x$ film compared to nonpassivated sample were identical indicating that the performance of an OLED is not critically affected by radiation from tungsten catalyzer during the $SiN_x$ deposition.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.1679-1688
• /
• 2008

Recently, the bogie frame weight of Light Rail Transit system has been reduced in order to save energy and materials. However, this light weighted vehicle structure is very important to verify the fatigue strength at the development stage. Bogie system consists of bogie frame, suspensions, wheel-sets, braking system and transmission system. Among these components, the bogie frame is most significant component subjected to the whole vehicle and passenger loads. In this study, the bogie frame for the New LRT power car is evaluated to the static and fatigue strength. And the evaluation method is used the LRT Performance Test Standards Specification throughout the FEM analysis and static load test. The static and fatigue test results for the LRT bogie frame of power car has been appeared very safety and stable for the design load conditions.