• Journal of Applied Reliability
• /
• v.16 no.2
• /
• pp.125-133
• /
• 2016

Purpose: The purpose of this study is to evaluate durability of platform safety step system in railway. Method: We performed finite element analysis & durability analysis of platform safety step system with VPD (Virtual Product Development) techniques and examined the durability standard & qualification life through the rig test during no failure test time in reliability qualification test. We continued to test 1 million cycles in KRS (Korea Railway Standard) for system's robust design performance. Result: FEM analysis results are 14.9MPa & 14.7MPa of pin-joint, pivot and durability analysis result is above 1 million cycles. we calculated theoretically no failure test time 855,000 cycles and through the 1 million cycles durability rig test in KRS standard we confirmed product quality. Conclusion: This platform safety step system was designed very safe in terms of a mechanical strength & durability.

• Journal of Genetic Medicine
• /
• v.19 no.1
• /
• pp.7-13
• /
• 2022

Purpose: Preimplantation genetic testing for monogenic disorders (PGT-M) has been successfully used to prevent couples with monogenic disorders from passing them on to their child. Charcot-Marie-Tooth Disease (CMT) is a genetic disorder characterized by progressive extremity muscle degeneration and loss of sensory function. For the first time in Korea, we report our experience of applying single nucleotide polymorphism genotyping and karyomapping for PGT-M of CMT disease. Materials and Methods: Prior to clinical PGT-M, preclinical tests were performed using genotypes of affected families to identify informative single-nucleotide polymorphisms associated with mutant alleles. We performed five cycles of in vitro fertilization PGT-M in four couples with CMT1A, CMT2A, and CMT2S in CHA Fertility Center, Seoul Station. Results: From July 2020 through August 2021, five cycles of PGT-M with karyomapping in four cases with CMT1 and CMT2 were analyzed retrospectively. A total of 17 blastocysts were biopsied and 15 embryos were successfully diagnosed (88.2%). Ten out of 15 embryos were diagnosed as unaffected (66.7%). Five cycles of PGT-M resulted in four transfer cycles, in which four embryos were transferred. Three clinical pregnancies were achieved (75%) and the prenatal diagnosis by amniocentesis for all three women confirmed PGT-M of karyomapping. One woman delivered a healthy baby uneventfully and two pregnancies are currently ongoing. Conclusion: This is the first report in Korea on the application of karyomapping in PGT-M for CMT patients. This study shows that karyomapping is an efficient, reliable and accurate diagnostic method for PGT-M in various types of CMT diseases.

• Journal of Industrial Convergence
• /
• v.21 no.9
• /
• pp.67-75
• /
• 2023

The purpose of this study was to investigate difference between walking practice and happiness of one-person households according to the life cycles. This is a secondary analysis study using data from the 2021 Community Health Survey. The data were analyzed using SPSS 25 program for composite sample statistical analysis. As a result, in old age, there were many women, low education, and non-economic activities, and there were many basic living and less than 7 hours of sleep. The walking practice of one-person households was low in youth, middle age, and old age of one-person households. The level of happiness by life cycles of one-person households was 6.69 points in youth, 6.43 points in old age, and 6.19 points in middle age, and the happiness of middle age was the lowest. In youth, middle age, and old age of one-person households, there was a significant differences in happiness depending on walking practice. Therefore, social, welfare, and policy strategies should be developed to encourage walking to improve happiness of one-person households.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2004.11a
• /
• pp.167-168
• /
• 2004

The purpose of this study was to find out the relationship between planning components of branded apartments and family life cycles. The web survey was employed in this research, and 110 responses were utilized for data analysis. This research used four family cycles based on the age of the first child - early childhood, elementary school, adolescence, and adulthood. The results of the research showed that the family life cycle of early childhood desired to have space-related features, family with adolescence wanted living-related components, and the family life cycle of adulthood was likely to consume large spaces

• Structural Engineering and Mechanics
• /
• v.57 no.1
• /
• pp.65-89
• /
• 2016

This paper presents the development of methodologies using Extended Finite Element Method (XFEM) for cracked unstiffened and concentric stiffened panels subjected to constant amplitude tensile fatigue loading. XFEM formulations such as level set representation of crack, element stiffness matrix formulation and numerical integration are presented and implemented in MATLAB software. Stiffeners of the stiffened panels are modelled using truss elements such that nodes of the panel and nodes of the stiffener coincide. Stress Intensity Factor (SIF) is computed from the solutions of XFEM using domain form of interaction integral. Paris's crack growth law is used to compute the number of fatigue cycles up to failure. Numerical investigations are carried out to model the crack growth, estimate the remaining life and generate damage tolerant curves. From the studies, it is observed that (i) there is a considerable increase in fatigue life of stiffened panels compared to unstiffened panels and (ii) as the external applied stress is decreasing number of fatigue life cycles taken by the component is increasing.

• Journal of Ocean Engineering and Technology
• /
• v.25 no.6
• /
• pp.49-55
• /
• 2011

In order to analyze feasibility of replacing a conventional 6-mm Ti bar with a 5-mm bar, a series of rotating bending fatigue tests were carried out on Ti-6Al-4V bars by strengthening the fatigue performance using a special technique called UNSM (Ultrasonic Nanocrystal Surface Modification). The results of S-N curves clearly showed that the performance of the 5-mm titanium specimen was similar to that of the 6-mm specimen when the UNSM treatment was applied. The 5-mm treated specimen converged with small scattering band into the linear line of the non-treated 6-mm one. Below the fatigue life of $10^5$ cycles, the UNSM treatment did not show any significant superiority in the bending stress and fatigue life. However, over the fatigue life of $10^5$ cycles, the effect of UNSM was superior for each fatigue life, and the bending stress became longer and higher than that of the untreated one. In the case of 6-mm Ti-bar with UNSM, the fatigue limit was about 592 MPa, and there was fatigue strength increase of about 30.7% at the fatigue life of $10^4$ cycles compared to the untreated 6-mm bar. Therefore, the compressive residual stress made by the UNSM in Ti-6Al-4V increased the fatigue strength by more than 30%.

• Journal of the Korean association of regional geographers
• /
• v.18 no.3
• /
• pp.283-297
• /
• 2012

This study aims to analyze an evolutionary path and the dynamics of the Seoul Digital Industrial Complex in Korea based on the analysis of cluster life cycles. From the mid 1960s to the late 1990s, the life cycles and their characteristics of the Seoul Digital Industrial Complex (Guro Industrial Park) are examined as emergence-growth-sustainment-decline focused on the number of firms and employees. After the late 1990s, the number of firms and employees increases rapidly and the active actors of the growth and restructuring are transformed to the technology-intensive SMEs and knowledge-based service firms. Knowledge industry centers (apartment-type factories) help evolve into the life cycle of transformation as knowledge-based clusters after the mid 2000s.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.10
• /
• pp.36-45
• /
• 1996

The precise estimation of the reliability and life of the Ravigneaux planetary gear train used in an automatic transmission is necessary in order to enable accurate material and geometric properties to reliability distrobution and the number of load cycles at failure. These are critical for the proba- bilistic design of complex planetary gear system as Ravigneaux type particularly during various gear ratios. The Ravigneaux planetary gear train has five gears, such as a forward and a reverse sun gear, a short and a long pinion, and an annulus gear. In this paper, the Ravigneaux gear system is analyzed to figure out the reliablity distribution. i.e. the probability of survival in the system without its overhaul. First, the reliablity method based on the Weibull distribution is used in conjuction with the Palmgren's model to predict both the individual reliabilities of its components and the nimber of load cycles when the system failed. Then using the presented method, the life of the Ravigneaux gear system can be determined. Alwo the different design parameters such as tooth face width, material property, and Weibull exponent are applied and reached to optimal ones. Thus, the precise evaluation of the reliability and life of the Ravigneaux planetary gear train used in an automatic transmission can be effectively carried out.

• Journal of Welding and Joining
• /
• v.22 no.6
• /
• pp.36-42
• /
• 2004

Experimental and numerical approaches on the thermal fatigue for the solder joint of flip chip package are discussed. However, it is one of the most difficult problems to choose the proper fatigue model. It was found that viscoplstic FE model with Darveaux method was very desirable and useful to predict the thermal fatigue life of solder joint for flip chip package under $208{\~}423K$ thermal cycling condition such as steep slope of temperature(JEDEC standard condition C). Thermal fatigue life was 1075 cycles as a result of viscoplatic model. It was a good agreement compared to the experimental. And also, it was found from the experimental that probability of the thermal fatigue life was $60{\%}$ at 1500 cycles.

• Journal of Ocean Engineering and Technology
• /
• v.6 no.2
• /
• pp.85-93
• /
• 1992

The only hardness of 2nd phase of martensite in dual phase steel which was composed of the martensite and ferrite was changed. Fatigue test was conducted by cantilever type of self-made rotated bending fatigue testing machine. The corrosion fatigue fracture behaviors of dual phase steel were investigated in 3% NaCl solution at $N_f$ = $1.5\times$$10^5$ $N_f$=1.0 $\times$ $10^6$ cycles. The fatigue strength was increased with increasing the hardness of 2nd phase. The size and number of corrsion pits were influenced by the 2nd phase hardness and pits remain constant in size just after they were transited into cracks. The life of crack initiation was effected by stress level. The shape of relation of $\Delta$K and da/dn has smaller scattering in it in 3% NaCl solution than that in air. The higher the 2nd phase hardness is, the higher the corrosion fatigue life becomes. Corrosion fatigue fracture behavior was effected by mechanics in case of $N_f$=1.5$\times$10$^5$$N_f$=1.5$\times$10$^6$ cycles.