• Explosives and Blasting
• /
• v.41 no.4
• /
• pp.9-16
• /
• 2023

To compare the global warming impact of the TBM and NATM method, which are representative tunnel excavation methods, a life cycle assessment was performed for each method. Life cycle assessment should compare the sum of carbon emissions by considering the pre-manufacturing stage, product manufacturing stage, usage stage, and disposal stage. However, access to TBM (Tunnel Boring Machine) manufacturing and disposal data is limited, so I had no choice but to focus on the analysis for the usage stage. In general, carbon emissions during the pre-product manufacturing stage and product manufacturing stage often exceed 90% of carbon emissions throughout the entire process. Therefore, since it is difficult to achieve the analysis goal only by comparing the usage stage, the analysis scope was expanded, and carbon emissions for the process were calculated for the NATM method with access to manufacturing data. As a result of comparing the relative impact on global warming, the carbon emissions of the TBM method were found to be higher than those of the NATM method even though TBM method was only considered for the usage stage. So there it is, the NATM method can be seen as environmentally friendly in the future when considering the impact of climate change (global warming), which has recently attracted attention among environmental impact fields.

• Korean Journal of Environmental Agriculture
• /
• v.22 no.1
• /
• pp.41-46
• /
• 2003

The suitability of the life Cycle Assessment (LCA) methodology to analyze the environmental impact of rice cultivation with different fertilizing systems is investigated. The arst part of an LCA is an inventory of parameters used and emissions released due to the system under investigation. In the following step, the Life Cycle Impact Assessment the inventory data were analyzed and aggregated in order to finally get one index representing the total environmental burden. For the life Cycle Impact Assessment (LCIA) the Eco-indicator 95 method has been chosen because this is well documented and regularly applied impact assessment method. The resulting index is called Eco-indicator value. The higher the Eco-indicator value the stronger is the total environmental impact of an analyzed fertilizing system. The rice field experiment conducted in middle parts of korea was chosen as an example for the life cycle impact analysis. In this experiment the treatments were consisted of none fertilizer plot (NF), standard fertilizer plot (SF) applied chemical fertilizers based on soil chemical analysis before rice transplanting, and efflux fertilized plot (EF) applied with pig wastes fermented as the same rates of SF plot as basis on total nitrogen content. The obtained Eco-indicator values were clearly different among the treatments in the rice trial. The total Eco-indicator values for SF and EF have been observed 58 and 38% relative to the NF, respectively. For all the treatments the environmental effects of eutrophication contributed most to the total Eco-indicator value. The results appeared that the LCA methodology is basically suitable to assess the environmental impact associated with different fertilizer applications for rice cultivation. A comparative analysis of the fertilizing system's contribution to global warming and eutrophication is possible.

• Advances in environmental research
• /
• v.2 no.4
• /
• pp.279-290
• /
• 2013

In this study, a comprehensive model developed to estimate greenhouse gas (GHG) emissions from urban area with low impact development (LID) and its integrated management practices (IMPs). The model was applied to the actual urban area in Asan Tangjeong district (ATD) as a case study. A rainwater tank (1200 ton) among various LID IMPs generated the highest amount of GHG emissions ($3.77{\times}10^5kgCO_2eq$) and led to the utmost reducing effect ($1.49{\times}10^3kgCO_2eq/year$). In the urban area with LID IMPs, annually $1.95{\times}104kgCO_2eq$ of avoided GHG emissions were generated by a reducing effect (e.g., tap water substitution and vegetation $CO_2$ absorption) for a payback period of 162 years. A sensitivity analysis was carried out to quantitatively evaluate the significance of the factors on the overall GHG emissions in ATD, and suggested to plant alternative vegetation on LID IMPs.

• Clean Technology
• /
• v.24 no.1
• /
• pp.9-14
• /
• 2018

In this study, Material life cycle evaluation was performed to analyze the environmental impact characteristics of TiN-Zr membrane manufacturing process. The software of MLCA was Gabi. Through this, environmental impact assessment was performed for each process. Transition metal nitrides have been researched extensively because of their properties. Among these, TiN has the most attention. TiN is a ceramic materials which possess the good combination of physical and chemical properties, such as high melting point, high hardness, and relatively low specific gravity, high wear resistance and high corrosion resistance. With these properties, TiN plays an important role in functional materials for application in separation hydrogen from fossil fuel. Precursor TiN was synthesized by sol-gel method and zirconium was coated by ball mill method. The metallurgical, physical and thermodynamic characteristics of the membranes were analyzed by using Scanning Electron Microscope (SEM), Energy Dispersive X-ray (EDS), X-ray Diffraction (XRD), Thermo Gravimetry/Differential Thermal Analysis (TG/DTA), Brunauer, Emmett, Teller (BET) and Gas Chromatograph System (GP). As a result of characterization and normalization, environmental impacts were 94% in MAETP (Marine Aquatic Ecotoxicity), 2% FAETP (Freshwater Aquatic Ecotoxicity), 2% HTP (Human Toxicity Potential). TiN fabrication process appears to have a direct or indirect impact on the human body. It is believed that the greatest impact that HTP can have on human is the carcinogenic properties. This shows that electricity use has a great influence on ecosystem impact. TiN-Zr was analyzed in Eco-Indicator '99 (EI99) and CML 2001 methodology.

• Resources Recycling
• /
• v.27 no.1
• /
• pp.64-73
• /
• 2018

This study aims to analysis the environmental impact on waste catalyst recycling technology using entire life cycle assessment. Environmental impacts consist of the five categories of impacts: global warming, resource depletion, acidification, eutrophication, and photochemical oxide production. The waste catalyst recycling presently have a GWP 3.53 ton $CO_2$ equivalent/ton, a ADP 0.017 ton Sb equivalent/ton, a AP 0.051 $SO_2$ equivalent/ton, a EP 0.0092 $PO{_4}^{3-}$ equivalent/ton, a 0.0019 ton $C_2H_4$ equivalent/ton. The smelting reduction process is the greatest contributor to all categories of environmental impacts in waste catalyst recycling. Electricity used in the smelting reduction process is the major contributor of all impact categories.

• Journal of Korea Society of Industrial Information Systems
• /
• v.17 no.6
• /
• pp.73-82
• /
• 2012

This paper reviews Privacy Impact Assessments in order to perform preventing and diagnosis against potential threats focused on the C-Shopping mall case. The quality of protection in C-shopping mall shows that the corporations itself is 29.2, the system is 68.8, the life cycle of the privacy is 25.5 and CCTV is 60.0. The lowest levels are the corporation's management 16.7, the life-cycle's saving and keeping 12.5, usage and offer 11.5 and destruction 16.7 among the life cycle of the privacy. The result of risk analysis shows that the highest levels are saving and keeping 13.3 and destruction 13.0. From the result, dangerous duplications are saving and keeping and destructions.

• Journal of Digital Convergence
• /
• v.10 no.7
• /
• pp.77-83
• /
• 2012

The purpose of this paper is to find out what impact the accural has on the each stage of corporate life cycle. In order to meet that purpose, we collect the financial information from 2001 to 2010 of listed companies and then the regression analysis was carried out to verify the hypothesis. The finding shows that the accural of maturity stage is significantly bigger than those of introductrory, growth stage and smaller than those of shake-out, decline stage.

• Transactions of the Korean hydrogen and new energy society
• /
• v.28 no.6
• /
• pp.627-634
• /
• 2017

In this study, Material life cycle evaluation was performed to analyze the environmental impact characteristics of TiN-ZrCo membrane manufacturting process. Gabi was used as software. The Eco-Indicator 99 methodology was used to evaluate the 11 impact categories and the 10 impact categories using the CML 2001 methodology. Precursor TiN was synthesized by sol-gel method and zirconium was coated by ball mill method. The metallurgical, physical and thermodynamic characteristics of the membranes were analyzed by using Scanning Electron Microscope (SEM), Energy Dispersive X-ray (EDS), X-ray Diffraction (XRD), Thermo Gravimetry/Differential Thermal Analysis (TG/DTA), Brunauer, Emmett, Teller (BET) and Gas Chromatograph System (GP). As a result of the characterization and normalization, the environmental impacts of each category of impacts were GWP 100 years with the highest environmental impact of 99.9%.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.13 no.1
• /
• pp.115-123
• /
• 2005

In this study, life cycle assessment(LCA) technique was employed to evaluate the environmental impact of material recycling of polyethylene terephthalate(PET) bottle. Life cycle inventory was established based on the data collected from recycling companies in Korea. Simapro 5.0 LCA software and Eco-indicator 95 index were used for the analysis. The biggest impact by the material recycling of PET bottle on the environmental category was the global warming. It is because melting and production of the recycled PET product consume a significant amount of electricity and energy. In the environmental pollution discharge, $CO_2$ emission was the highest, followed by NOx. This is probably due to the use of diesel and gasoline in the consumption of electricity and transportation. All the environmental impact showed (-) value except the ozone layer depletion, which means that the material recycling of PET bottle is environmentally fair. The use of recycled PET product greatly reduced the environmental impact.

• Korean Journal of Construction Engineering and Management
• /
• v.15 no.6
• /
• pp.83-91
• /
• 2014

The global community demands the reduction of environmental pollution such as greenhouse gas and carbon dioxide emissions. According to these requirements, the road construction project in the highest energy consuming industry is required the efficient way of reducing environmental pollution emissions. In this study, during the whole life cycle process, an environment impact assessment was performed for the several road construction projects in order to evaluate environmental stress through the road construction process. This study provides a proper process of environment impact assessment for life cycle assessment (LCA) analysis of road construction project, and figures the environmental stress regarding to the major construction materials for the case projects. In addition, this study conducted a sensitivity analysis for the key materials of environmental stress through the quantity analysis of major materials for the 1km section of a road construction. By this sensitivity analysis of total environmental stress change from the different volumes of constructing materials, it would be useful information for the environment impact assessment for the future road construction project.