• Tribology and Lubricants
• /
• v.33 no.6
• /
• pp.256-262
• /
• 2017

Molten zinc plating is a process in which zinc is thinly coated over a metallic or non-metallic surface. It is used in various industrial fields for corrosion resistance and decoration. During the process, a steel sheet is passed through a roll that rotates inside the molten zinc liquid in the temperature range of $460^{\circ}C$ to $680^{\circ}C$, and the plating liquid flows into the roll causing abrasion and erosion of the roll surface. This problem is known to accelerate the replacement cycle of the roll and cause considerable economic loss owing to production line stoppage. Here, we propose a mechanism that operates at high temperature and pressure with a labyrinth type seal design to resolve this problem. We theoretically investigate the flow of the plating solution inside the seal and compute the minimum rotation speed required to prevent the plating solution from entering the seal chamber. In addition, we calculate the thermal deformation of the seal during operation and display thermally deformed dimensions at high temperatures. To verify the theoretical results, we perform experiments using pilot test equipment working in the actual plating environment. The experimental results are in good agreement with theoretical results. We expect our results to contribute towards the extension of the roll's life span and thereby reduce the economic losses.

• Safety and Health at Work
• /
• v.1 no.2
• /
• pp.112-123
• /
• 2010

The paper gives an overview of the problems to be tackled nowadays by occupational health with regards to shift work as well as the main guidelines at organizational and medical levels on how to protect workers' health and well-being. Working time organization is becoming a key factor on account of new technologies, market globalization, economic competition, and extension of social services to general populations, all of which involve more and more people in continuous assistance and control of work processes over the 24 hours in a day. The large increase of epidemiological and clinical studies on this issue document the severity of this risk factor on human health and well being, at both social and psychophysical levels, starting from a disruption of biological circadian rhythms and sleep/wake cycle and ending in several psychosomatic troubles and disorders, likely also including cancer, and extending to impairment of performance efficiency as well as family and social life. Appropriate interventions on the organization of shift schedules according to ergonomic criteria and careful health surveillance and social support for shift workers are important preventive and corrective measures that allow people to keep working without significant health impairment.

• Convergence Security Journal
• /
• v.19 no.1
• /
• pp.31-40
• /
• 2019

Today, information security (INFOSEC) as a discipline is gaining more and more importance according to the emergence and extension of the cyberspace. Originated from Joint Doctrine for Information Operation (Joint Pub 3-13) by the U.S. Department of Defense, 'information assurance (IA)' is the concept widely used in the relevant field. Grown from the practice of information security, it encompasses broader and more proactive protection that includes countermeasures and repair, security management throughout an information system (IS)'s life-cycle, and trustworthiness of an IS in the process of risk analysis. In Korea, many industry professionals tend to misunderstand IA, remaining unaware of the conceptual differences between IA and INFOSEC. On this account, the current study attempted to provide a combined definition of IA by reviewing relevant literature. This study showed the validity of the wordings used in the proposed definition phrase by phrase.

• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.8
• /
• pp.689-696
• /
• 2001

Large-scale Multi-disciplinary Systems(LMS) such as transportation, aerospace, defense etc. are complex systems in which there are many subsystems, interfaces, functions and demanding performance requirements. Because many contractors participate in the development, it is necessary to apply methods of sharing common objectives and communicating design status effectively among all of the stakeholders. The processes and methods of systems engineering which includes system requirement analysis; functional analysis; architecting; system analysis; interface control; and system specification development provide a success-oriented disciplined approach to the project. This paper shows not only the methodology and the results of model-based systems engineering to Automated Guided Transit(AGT) system as one of LMS systems, but also propose the extension of the model-based tool to help manage a project by linking WBS (Work Breakdown Structure), work organization, and PBS (Product Breakdown Structure). In performing the model-based functional analysis, the focus was on the operation concept of an example rail system at the top-level and the propulsion/braking function, a key function of the modern automated rail system. The model-based behavior analysis approach that applies a discrete-event simulation method facilitates the system functional definition and the test and verification activities. The first application of computer-aided tool, RDD-100, in the railway industry demonstrates the capability to model product design knowledge and decisions concerning key issues such as the rationale for architecting the top-level system. The model-based product design knowledge will be essential in integrating the follow-on life-cycle phase activities. production through operation and support, over the life of the AGT system. Additionally, when a new generation train system is required, the reuse of the model-based database can increase the system design productivity and effectiveness significantly.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.10
• /
• pp.1437-1442
• /
• 2010

A slipper metal is used for power transmission in the aluminum hot rolling process. The slipper metal connects a spindle with a coupling. Therefore, if the slipper metal is seriously damaged, the spindle and the coupling will crash into each other. Therefore, preventing the destruction of the slipper metal is essential for ensuring a long mechanical life cycle. In this study, the structural analysis and optimal design of the slipper metal was carried out by finite element method for life extension of the slipper metal. To verify the interference of spindle assembly with modified slipper metal, a kinematics simulation was performed by applying various combinations of dynamic boundary conditions. As a result of structural analysis and optimal design of the slipper metal, the maximum stress of the modified slipper metal was lower than that of the initial model by 22%.

• Journal of Embryo Transfer
• /
• v.27 no.4
• /
• pp.265-270
• /
• 2012

In canine, oocytes are ovulated at the GV (germinal vesicle) stage and they have to fulfill maturation phase before reaching metaphase II stage. The efficiency of in vitro maturation is still very low. Therefore, the aim of this study was to investigate the effect of in vitro maturation on nuclear changes of immature canine oocytes recovered from different reproductive stages ovaries and different culture conditions. The oocytes were cultured in TCM-199 with supplement at 5% $CO_2$ and $38.5^{\circ}C$ for 72 h. The nuclear maturation of canine oocytes was evaluated with Hoechst 33342 stain under fluorescence microscope (Fig. 1). The results of this study detected differences in in vitro maturation rate between oocytes recovered from follicle status and non-follicle status ovaries. However, these differences were not significant as indicated in Table 1 and Fig. 2. In regard to the effect of culture condition with supplements, we did not found significant differences compared with control group (Table 2, Table 3). One of the reasons for this data could be the conditions that ovaries were exposed during slaughtering process or the long distant transportation of the ovaries. Although these data have not shown clearly significant differences results compared with control, furthermore the different reproductive status ovaries was beneficial for maturation of oocytes in vitro and can be a basic part of knowledge to improve in vitro maturation of canine oocytes.

• Korean Journal of Construction Engineering and Management
• /
• v.19 no.6
• /
• pp.46-54
• /
• 2018

In the 21st century, the Earth has continued its efforts to reduce carbon emissions to overcome the crisis caused by climate change. The construction industry, which is a representative industry that produces large amounts of the environmental load during construction, should actively reduce the amount of the environmental load. From the planning stage of the construction facility, it is necessary to consider the environmental load such as route selection and structure type selection to reduce the environmental load. However, the environmental load can be estimated based on the input resource amount. However, in the planning stage, it is difficult to accurately calculate the environmental load due to lack of information on the construction amount. The purpose of this study is to select the environmental load factors for IPC girder bridges to be used in the environmental load estimation model in the planning stage. Specific information related to the environmental load was selected from a list of information available in the planning stage, reflecting the Life Cycle Assessment(LCA), correlation, principal components analysis and expert opinion. The list of selected planning stage information is 10 such as span length and bridge extension, and it is expected to be used as a basic data for the future development of environmental load estimation model.

• KSBB Journal
• /
• v.23 no.5
• /
• pp.375-380
• /
• 2008

We made an experiment of keeping extension of raw and semi-dried flounder (Pleuronectes herzensteini). Effect of with(WG) or without gill (OG), drying degree (20% drying：20D, 40% drying：40D) and storage temperature (5 and $10^{\circ}C$) and 0.1% chitosan-ascorbate (CA) treatment of vacuum packaging flounder on growth of contaminated microorganism during storage for 10 days were investigated. Total aerobacter (TA) in the OG-treated raw flounder was $0.3{\sim}0.5$ log cycle lower than that of WG-treated flounder and also, number of coliform (CF) and E. coli (CO) in OG were lower compared with WG. Number of TA,. Especially, the TA was $0.42{\sim}1.20$ log cycle lower compared with raw flounder. The TA of the raw flounder stored at $5^{\circ}C$ compared to $10^{\circ}C$ was $0.6{\sim}1.3$ log cycle lower. The growth of total aerobacter, coliform (and E. coli separated from raw flounder in tryptic soy broth were completely inhibited by 0.1% CA. But the growth of TA in the raw and 20% dried flounder was 1.5 log cycle inhibited by 0.1% CA, and the growth of CF and CO were also slightly inhibited. We did value raw sample that treated CA 0D and 20D, and did vaccum packaging at the $10^{\circ}C$ for 10 days, Sensory quality such as appearance, freshness, and texture and overall acceptability after cooking of the 0.1% CA-treated raw and 20% dried flounder were evaluated from good to very good, while CA non-treated products were evaluated to moderate.

• Journal of Embryo Transfer
• /
• v.24 no.4
• /
• pp.289-292
• /
• 2009

Mongolia has 80% livestock of total agriculture industry, 170,000 farms are engaged, 2,500,000 of cows that were beef and dairy cows are raised. Despite of Mongolian has great application with milk, there are not clear differences between cow and dairy cattle, and the production of milk is also low. But the milk suppliers are varied (horse, sheep, goat, etc), so that the total milk production is 500 thousand ton per year. It's really considerable to improve the breed of owing to many problems with big differences among milk qualities. For carrying out for first year project, artificial insemination project was operated with 3rd grade Holstein semen that were imported from S. Korea, and initiation and field training were also carried out through appropriate AI technique we developed for Mongolia environment. Local information research and MOU conclusion were done with professor D. Altangerel in May $10^{th}{\sim}13^{th}$, 2009, and development for AI technique and AI equipments were supplied for Mongolia breeding and natural environment in July $10^{th}{\sim}17^{th}$ in 2009. All cows were treated by synchronization for AI. To do this, $PGF_{2\alpha}$ injection were treated for luteal phase cow, if it wouldn't work, try again after 11 days. After confirmation of estrus, AI and AI training were carried out with sperm injection in the uterus or cervix by rectum-vagina method which is common worldwide, the most effective artificial insemination technique. If cows were return to next estrus cycle, second AI was carried out about approximately 21 days after artificial insemination. After 2 months, all cows not showing return estrus should be taken pregnancy test. Every pregnant cow will be cared thoroughly. Total 48 cows administrated by $PGF_{2\alpha}$ for synchronization and after 48 hours 45 cows (93.8%) showing estrus were detected and then artificial inseminate them within who 8 cows (27.8%) showed return estrus. Therefore, Using $PGF_2{\alpha}$ for synchronization is effective to use for Mongolia breeding conditions. There are possibility of base for food production after all, including increase of livestock production in Mongolia by improvement of breeding cow with AI and embryo transfer project.

• Food Science and Preservation
• /
• v.9 no.3
• /
• pp.321-326
• /
• 2002

Paeksulkis(Korean rice cake) containing 0-0.5% chitosan were prepared for test the quality of microbiological, mechanical and sensory characteristics. The pH of Paeksulkis was 5.65 without chitosan and that was about 7.0 with 0.05-0.5% level of chitosan. In Hunter's color values of Paeksulkis of control, the lightness(L) was 84.28, redness(a) was -1.56 and yellowness(b) was 7.68. The lightness(L), redness(a) and yellowness(b) were increased with increasing concentration of chitosan in Paeksulkis. In mechanical characteristics of Paeksulkis, cohesiveness and springiness were the highest in control group while strength, hardness, gumminess and brittlenes were higher in chitosan added group than control group. In sensory evaluation of Pasksulkis, control group obtained the highest score in color, texture, after swallowing and overall quality(p<0.05) but chitosan added group obtained higher scores in moisture than control(p<0.05). Total bacterial counts(TBC) of Paeksulgis immediately before storage were 4.2∼9.2$\times$10$^2$CFU/g and those of control increased for 2 weeks, reached at 7.4$\times$10$\^$5/ CFU/g and then decreased about 1 log cycle for 2 weeks during storage at 5$\^{C}$. TBC of Paeksulgis added 0.3∼0.5% of chitosan were 2 log cycles lower than that of control at the end of storage at 5$\^{C}$. TBC of Pasksulgis control increased to 10$\^$8/ CFU/g during storage at 20$\^{C}$ but that of 0.5% chitosan added group was 1 log cycle lower than control at the end of storage. Shelf-life extension of Paeksulkis by chitosan was more effective during storage at 5$\^{C}$ than at 20$\^{C}$.