• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.54 no.3
• /
• pp.287-293
• /
• 2009

In this study, red ginseng extract solutions were analyzed to set up the functional saponin content and quality optimization condition. The highest saponin content among the total red ginseng extracts was 64.6 mg / 100 ml which was extracted at $75^{\circ}C$ for 18 hours. In addition, the saponin content decreased according to the increased extraction temperature and time. The highest total content of $Rb_2$ and Re was 11.8 mg / 100 ml at $75^{\circ}C$ for 12 hours which decreased according to the increased extraction temperature and time. The prosapogenin content of red ginseng extract was increased at $75^{\circ}C$ and $85^{\circ}C$ while the content decreased at $95^{\circ}C$, in which the highest prosapogenin content was 34.9 mg / 100 ml at $85^{\circ}C$ for 24 hours. The total sugar content and cloudness were increased according to the increased extraction time at $95^{\circ}C$, but pH and hue value were decreased according to the increased extracted time. The highest sweetness content was 4.0% which was found at $95^{\circ}C$ for 24 hours extract. Therefore, the most appropriate red ginseng extracting method was lower the temperature for saponin content at first time in combination with raise the temperature for taste at second time.

• Journal of Life Science
• /
• v.18 no.8
• /
• pp.1106-1114
• /
• 2008

The antioxidants activities in water and 95% ethanol extracts of wa-song (Orostachys japonicus A. Berger) dried by sun, hot air and lyophilization were measured in vitro reaction system. In reaction system containing linoleic acid, the antioxidant activities against lipid oxidation enhanced in proportion to storage time. The antioxidant activity of ethanol extracts was higher than that of water extracts. In the drying methods, wa-song extracts showed higher antioxidant activity in the other of hot air-dried, lyophilized and sun-dried. The lipid oxidation system containing the promoting factors, such as $Fe^{+2}$ and $Cu^{+2}$ions, also showed that the ethanol extract of hot air-dried wa-song possessed the highest antioxidant activity. Soybean oil and lard being added with various levels (0.1, 0.5 and 1.0 g/100 g) of the ethanol extract of hot air-dried wa-song were stored at $60^{\circ}C$ (for 28 days) or $180^{\circ}C$ (for 48 hr). Its extract appeared to lower the acid value of soybean oil, wheras it failed to lower the acid value for lard at early storage time, but it was lower than control and BHT after 28 days. Anicidine value and peroxide value were lower soybean and lard added wa-song extract than control and BHT for storage for 28 days at $60^{\circ}C$. In 28 days, its value was significantly decreased in proportion to sample concentration. TBA value was increased during storage time at $60^{\circ}C$, but it was significantly decreased by sample concentration after storage 36 hours at $180^{\circ}C$ storage. Therefore results suggest ethanol extract of hot air-dried wa-song could be potential candidates for natural antioxidants for materials containing lipid.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.2
• /
• pp.886-891
• /
• 2018

Colloid silica using as abrasive for polishing sapphire has been extensively studied, which mechanism has also been deeply discussed. However, by the requirement of application enlargement and cost reduction, some new problems appear such as silica service life time, particle diameter mixing, etc. In this paper, several influences of colloid silica usage on sapphire CMP are examined. Results show particle diameter and concentration, pH value, service life time, particle diameter mixing heavily influence removal rate. Further analysis discloses there are two main effect aspects which are quantity of hydroxyl group, contact area for abrasive density stacking between abrasive and sapphire. Based on the discussions, a dynamic process of sapphire polishing is proposed.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05b
• /
• pp.401-406
• /
• 1997

This paper presents preliminary results on the degradation of BJTs(Bipolar Junction Transistors) and MOSFETs(Metal Oxide Semiconductor Field Effect Transistors) by 1MeV electron beam. Exposure experimental results show that the change of minority-carrier life time in base region dominates the behavior of BJTs and that the buildup of charges in oxide region can affect the value of threshold voltage for MOSFETs. It was possible to correlate the decrease of the minority-carrier life time of BJTs with irradiation dose, while the shift of MOSFETs' threshold voltage was not only a function of charge buildup in oxide region.

• Elastomers and Composites
• /
• v.54 no.4
• /
• pp.351-358
• /
• 2019

To evaluate the aging of a rubber pad in power window switch which is the part of a vehicle, the accelerated thermal aging test of rubber pad material is performed. Finite element analysis was performed using the nonlinear material constants of the rubber pad to calculate the operating force, and the Arrhenius relationship was derived from the aging temperature and time. The aging test was performed at 150, 180, 210, or 240 ℃ for 1 to 60 days. When the operating force of the rubber pad is changed by 10% from the initial value, the service life is expected to be 113 years, which is much longer than the life of the vehicle. This indicates that the aging life of the rubber pad is sufficiently safe and the operating force of the rubber pad during the life of the vehicle (20 years) was decreased by approximately 8.4%. By examining the correlation between the shear elastic modulus and operating force calculated from finite element analysis under each aging test condition, the changes in the operating force of the rubber pad and the shear elastic modulus showed good linear relationship. The aging life could be predicted by the change in shear elastic modulus and a process for predicting the aging life of automotive power window switch rubber pad parts is described herein.

• Journal of agriculture & life science
• /
• v.46 no.5
• /
• pp.37-45
• /
• 2012

This study was carried out to examine the optimal treatment conditions of ethanol and glycerine for processing technology development of preserved flowers in carnation (Dianthus caryophyllus) 'Desio' commonly used for flower design. For this purpose, effects of dipping duration of ethanol solution and treatment duration and concentration of glycerine on preserved flower quality were evaluated. Ethanol treatment resulted in perfect dehydration and decoloration of petals and it was proper at 24~48 hours under high brightness and low chroma. Appropriate concentration and time of glycerine treatment was 30% at 36 hours because it resulted in Munsell value of 4.0R in Hue, 6.49 in Value, and 19.8 in Chroma (4.0R 6.49/14) representing the most approximate value to that of fresh petals. Decreasing rate in weight after desiccation tended to reduce by longer time of immersing and higher concentration. Weight after 12 hours of immersing reduced up to 86~90% according to treatment time in non-treatment group of glycerin, meanwhile, it reduced up to 51~69% under higher concentration of 40%. However, weight after 48 hours of immersing reduced up to 90% regardless of desiccation time in non-treatment group of glycerine, to the contrary, decreasing rate reduced by 46~54% through glycerine treatment of 40%. Time for desiccation required 24 hours in glycerin concentration of 10~20% except 6 hours of immersing time, however, higher concentration resulted in increased time up to 48 hours.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.3
• /
• pp.206-212
• /
• 2011

It was investigated the hardness and dimensional stability of heat-compressed wood by compression temperature and time. The surface hardness of heat-compressed wood increased with increasing compression temperature. The lowest hardness value (5.0 N/$mm^2$) was observed in the temperature $70^{\circ}C$ while the highest value (15.6 N/$mm^2$) was obtained in compression temperature $220^{\circ}C$. Dimensional recovery test results showed that fixation of compression set improved with increasing compression temperature. However, the fixation effects were negligible by press time. Contact angle increased with increasing press temperature and time.

• The Korean Journal of Pesticide Science
• /
• v.18 no.4
• /
• pp.434-438
• /
• 2014

The mixture of fluxapyroxad plus pyraclostrobin or the 9 time-spray schedule with various fungicides was evaluated for their efficacy in controlling pear scab in field trials. It showed sufficient condition to evaluate the efficacy of fungicides for the control of pear scab since disease incidence of the untreated control plot was 58.4% or 100% on leaves or fruits, respectively. Pear scab on leaves was occurred by 6.3% at treated plot with the mixture of fluxapyroxad plus pyraclostrobin, resulting in the 89.2% of control value. Incidence of the fruit disease was 16.7% at treated plot with the mixture of fluxapyroxad plus pyraclostrobin, showing 83.3% of control value. When the 9 time-spray schedule was tested, pear scab was occurred by 5% or 13.3% on leaves or fruits, respectively. Their control values were the 91.4% on leaves or 86.7% on fruits. Although the 9 time-spray schedule showed slightly lower disease incidence than the mixture of fluxapyroxad plus pyraclostrobin, but there is no statistically significant difference. These results suggest that the mixture of fluxapyroxad plus pyraclostrobin can control effectively the pear scab.

• Journal of Information Technology Services
• /
• v.20 no.3
• /
• pp.41-56
• /
• 2021

New drug discovery and development research enable clinical treatment that saves human life and improves the quality of life, but the possibility of success with new drugs is significantly low despite a long time of 14 to 16 years and a large investment of 2 to 3 trillion won in traditional methods. As artificial intelligence is expected to radically change the new drug development paradigm, artificial intelligence new drug discovery and development projects are underway in various forms of collaboration, such as joint research between global pharmaceutical companies and IT companies, and government-private consortiums. This study uses the TOE framework and the Value-based Adoption Model, and the technical, organizational, and environmental factors that should be considered for the acceptance of AI technology at the level of the new drug research organization are the value of artificial intelligence technology. By analyzing the explanatory power of the relationship between perception and intention to use, it is intended to derive practical implications. Therefore, in this work, we present a research model in which technical, organizational, and environmental factors affecting the introduction of artificial intelligence technologies are mediated by strategic value recognition that takes into account all factors of benefit and sacrifice. Empirical analysis shows that usefulness, technicality, and innovativeness have significantly affected the perceived value of AI drug development systems, and that social influence and technology support infrastructure have significant impact on AI Drug Discovery and Development systems.

• Management & Information Systems Review
• /
• v.5
• /
• pp.61-79
• /
• 2000

This research suggests the strategic adoption methodology of Customer Relationship Management. The backgrounds of CRM is the business environment changing that Market power is shifting to the customer who has unprecedented powers of choice today. The strategic adoption of Customer Relationship Management determines the value, needs and preferences of each customer or customer segment. Customer Relationship Strategy is an explicitly defined plan for how a company has decided to connect with, relate to, and focus on its chosen customers to create value. Deliberate decisions must be made, often involving trade-offs, so that investments are aligned with customer needs and value. Plan defined in terms of target customers value proposition, role in value delivery, and risk/reward sharing. All customers are not created equal; specific customers and/or customers segments are more desirable/valuable to pursue. Key premise of CRM is that value can be created by changing company's business model to better connect with customers. Area of service of Customer Relationship Management are as follows. Portfolio strategy, Market Opportunity Assessment, Brand Equity, Market Positioning, Pricing, Channel Strategy, Market Segmentation. Target Market Identification, Customer LifeTime Value Analysis, Customer Profitability, Customer Connections Economics Analysis. The objects of CRM are maximizing customer service effectiveness, improving customer loyalty, increasing customer service efficiency, optimizing intelligence about customer behaviors and preferences.