• Corrosion Science and Technology
• /
• 제4권4호
• /
• pp.147-154
• /
• 2005

The creep resistance of geogrids is one of the most significant long-term safety characteristics used as the reinforcement in slopes and embankments. The failure of geogrids is defined as creep strain greater than 10%. In this study, the accelerated creep tests were applied to polyester geogrids at various loading levels of 30, 50% of the yield strengths and temperatures using newly designed test equipment. Also, the new test equipment permitted the creep testing at or above glass transition temperature($T_g$) of 75, 80, $85^{\circ}C$. The time-dependent creep behaviors were observed at various temperatures and loading levels. And then the creep curves were shifted and superposed in the time axis by applying time-temperature supposition principles. The shifting factors(AFs) were obtained using WLF equation. In predicting the lifetimes of geogrids, the underlying distribution for failure times were determined based on identification of the failure mechanism. The results confirmed that the failure distribution of geogrids followed Weibull distribution with increasing failure rate and the lifetimes of geogrids were close to 100 years which was required service life in the field with 1.75 of reduction factor of safety. Using the newly designed equipment, the creep test of geogrids was found to be highly accelerated. Furthermore, the time-temperature superposition with the newly designed test equipment was shown to be effective in predicting the lifetimes of geogrids with shorter test times and can be applied to the other geosynthetics.

• International Journal of Reliability and Applications
• /
• 제15권2호
• /
• pp.85-98
• /
• 2014

Accelerated life testing (ALT) is a well famous technique in life testing and reliability studies, this is particularly used to induce so high stress leading to failure of the highly reliable units quickly under stipulated duration of time. The step-stress ALT is one of the systematic experimental strategy of ALT applied to fail the units in steps. In this article we focus on two important issues (i) necessity of life tests at higher steps with relevant causes (ii) to develop a new optimum test plan for 3-step SSALT under the modified cumulative exposure model proposed by Khamis and Higgins (1998). It is assumed that the lifetime of test units follows Rayleigh distribution and its scale parameter at constant stress level is assumed to be a log-linear function of the stress. The maximum likelihood estimates of the parameters involved in the step-stress ALT model are obtained. A simulation study is performed for numerical investigation of the proposed new optimum plan 3-step, step-stress ALT. The necessity of the life test units at 3-step step-stress is also numerically examined in comparison to simple step-stress setup.

• 동력기계공학회지
• /
• 제5권1호
• /
• pp.80-88
• /
• 2001

The spot welding method has been used in the joining of structures, automotive body, railway carriage, aircraft, household electric appliances, precision parts etc., because of brief working, easy automation, available mass production, and convenience. In this paper, the effects of welding conditions on the fatigue life and the prediction of fatigue life based on fracture mechanics theory of spot welded joint were investigated. Fatigue tests were conducted with the tensile-shear specimens welded in the various current using cold rolled steel sheets. Fatigue life of spot welded joint was predicted and compared with experimental results. Using FEM(finite element method), we analysed the distribution of stress and the condition of deformation on the environments of nugget.

• Journal of the Korean Data and Information Science Society
• /
• 제8권1호
• /
• pp.21-30
• /
• 1997

가속수명시험에서 강한충격수준에서 부품들의 고장시간이 관측되고 가속화된 고장시간을 토대로 정상충격수준에서 부품들의 성능을 조사한다. 본 논문은 지수수명분포에서 중도절단된 가속수명자료를 이용하여 고장률의 사전분포의 평균을 알 때, 정상조건하에서 하나의 미래 관찰치의 예측문제를 사전분포의 모수에 대하여 적률추정량을 이용하는 경험적 베이즈 접근방법을 적용시켜 경험적 베이즈 예측분포와 예측구간에 대하여 연구하였다.

• 한국안전학회지
• /
• 제27권4호
• /
• pp.13-19
• /
• 2012

The purpose of this study is to extract the major factors related to the deterioration mechanism of white organic light-emitting diodes(WOLED) by performing accelerated testing of temperature, voltage, time, etc., and to develop an accelerated life test(ALT) model. The measurement results of the brightness of the WOLED exhibited that their average brightness tended to increase as the operating voltage increased and that the half-life period of the brightness appeared after approximately 400 hours when the operating voltage was 20V and the ambient temperature was $85^{\circ}C$. It could be seen that although the WOLED showed comparatively the same brightness when the initial acceleration began after the operating voltage was applied to it, its brightness changed excessively after the WOLED's thermal storage had been made. In addition, it was observed that the half-life period was reduced as the ambient temperature and applied voltage increased. The strength of the WOLED which had been maintained in the range of visible light at the maximum load was reduced by the deterioration of the organic light emitting material due to the influence of the operating voltage and temperature, and the reduction of emitted light was small at low voltage and temperature. It could be seen that the failure of the WOLED during the ALT was caused by wear due to load accumulation over time, and that Weibull distribution was appropriate for the life distribution and acceleration was established between test conditions. From the WOLED analysis, it is thought that factors influencing the brightness deterioration are voltage, temperature, etc., and that comprehensive analysis considering discharge control, dielectric tangent margin, etc., would further increase the reliability.

• ALGAE
• /
• 제26권2호
• /
• pp.141-152
• /
• 2011

The present study describes the morphology, taxonomy, and distribution of species belonging to the diatom genus Rhizosolenia in Korea's marine coastal waters. From September 2008 to February 2010, we collected phytoplankton samples at 30 sites along the Korean coastline and studied them by light and scanning electron microscopy. We found 6 rhizosolenid genera in our samples: Rhizosolenia, Dactyliosolen, Guinardia, Pseudosolenia, Proboscia, and Neocalyptrella. In the present paper, we studied the following rhizosolenid species and compared them with congeners: R. pungens, R. fallax, R. imbricata, Rhizosolenia sp. 1, and Rhizosolenia sp. 2. The morphology of R. pungens exhibits important diagnostic characteristics in its girdle segment structure in the column and in its external process. To distinguish R. fallax and R. imbricata, the most important characteristics are the striation and the velum structure. R. pungens occurred in our samples all along the Korean coast. Only rarely did we find R. imbricata in the samples and at low abundance. We recorded R. fallax, Rhizosolenia sp. 1 and Rhizosolenia sp. 2 for the first time in Korean waters, but they rarely occurred.

• 한국안전학회지
• /
• 제32권5호
• /
• pp.115-121
• /
• 2017

This paper is to introduce the main modeling assumptions and data structures associated with right-censored data to describe the successful methodological ideas for analyzing such a field-failure-data when components operating in different environments. The Kaplan - Meier method is the most popular method used for survival analysis. Together with the log-rank test, it may provide us with an opportunity to estimate survival probabilities and to compare survival between groups. An important advantage of the Kaplan - Meier curve is that the method can take into account some types of censored data, particularly right-censoring. The above non-parametric method was used to verify the equality of parts life used in different environments. After that, we performed the life distribution analysis using the parametric method. We simulated data from three distributions: exponential, normal, and Weibull. This allowed us to compare the results of the estimates to the known true values and to quantify the reliability indices. Here we used the Akaike information criterion to find a suitable life time distribution. If the Akaike information criterion is the smallest, the best model of failure data is presented. In this paper, no-nparametrics and parametrics methods are analyzed using R program which is a popular statistical program.

• 품질경영학회지
• /
• 제41권1호
• /
• pp.135-148
• /
• 2013

Purpose: This paper presents a method to evaluate the stockpile reliability of propelling charge for performance and storage safety with storage time. Methods: We consider a performance failure level is the amount of muzzle velocity drop which is the maximum allowed standard deviation multiplied by 6. The lifetime for performance is estimated by non-linear regression analysis. The state failure level is assumed that the content of stabilizer is below 0.2%. Because the degradation of stabilizer with storage time has both distribution of state and distribution of lifetime, it must be evaluated by stochastic process method such as gamma process. Results: It is estimated that the lifetime for performance is 59 years. The state distribution at each storage time can be shown from probability density function of degradation. It is estimated that the average lifetime as $B_{50}$ life is 33 years from cumulative failure distribution function curve. Conclusion: The lifetime for storage safety is shorter than for performance and we must consider both the lifetime for storage safety and the lifetime performance because of variation of degradation rate.

• 품질경영학회지
• /
• 제34권3호
• /
• pp.19-30
• /
• 2006

For highly reliable products, it is difficult to assess the lifetime of the products with traditional life tests. Accordingly, a recent approach is to observe the performance degradation of product during the test rather than regular failure time. This study compares performances of three methods(i.e. the approximation, analytical and numerical methods) to estimate the parameters and quantiles of the lifetime when the time-to-failure distribution follows Weibull and lognormal distributions under a random coefficient degradation rate model. Numerical experiments are also conducted to investigate the effects of model error such as measurements in a random coefficient model.

• 한국대기환경학회지
• /
• 제6권2호
• /
• pp.176-182
• /
• 1990

A one dimensional cumulus cloud model has been developed to investigate the size distribution of hydrometeors at different heights and at different stages of cloud development. The model results show that the exponential distribution of droplet radius that was employed by many investigators can misinterpret the cloud dynamic fields during the life cycle of cumulus cloud. The results also show the bimodal distribution of cloud water mixing ratios at 25 $\mu$m and 645 $\mu$m in radius at 45 minutes of simulation time. The developed model can be applied in future on the parameterization of cloud microphysical processes and air pollution models.