• 폴리머
• /
• 제24권6호
• /
• pp.802-809
• /
• 2000

Poly(L-glutamic acid) (PLGA)와 PVA 블렌드막을 제조한 후, ethanol 수용액중에서 막증의 polypeptide 사슬의 2차구조 전이거동에 미치는 용매조성 및 대이온종의 영향과 알칼리 금속 이온 (Li, na, K, Cs)에 대한 투과특성을 조사하였다. 막중 PLG 알칼리 금속염의 helix 형성거동에 있어 대이온 선택성은 Li>Na>K>Cs의 순으로 관찰되었고, 이와 같은 특이성은 탈용매화 에너지와 정전에너지의 감소에 따른 고분자 하전기와 대이온과의 contact ion-pair 형성에 의한 것으로 설명하였다. 또한 PLGA/PVA 블렌드막의 ethanol 수용액 중에서의 알칼리 금속이온의 투과거동을 살펴보면, ethanol 농도가 점차 증가함에 따라 K, Cs의 경우는 투고도가 증가한, Li, Na의 경우에는 감소하였다. K, Cs 이온의 경우 대이온과 염소이온간의 ion-pair (M$^{+}{\cdot}$Cl$^{-}$)형성에 의한 Donnan배제효과의 감소와 중성염 형태로의 분배량 증가때문인 것으로, Li, Na 이온의 경우 막중의 coil-helix 구조전이에 따른 자유체적의 감소와 고분자 하전기와의 상호작용이 증가하여 확산성이 크게 감소하였기 때문인 것으로 생각된다.

• 멤브레인
• /
• 제12권1호
• /
• pp.51-53
• /
• 2002

Poly(vinyl alcohol) (PVA)/sulfosuccinic acid $(SSA)-H^+$ 막은 1가 이온 $Li^+, Na^+,K^ + 2$가 이온 $Mg^{2+}, Ca^{2+},Ba^{2+}, 3$가 이온 $Al^{3+}$로 치환하였다. 또한 $Li^{+}$의 경우 치환도를 화하였다. 금속이온치환의 효과를 알아보기 위하여 Diffusion cell을 이용한 메탄올투과도를 측정하였다. 메탄올투과도를 1가 이온의 경우는 'Salting-out'효과뿐 아니라 electrostatic 가교와 금속 이온의 반응성에 의존한다고 사료되었다. 또한 $Li^+$이온이 경우 치환도에 비례하여 메탄올 투과도가 감소하였는데 이는 'Salting-out'효과에 기인한다고 사료되어진다.

• 한국세라믹학회지
• /
• 제46권6호
• /
• pp.587-591
• /
• 2009

Lithium salt have been used mainly as electrolyte of thermal battery for electricity storage. Recently, The 3phase lithium salt(LiCl-LiF-LiBr) is tried to use as electrolyte of thermal battery for high electric power. It is reported that LiCl-LiF-LiBr salt have high ion mobility due to its high lithium ion concentration. Solid lithium salt is melt to liquid state at above $500{^{\circ}C}$. The lithium ion is easily reacted with support materials. Because the melted lithium ion has small ion size and high ion mobility. For the increasing mechanical strength of electrolyte pellet, the research was started to apply ceramic filter to support of electrolyte. In this study, authors used SiOC web and glass fiber filter as ceramic mat for support of electrolyte and impregnated LiCl-LiF-LiBr salt into ceramic mat at above $500{^{\circ}C}$. The fabricated electrolyte using ceramic mat was washed with distilled water for removing lithium salt on ceramic mat. The washed ceramic mat was observed for lithium ion reaction behavior with XRD, SEM-EDS and so on.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.84.2-84.2
• /
• 2015

Growing market of electric vehicles such as hybrid, plug-in hybrid, and bare electric vehicles in the world is accelerating the significance of Li-ion batteries as a renewable green energy. According to such market flow, the developing components such as cathode, anode, electrolyte, and separator, composing the Li-ion batteries, is significantly important tasks for the commercialization. In particular, development of the cathode material having high capacity and stable thermal stability is essential for long-distance electric vehicle in the near future. Herein we introduce various applications of Li-ion batteries such as portable electronics, electric vehicles, and energy storage system, and also its research trend, in particular on the cathode materials.

• 한국재난정보학회 논문집
• /
• 제18권1호
• /
• pp.163-172
• /
• 2022

연구목적: Li-ion 배터리의 효율적인 열관리 기술을 확보하기 위하여 Single&-phase 침지 냉각 기술을 적용한 시스템의 실험을 통하여 적용가능성을 확인하고자 하였다. 연구방법: LG-Chem에서 생산된 JH3 파우치 셀을 사용하여 14S2P 모듈을 제조하여 미국 카길사에서 생산된 식물성계 냉각유체에 침지한 후 0.3C~1C 속도로 충방전을 시행하여 열분포를 확인하였다. 연구결과: 침지냉각 기술로 배터리 모듈을 40℃ 이하의 온도로 관리할 수 있으며, 침지액의 분자구조 변화가 없다는 결과를 도출하였다. 결론: 침지냉각 방식이 Li-ion 배터리 열관리에 적용 가능함을 확인하였다.

• Journal of Ceramic Processing Research
• /
• 제13권spc1호
• /
• pp.37-41
• /
• 2012

A lithium ion conducting borosilicate glass was fabricated by a conventional melt quenching technique from a mixture of Li2CO3, B2O3 and SiO2 powders. The Li ion conductivity of the lithium borosilicate glasses was evaluated in terms of the SiO2/B2O3 ratio. In the Li2O-B2O3-SiO2 ternary glass, the glass forming region decreases with an increasing Li2O content. At the same Li2O, the crystallization tendency of the glass samples increases with the SiO2/B2O3 ratio, resulting in a reduced glass forming region in the Li2O-B2O3-SiO2 ternary glass. The electrical conductivity moderately depends on the SiO2/B2O3 ratio in the Li2O-B2O3-SiO2 ternary glass. The conductivity of the glasses slightly increases with the SiO2/B2O3 ratio. The observed phenomenon can be explained by the modification of the glass structure as a function of the SiO2 content.

• 한국세라믹학회지
• /
• 제53권6호
• /
• pp.712-718
• /
• 2016

In this study, we investigate the effect of the$Li_3BO_3$ additive on the densification and ionic conductivity of garnet-type $Li_7La_3Zr_2O_{12}$ solid electrolytes for all-solid-state lithium batteries. We analyze their densification behavior with the addition of $Li_3BO_3$ in the range of 2-10 wt.% by dilatometer measurements and isothermal sintering. Dilatometry analysis reveals that the sintering of $Li_7La_3Zr_2O_{12}-Li_3BO_3$ composites is characterized by two stages, resulting in two peaks, which show a significant dependence on the $Li_3BO_3$ additive content, in the shrinkage rate curves. Sintered density and total ion conductivity of the system increases with increasing $Li_3BO_3$ content. After sintering at $1100^{\circ}C$ for 8 h, the $Li_7La_3Zr_2O_{12}-8$ wt.% $Li_3BO_3$ composite shows a total ionic conductivity of $1.61{\times}10^{-5}Scm^{-1}$, while that of the pure $Li_7La_3Zr_2O_{12}$ is only $5.98{\times}10^{-6}Scm^{-1}$.

• Applied Microscopy
• /
• 제48권2호
• /
• pp.49-53
• /
• 2018

A successful transmission electron microscope (TEM) analysis is closely related to the preparation of the TEM specimen and should be followed by the suitable TEM specimen preparation depending on the purpose of analysis and the subject materials. In the case of the Si-based anode material, lithium atoms of formed Li silicide were removed due to ion beam and electron beam during TEM specimen preparation and TEM observation. To overcome the problem, we proposed a new technique to make a TEM specimen without the ion beam damage. In this study, two types of test specimens from the Si-based anode material of Li-ion battery were prepared by respectively adopting the only focused ion beam (FIB) method and the new FIB-ultramicrotome method. TEM analyses of two samples were conducted to compare the Ga ion damage of the test specimen.

• 분석과학
• /
• 제11권4호
• /
• pp.231-234
• /
• 1998

$N_3O_3$가 앵커 그룹으로 포함된 이온교환체를 사용하여 $^6Li$와 $^7Li$의 분리인자를 측정하였다. 이온교환체의 이온교환 용량은 2.0 meq/g 이었다. 3M 염화암모늄 수용액을 용리액으로 하였으며, 내경 0.3 cm, 높이 30 cm의 칼럼을 이온교환크로마토그래피에 사용하였다. 가벼운 동위원소 $^6Li$는 유체상에, 무거운 동위원소 $^7Li$는 수지상에 농축되었다. 용리곡선과 동위원소 비를 가지고 Glueckauf의 이론에 따라 분리인자를 구하였으며, 그 값은 1.018이었다.

• 한국재료학회지
• /
• 제29권12호
• /
• pp.774-780
• /
• 2019

The performance of Li-ion hybrid supercapacitors (asymmetric-type) depends on many factors such as the capacity ratio, material properties, cell designs and operating conditions. Among these, in consideration of balanced electrochemical reactions, the capacity ratio of the negative (anode) to positive (cathode) electrode is one of the most important factors to design the Li-ion hybrid supercapacitors for high energy storing performance. We assemble Li-ion hybrid supercapacitors using activated carbon (AC) as anode material, lithium manganese oxide as cathode material, and organic electrolyte (1 mol L^-1 LiPF₆ in acetonitrile). At this point, the thickness of the anode electrode is controlled at 160, 200, and 240 ㎛. Also, thickness of cathode electrode is fixed at 60 ㎛. Then, the effect of negative and positive electrode ratio on the electrochemical performance of AC/LiMn₂O₄ Li-ion hybrid supercapacitors is investigated, especially in the terms of capacity and cyclability at high current density. In this study, we demonstrate the relationship of capacity ratio between anode and cathode electrode, and the excellent electrochemical performance of AC/LiMn₂O₄ Li-ion hybrid supercapacitors. The remarkable capability of these materials proves that manipulation of the capacity ratio is a promising technology for high-performance Li-ion hybrid supercapacitors.