• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.4
• /
• pp.1611-1629
• /
• 2016

Recently, deploying WiFi access points (APs) for facilitating indoor localization has attracted increasing attention. However, most existing mechanisms in this aspect are typically simulation based and further they did not consider how to jointly utilize pre-existing APs in target environment and newly deployed APs for achieving high localization performance. In this paper, we propose a measurement-based AP deployment mechanism (MAPD) for placing APs in target indoor environment for assisting fingerprint based indoor localization. In the mechanism design, MAPD takes full consideration of pre-existing APs to assist the selection of good candidate positions for deploying new APs. For this purpose, we first choose a number of candidate positions with low location accuracy on a radio map calibrated using the pre-existing APs and then use over-deployment and on-site measurement to determine the actual positions for AP deployment. MAPD uses minimal mean location error and progressive greedy search for actual AP position selection. Experimental results demonstrate that MAPD can largely reduce the localization error as compared with existing work.

• The Korean Journal of Physiology
• /
• v.28 no.1
• /
• pp.79-90
• /
• 1994

The objective of the present study is to assess the contribution of bulk flow to the regulatory mechanism of amniotic fluid volume and its ionic concentration in the membranes surrounding the amniotic fluid. For quantitative assessment, we prepared 4 kinds of artificial amniotic fIuids (isotonic isovolumetric, hypotonic isovolumetric, isotonic hypervolumetric and hypotonic hypervolumetric ones) by replacing 70% of amniotic fluid of pregnant rabbits with water or normal Tyrode solutions. Isoosmotic saline of 0.5 ml volume containing 0.05% Censored and 15 mM/l LiCl was administered initially into amniotic sacs of all subject animals. Samples of amniotic fluid were collected in after 30 and 90 minute intervals; the concentrations of Censored, $Na^+\;and\;Li^+$ were determined and compared. Followings are the results obtained. 1. from isovolumetric and increased Congcord group, we couldn't find significant change in $Li^+\;and\;Na^+$ concentration in isotonic amniotic fluid. However, $Na^+$ concentration increased significantly as well as a striking increase in Censored concentration in hypotonic amniotic fluid. 2. In isovoIumetric and decreased Censored group, the rate of $[Li^+]$ decrement and the rate of $[Na^+]$ increment were much higher in hypotonic amniotic fluid than in isotonic. 3. In hypervolumetric and increased Censored group, the rate of $Na^+$ efflux increased proportionately with the increment of Censored concentration up to 0.98, which was higher than the rate of $Li^+$ efflux in isotonic amniotic fluid. However, the increment of $Na^+$ concentration was rather related with the initial $Na^+$ concentration in hypotonic amniotic fluid, showing inverse relationship. $Li^+$ concentration increased only when there was a marked increase in Censored concentration and approached near a maximum value or 1. 4. For hypervolumetric and decreased Censored group, the observations were identical to isovolumetric and decreased Censored group. From these results the following conclusions could be made: 1) There is no net movement of water or monovalent cations across the membranes surrounding amniotic fIuid in isotonic isovolumetric condition. In contrast, there is a net efflux of amniotic fluid by osmotic bulk flow, resulting in elevation of $Na^+$ concentration in hypotonic isovolumetric condition. 2) In hypervolumetric conditions, there is a massive efflux of amniotic fluid or solvent drag through the surrounding membranes by fiItrative bulk flow, where the rate of $Na^+$ efflux has a linear relationship with that of water efflux. This is assumed to be carried out through enlarged and newly opened intercellular spaces resulting from increased intraamniotic pressure. 3) Once increasing intraamniotic pressure reaches a point allowing $Li^+$ to pass through during osmotic bulk flow in hypotonic amniotic fIuid, $Na^+$ influx seems to occur by diffusion simultaneously or immediately thereafter, too.

• Journal of Korean Port Research
• /
• v.13 no.1
• /
• pp.79-86
• /
• 1999

This paper deals with the evaluation problem of complex systems by introducing a fuzzy approach. The authors are functionally supposing a hierarchical structure model of a complex system and give light on the following problems. First for the purpose of clarifying the characteristics of measures the property and differences between two method such as linear and fuzzy viewpoint are discussed through two level-down evaluation process. Second the integrated evaluation process which keeps reversibility between hierarchical levels is discussed and obtained some necessary conditions for reversibility of fuzzy evaluation. From these results it is expected that the fuzzy approach overcomes partly the limitation of reductionism at the hierarchical evaluation of complex systems.

• Information and Communications Magazine
• /
• v.33 no.10
• /
• pp.10-16
• /
• 2016

IEEE 802.15.7 VLC(Visible Light Communication) 규격 이후에 카메라 기반 ISC(Image Sensor Communication) 관련 개정 필요성이 제기되어서 현재 IEEE 802.15.7m OWC(Optical Wireless Communication) TG가 표준화를 진행 중에 있다. 2016년 5월에 결정된 Baseline Document D0를 기반으로 LiFi(Light Fidelity), OCC(Optical Camera Communication) 및 LED-ID(LED Identification) 기술로 간단하게 분류하고 각 핵심 변조 기법을 소개한다. 5세대 이동통신과 함께 사용될 수 있는 다양한 IoT/ M2M 응용 서비스(LED, 디지털사이니지, 방송, 자동차 안전, 디스플레이 등)들이 포함되어 있다. 국내에서 혁신적인 비즈니스 모델 발굴과 국내 산/학/연/관이 협력하여 가시광, 적외선 및 자외선 분야에서 적극적인 연구개발이 있어야 할 것이다.

• KCID journal
• /
• v.8 no.2
• /
• pp.27-34
• /
• 2001

소양강댐 유역의 비점원 오염 포텐셜을 평가하기 위하여 LTHIA/NPS, RUSLE그리고 ArcView GIS 모델을 사용하였다. NPS 오염 포텐셜(VI)계산은 강우유출(RI), 토양유실(EI), 농약사용량(CI), 가축분뇨(LI)와 상업용 비료(FI) 사용량을 대표하는 지수(Index)를 사용하였다. 유역의 유출심은 4.9에서 34.3cm였으며, 토양유실량은 0.25에서 802 ton/ha/year 범위로 평균은 6.46ton/ha/year이었다.

• Current Optics and Photonics
• /
• v.2 no.4
• /
• pp.308-314
• /
• 2018

Visible light communication (VLC) is considered a strong future candidate for indoor wireless communication. However, its performance seems to be relatively unsatisfactory when compared to wireless local area network (WLAN) communication using millimeter waves. To improve the performance of VLC, numerous technologies have been proposed so far, in both electrical and optical domains. Among the proposals, optical beamforming (OB) is an optical-domain technology that can concentrate light in a specific direction or on a target spot. It can significantly improve VLC performance and can be widely used, because it does not depend on electrical modulation schemes. Therefore, this review discusses the concept, principle, and types of OB, the structure of a VLC system using OB, performance results of OB, and the combination of OB with electrical signal modulation in VLC. OB is expected to be one of the key techniques in future VLC implementations, similar to radio-frequency beamforming in millimeter-wave communication.

• Journal of the Speleological Society of Korea
• /
• no.90
• /
• pp.35-56
• /
• 2009

The purpose of this paper is to analyze the implementation of the karst infrastructure systems for the u-cave. IT based u-cave represents spatial information derived fields, such as geographical distribution of the cave boundaries, physical configuration of the cave locations and formation characteristics of the karst history. These three aspects relate to karst infrastructure systems, cave monitoring center and spatial database implementation. In terms of the IT based u-cave infrastructure implementation systems, the u-cave depends on IT contents and spatial features. uIT contents are strongly related to IT839 strategy due to the national agenda is "u-Korea". Cave should contribute to u-cave construction through the spatial analyses methods including USN, RFID, LiDAR, ELD, and GIS technologies. For these methods various cave functions will guide to u-cave's distribution, location, and characteristics of karst. The infrastructure consists of landforms and speleothem facilities, underground related facilities, environmental protection systems, and cave planning. These six units of the cave infrastructures have spatial databases that consist of spatial configuration, such as 4-D in order to draw the spatial distribution of the limestone and lava caves. IT based u-cave system infrastructure implementation should deal with IT convergence to generate fusion affects.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.2
• /
• pp.390-396
• /
• 2015

The drastic growth of mobile communication and spreading of smart phone make the significant attention on Location Based Service. The one of most important things for vitalizations of LBS is the accurate estimating position for mobile object. Focusing on an image sensor deployed in smart phone, we develop a LED based positioning estimation framework. The developed approaches can strengthen the advantages of independent indoor applicability of LED. The estimation of LED based positioning is effectively applied to any indoor environment. We put a focus especially on the algorithmic framework. of image processing of smart phone. From LED lighting, we can obtain a typical signal image which contains the unique positioning information. Furthermore test-bed based on smart phone platform is practically developed and all data have been harvested from the actual measurement of test indoor area. This can approve the practical usefulness of proposed framework.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.603-605
• /
• 2021

With the expansion of the indoor service-providing robot market and the electrification of automobiles, research on autonomous driving is being actively conducted. In general, in the case of outside, the location is mainly recognized through GPS, and location positioning is performed indoors using technologies such as WiFi, UWB (Ultra-Wide Band), VLP, LiDAR, and Vision. In this paper, we introduce a system for location-positioning using LED lights with different color temperatures in an indoor environment. After installing LED lights in a simulated environment such as a tunnel, it was shown that information about the current location can be obtained through the analysis of chromaticity values according to location. Through this, it is expected to be able to obtain information about the location of the vehicle in the tunnel and the movement of the device in a room such as a warehouse or a factory.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.5
• /
• pp.395-401
• /
• 2018

Recently, most of mobile devices are equipped with GNSS (Global Navigation Satellite System). When the GNSS signal is available, it is easy to obtain position information. However, GNSS is not suitable solution for indoor localization, since the signals are normally not reachable inside buildings. A wide varieties of technology have been developed as a solution for indoor localization such as Wi-Fi, beacons, and inertial sensor. With the increased sensor combinations in mobile devices, mobile devices also became feasible to provide a solution, which based on PDR (Pedestrian Dead Reckoning) method. In this study, we utilized the combination of three sensors equipped in mobile devices including accelerometer, digital compass, and gyroscope and applied three representative PDR methods. The proposed methods are done in three stages; step detection, step length estimation, and heading determination and the final indoor localization result was evaluated with terrestrial LiDAR (Light Detection And Ranging) data obtained in the same test site. By using terrestrial LiDAR data as reference ground truth for PDR in two differently designed experiments, the inaccuracy of PDR methods that could not be found by existing evaluation method could be revealed. The firstexperiment included extreme direction change and combined with similar pace size. Second experiment included smooth direction change and irregular step length. In using existing evaluation method which only checks traveled distance, The results of two experiments showed the mean percentage error of traveled distance estimation resulted from three different algorithms ranging from 0.028 % to 2.825% in the first experiment and 0.035% to 2.282% in second experiment, which makes it to be seen accurately estimated. However, by using the evaluation method utilizing terrestrial LiDAR data, the performance of PDR methods emerged to be inaccurate. In the firstexperiment, the RMSEs (Root Mean Square Errors) of x direction and y direction were 0.48 m and 0.41 m with combination of the best available algorithm. However, the RMSEs of x direction and y direction were 1.29 m and 3.13 m in the second experiment. The new evaluation result reveals that the PDR methods were not effective enough to find out exact pedestrian position information opposed to the result from existing evaluation method.