• International Journal of Precision Engineering and Manufacturing-Green Technology
• /
• 제5권5호
• /
• pp.583-591
• /
• 2018

Tool-chip adhesion impacts on cutting performance significantly, especially in finish cutting process. To promote cutting tools' anti-adhesion property, the concave micro-grooves texture (MGT) and convex volcano-like texture (VLT) were fabricated separately on lathe tools' rake faces by laser surface texturing (LST). Various orientations of MGT and different area densities (9% and 48%) and regions (partial and full) of VLT were considered in textured patterns designing. The following orthogonal cutting experiments, machining of aluminum alloy 5038, analyzed tools' performances including cutting force, cutting stability, chip shape, rake face adhesion and abrasion. It indicated that under dry finish cutting conditions, MGT contributed to cutting stability and low cutting forces, meanwhile friction and normal force reduced by around 15% and 10%, respectively with a weak correlation to the grooves' orientation. High density VLT tools, on the other hand, presented an obvious anti-adhesion property. A $5{\mu}m$ reduction of crater wear's depth can be observed on textured rake faces after long length cutting and textured rake faces presented half size of BUE regions comparing to the flat tool, however, once the texture morphologies were filled or worn, the anti-adhesion effect could be invalid. The bearing ratio curve was employed to analysis tool-chip contact and durability of textured surfaces contributing to a better understanding of anti-adhesion and enhanced durability of the textured tools.

• Wind and Structures
• /
• 제29권3호
• /
• pp.163-175
• /
• 2019

Multispan suspension bridges make a good alternative to single-span ones if the crossed strait or river width exceeds 2-3 km. However, multispan three-tower suspension bridges are found to be very sensitive to the wind load due to the lack of effective longitudinal constraint at their central tower. Moreover, at certain critical wind speed values, the aerostatic instability with sharply deteriorating dynamic characteristics may occur with catastrophic consequences. An attempt of an in-depth study on the aerostatic stability mode and damage mechanism of three-tower suspension bridges is made in this paper based on the assessment of strain energy and dynamic characteristics of three particular three-tower suspension bridges in China under different wind speeds and their further integration into the aerostatic stability analysis. The results obtained on the three bridges under study strongly suggest that their aerostatic instability mode is controlled by the coupled action of the anti-symmetric torsion and vertical bending of the two main-spans' deck, together with the longitudinal bending of the towers, which can be regarded as the first-order torsion vibration mode coupled with the first-order vertical bending vibration mode. The growth rates of the torsional and vertical bending strain energy of the deck after the aerostatic instability are higher than those of the lateral bending. The bending and torsion frequencies decrease rapidly when the wind speed approaches the critical value, while the frequencies of the anti-symmetric vibration modes drop more sharply than those of the symmetric ones. The obtained dependences between the critical wind speed, strain energy, and dynamic characteristics of the bridge components under the aerostatic instability modes are considered instrumental in strength and integrity calculation of three-tower suspension bridges.

• Steel and Composite Structures
• /
• 제30권5호
• /
• pp.405-416
• /
• 2019

Profiled composite slab has been widely used in civil engineering due to its structural merits. The extension of this concept to the bearing wall forms the profiled composite wall, which consists of two external profiled steel plates and infill concrete. This paper investigates the structural behavior of this type of wall under axial compression. A series of compression tests on profiled composite walls consisting of varied types of profiled steel plate and edge confinement have been carried out. The test results are evaluated in terms of failure modes, load-axial displacement curves, strength index, ductility ratio, and load-strain response. It is found that the type of profiled steel plate has influence on the axial capacity and strength index, while edge confinement affects the failure mode and ductility. The test data are compared with the predictions by modern codes such as AISC 360, BS EN 1994-1-1, and CECS 159. It shows that BS EN 1994-1-1 and CECS 159 significantly overestimate the actual compressive capacity of profiled composite walls, while AISC 360 offers reasonable predictions. A method is then proposed, which takes into account the local buckling of profiled steel plates and the reduction in the concrete resistance due to profiling. The predictions show good correlation with the test results.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제11권1호
• /
• pp.396-408
• /
• 2019

The tubes which are applied in jacket platforms as the supporting structure might be collided by supply vessels. Such kind of impact will lead to plastic deformation on tube members. As a result, the ultimate strength of tubes will decrease compared to that of intact ones. In order to make a decision on whether to repair or replace the members, it is crucial to know the residual strength of the tubes. After being damaged by lateral impact, the simply supported tubes will definitely loss a certain extent of load carrying capacity under uniform axial compression. Therefore, in this paper, the relationship between the residual ultimate strength of the damaged circular tube by collision and the energy dissipation due to lateral impact is investigated. The influences of several parameters, such as the length, diameter and thickness of the tube and the impact energy, on the reduction of ultimate strength are investigated. A series of numerical simulations are performed using nonlinear FEA software LS-DYNA. Based on simulation results, a non-dimensional parameter is introduced to represent the degree of damage of various size of tubes after collision impact. By applying this non-dimensional parameter, a simplified formula has been derived to describe the relationship between axial compressive residual ultimate and lateral impact energy and tube parameters. Finally, by comparing with the allowable compressive stress proposed in API rules (RP2A-WSD A P I, 2000), the critical damage of tube due to collision impact to be repaired is proposed.

• Asian-Australasian Journal of Animal Sciences
• /
• 제32권6호
• /
• pp.783-791
• /
• 2019

Objective: This study was to evaluate the fermentation dynamics, structural and nonstructural carbohydrate composition and in vitro gas production of rice straw ensiled with lactic acid bacteria and molasses. Methods: Fresh rice straw was ensiled in 1-L laboratory silos with no additive control (C), Lactobacillus plantarum (L), molasses (M) and molasses+Lactobacillus plantarum (ML) for 6, 15, 30, and 60 days. After storage, the silages were subjected to microbial and chemical analyses as well as the further in vitro fermentation trial. Results: All additives increased lactic acid concentration, and reduced pH, dry matter (DM) loss and structural carbohydrate content relative to the control (p<0.05). The highest organic acid and residual sugar contents and lignocellulose reduction were observed in ML silage. L silage had the highest V-score with 88.10 followed by ML silage. L and ML silage improved in vitro DM digestibility as compared with other treatments, while in vitro neutral detergent fibre degradability (IVNDFD) was increased in M and ML silage (p<0.05). M silage significantly (p<0.05) increased propionic acid (PA) content and decreased butyric acid content and acetic acid/PA as well as 72-h cumulative gas production. Conclusion: The application of ML was effective for improving both the fermentation quality and in vitro digestibility of rice straw silage. Inclusion with molasses to rice straw could reduce in vitro ruminal gas production.

• 한국산학기술학회논문지
• /
• 제19권12호
• /
• pp.600-606
• /
• 2018

금속화재는 나트륨(Na), 리튬(Li) 등과 같은 가연성 금속이 연소하는 화재이다. 일반적인 물계, 가스계 소화약제에는 적응성이 없으며 금속화재용 소화약제 또는 건조사로 화재를 진화할 수 있다. 위험물안전관리법상 가연성 금속에 속하는 2류 및 3류 위험물 화재가 최근 5년간 104건이 발생했으며, 가연성 금속을 사용하는 연료전지, 반도체 산업의 발전으로 화재 건수는 더욱 증가할 것으로 예상되고 있다. 하지만 국내에는 금속화재와 관련된 법적 기준이 마련되어 있지 않아 금속화재용 소화약제 및 소화기 개발은 물론 화재 예방 및 대응 시스템 구축이 이루어지지 않고 있다. 이에 본 연구에서는 금속화재의 위험성을 감소시킬 수 있는 방안을 마련하기 위해 국내외 관련 법령 분석 및 금속화재 사례 11건을 분석하였다. 이를 통해 금속화재의 위험성을 감소를 위해 관련 법령 마련에 필요한 요소를 도출하였으며 금속화재 발생 시 소화약제로 사용되고 있는 건조사의 관리 및 지원방안을 제시하였다. 또한, 금속화재의 예방 및 대응에 필요한 안전교육 및 시설 관리 방안을 제시하였다.

• 무역학회지
• /
• 제44권2호
• /
• pp.109-126
• /
• 2019

Import refusals can be considered a new method of non-tariff barriers. This study aims to analyze reputation spillover effects on fish and fishery products imported from ASEAN countries to the U.S. FDA. The supply of aquatic products is not stable due to various factors such as reduction of fish stocks and climate change. Fish is a basic food ingested directly, but there are many ways to control the safety of aquatic products. ASEAN countries account for about 20% of U.S.imports in fish and fishery products. For Southeast Asian countries, fish and fishery products comprise a high proportion of exports revenue. Despite the large share of exports to the U.S., Southeast Asia countries have been receiving many import refusals from the United States. In this study, a theoretical model for examining import refusals is suggested using the negative binomial counting process. The reputation spillover effect, was divided into two spillover effects of 'neighbor reputation' and 'sector reputation'. Results show that there exists a neighbor reputation spillover effect. It can be said if there was a import refusal of the same product from neighboring countries in the preceding year, the home country have a possibility to experience import refusals of the same product. Therefore, it is interpreted that neighboring countries have good standard compliance can help home countries to effectively reach the target markets. Our findings have a important policy implication for ASEAN exporters of fish and fishery products.

• 한국지반환경공학회 논문집
• /
• 제12권10호
• /
• pp.51-56
• /
• 2011

본 연구에서는 스케일형성 제어와 막 파울링 저감을 위한 펄스 전기장 처리의 적용성을 실험적으로 검토하였다. 수용액 중의 칼슘이온 78%가 감소되었으며, $CaCO_3$입자의 크기는 커지는 것으로 확인되었다. 또한, $CaCO_3$의 결정형태는 비교적 제거가 힘든 Aragonite 구조에서 비교적 제거가 쉬운 Calcite 구조로 변화됨을 알 수 있었다. 막투과 유량과 막투과 유속은 펄스 전기장처리전에 비하여 더 높게 나타났으며, 스케일형성 가능성지수인 LI값 역시 감소하는 경향을 나타내었다. 결과로부터 펄스 전기장처리가 막 여과의 전처리로써 $CaCO_3$파울링을 경감시키기 위한 효과적인 방법으로 판단된다.

• Korean Journal of Chemical Engineering
• /
• 제35권11호
• /
• pp.2172-2184
• /
• 2018

The production of isophthalic acid (IPA) from the oxidation of m-xylene (MX) by air is catalyzed by $H_3PW_{12}O_{40}$ (HPW) loaded on carbon and cobalt. We used $H_2O_2$ solution to oxidize the carbon to improve the catalytic activity of HPW@C catalyst. Experiments reveal that the best carbon sample is obtained by calcining the carbon at $700^{\circ}C$ for 4 h after being impregnated in the 3.75% $H_2O_2$ solution at $40^{\circ}C$ for 7 h. The surface characterization displays that the $H_2O_2$ modification leads to an increase in the acidic groups and a reduction in the basic groups on the carbon surface. The catalytic capability of the HPW@C catalyst depends on its surface chemical characteristics and physical property. The acidic groups play a more important part than the physical property. The MX conversion after 180 min reaction acquired by the HPW@C catalysts prepared from the activated carbon modified in the best condition is 3.81% over that obtained by the HPW@C catalysts prepared from the original carbon. The IPA produced by the former is 46.2% over that produced by the latter.

• Computers and Concrete
• /
• 제26권6호
• /
• pp.547-563
• /
• 2020

In this paper, the influence of axial compression ratio on the mechanical properties of new type joints of side span of rectangular concrete-filled steel tubular column-H-type steel beam is studied. Two new types of side-span joints of rectangular concrete-filled steel tubular column-H-type steel beam are designed and quasi-static tests of five new type joints with 1:2 scale reduction ratios are performed. The axial compression ratio of joint JD1 is 0.3, 0.4 and 0.5, and the axial compression ratio of joint JD2 is 0.3 and 0.5. In the joint test, different axial forces were applied to the top of the column according to different axial compression ratios, and low-cyclic reciprocating load was applied on the beam. The stress and strain distribution, beam and column deformation, limit state, failure process, failure mechanism, stiffness degradation, ductile deformation and energy dissipation capacity of the joint were measured and analyzed. The results show that: with the increase of axial compression ratio, the ultimate bearing capacity of the joint decreases slightly, the plastic deformation decreases, and the stiffness and ductility decrease. According to the energy dissipation curve of the specimen, the equivalent damping coefficient also increases with the increase of axial compression ratio in a certain range, indicating that the increase of axial compression ratio can improve the seismic performance of the joint to a certain extent. The finite element method is used to simulate the joint test, and the test results are in good agreement with the simulation results.