• 청정기술
• /
• 제30권1호
• /
• pp.23-27
• /
• 2024

Bismuth는 적절한 작동 전압(0.8 V)과 높은 체적 용량(3,765 mAh cm^-3) 때문에 Li-ion battery (LIBs)의 유망한 음극소재로 여겨진다. 그럼에도 불구하고 Bi의 Li과의 합금화 반응 중 필연적인 부피 팽창은 심각한 용량 손실과 셀 파괴를 초래한다. 이를 해결하기 위해 본 논문에서는 N이 도핑된 탄소에 내장된 비스무트 합금 나노 입자(Bi@NC)의 복합체를 간단한 열분해 방법을 통해 제조하였다. 나노 크기의 Bismuth 합금은 단축된 Li⁺ 이온 확산 경로를 통해 반응 동역학을 향상시킬 수 있다. 또한, N 도핑된 탄소 코팅은 Li⁺ 이온과의 확장된 합금/탈 합금 반응 동안 Bismuth의 부피 변화를 효과적으로 완충하고 효과적인 전도성 네트워크를 유지한다. 열 중량 분석한 결과 매우 높은 Bismuth 합금 로딩(80.9 wt%)을 보여줬음에도 불구하고 100 cycles까지 315 mAh g^-1 용량을 유지하였다.

• 한국세라믹학회지
• /
• 제41권1호
• /
• pp.86-91
• /
• 2004

기계 화학법에 의해서 70-300nm 수준의 입도 분포를 갖는 $LiCoO_2$ 양극 분말을 제작하였다. $K_2SO_4$에 의하여 코팅 된 Li-Co 전구체는 약 $800^{\circ}C$에서 고온상 $LiCoO_2$로 결정화 되었으며, 이때 이 온도까지는 열분해 또는 서로 반응을 하지 않는 $K_2SO_4$의 영향에 의하여 분말의 입성장이 억제되어 나노 크기에 접근하는 입자를 얻을 수 있었고, 상대적으로 큰 표면 에너지에 기인하여 입자의 모양이 구형에 가깝게 형성되어 졌다. 합성돤 분말은 상용화 분말과 동일한 결정특성을 보였으나 , 투과전자현미경의 회절패턴 분석결과, 층상 뿐 아니라 부분적으로 정방정의 $LiCoO_2$ 상을 갖는 것으로 나타났다. 이러한 정방정은 주로 입자 표면에 존재하게 되어 Li의 확산을 용이하지 않게 하므로, 합성된 $LiCoO_2$ 분말은 그 크기가 나노에 접근함에도 불구하고 전체 용량 및 rate 용량이 상용화 분할보다 더 낮은 값을 보였다. 이상의 결과로부터 뛰어난 고출력 및 고성능의 전지 제작을 위하여 분말의 크기를 미세화하는 작업은 물론 입자 표면의 결정상이 잘 조절된 분말을 사용하는 것이 바람직함을 알 수 있다.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1996년도 춘계 총회 및 학술발표회
• /
• pp.34-35
• /
• 1996

The diffusional behavior of many non-solvents in glassy or semicrystalline polymers cannot be adequately described by a concentration-dependent form of Fick's law, especially when mass transfer is coupled with structural changes. Many mathematical models have been devised to interprete non-Fickian diffusion dominated by relaxation kinetics. In formulation of non-Fickian diffusion mathematics, therefore, the most important factor to consider is how relaxation effects can influence the governing constitutive equation and boundary conditions. That is, relaxation parameters can be accommodated by variable boundary conditions or a modified continuity equation, or both, depending on specific systems and conditions (Frish, 1980). Accoring to Astarita and Nicolais (1983), the model equations can be broadly categorized as continuous or discontinuous. Continuous model equations encompass phenomena where the structural change takes place gradually over the whole volume of the polymer sample (Crank, 1953; Long and Richman, 1961; Berens and Hopfenberg, 1978). On the other hand, discontinuous model equations deal with the phenomena where the morphological change appears to be abrupt (Li, 1984). Four mathematical models with different relaxation parameters were applied to fit the anomalous sorption data observed in fluoropolymers (PVDF, ECTFE). The fitted result for PVDF-benzene sorption data is shown in Fig. 1.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제17권1호
• /
• pp.165-184
• /
• 2023

The ARX-based lightweight block cipher is widely used in resource-constrained IoT devices due to fast and simple operation of software and hardware platforms. However, there are three weaknesses to ARX-based lightweight block ciphers. Firstly, only half of the data can be changed in one round. Secondly, traditional ARX-based lightweight block ciphers are static structures, which provide limited security. Thirdly, it has poor diffusion when the initial plaintext and key are all 0 or all 1. This paper proposes a new dynamic ARX-based lightweight block cipher to overcome these weaknesses, called DABC. DABC can change all data in one round, which overcomes the first weakness. This paper combines the key and the generalized two-dimensional cat map to construct a dynamic permutation layer P1, which improves the uncertainty between different rounds of DABC. The non-linear component of the round function alternately uses NAND gate and AND gate to increase the complexity of the attack, which overcomes the third weakness. Meanwhile, this paper proposes the round-based architecture of DABC and conducted ASIC and FPGA implementation. The hardware results show that DABC has less hardware resource and high throughput. Finally, the safety evaluation results show that DABC has a good avalanche effect and security.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.225-225
• /
• 2016

PHOLED devices which have the structure of ITO/HAT-CN(5nm)/NPB(50nm)/EML(47nm)/TPBi(10nm)/Alq3(20nm)/LiF(0.8nm)/Al(100nm) are fabricated to investigate the diffusion length of the triplet exciton by using double-quantum-well(DQE) EML structure. To fabricate DQW structures, Ir(ppy)3(2% wt) and Ir(btp)2(8% wt) are used as green and red emission zones, respectively. In DQW structured EML, as shown in Fig. 1, 1nm thick layers of green and red emission zones are located middle of the EML, and the distance between these wells(x) is changed from 0nm to 10nm. As shown in Fig. 2, the emission spectra from DQW PHOLED devices are changed with different x. The intensity of the green emission(520nm) is decreased when x is decreased, and it goes to near zero when x=0nm. This behavior can be identified as the diffusion of the triplet excitons from Ir(ppy)3 to Ir(btp)2 by the Dexter energy transfer(DET). From the external quantum efficiency(EQE) of the red emission, as shown in Fig. 3, the diffusion length of the triplet excitons can be determined by the equation of DET rate, R=A Exp(-2RDA/L), where RDA is donor-acceptor distance and L is the sum of the van der Wals radii. As a result, the measured data of the red EQEs with different x are identified to theoretical result from the equation of DET rate(Fig. 4). From this results, we could confirm that the diffusion length of the triplet excitons can be determined by using DQW structure and this method is very useful to investigate the behavior of the excitons in PHOLEDs.

• 한국전산구조공학회논문집
• /
• 제26권6호
• /
• pp.409-413
• /
• 2013

본 논문에서는 배터리 전극 해석을 위한 응력-확산 완전 연계 멀티스케일 해석기법을 고안하였다. 제안된 방법에서는 먼저 리튬농도에 따른 확산계수 및 기계적 물성을 계산하였다. 이를 고려하여 확산에 의한 응력뿐만 아니라 응력에 의한 확산 거동 변화까지 모두 고려한 응력-확산 완전연계 연속체 모델을 유한요소 기반으로 구성하였다. 이를 통해 실리콘 나노와이어 음극의 충/방전 전산 모사를 수행하였다. 이러한 해석결과를 통하여 기존의 확산에 의한 응력 연속체 모델보다 더 실제와 가까운 해석결과를 제안된 방법이 보여줌을 확인할 수 있었다.

• Asian Pacific Journal of Cancer Prevention
• /
• 제16권14호
• /
• pp.6135-6140
• /
• 2015

Background: The aim of this meta-analysis was to assess the efficacy of the apparent diffusion coefficient (ADC) value of diffusion-weighted MRI (DWI) for differentiating biliary tract cancer (BTC) from benign biliary tract diseases in Asians. Materials and Methods: We systematically searched Embase and PubMed prior to December 2014. Eight studies conducted in Asians met our predetermined inclusion criteria. Results: Our meta-analysis results showed that ADC values in BTC tissues were significantly lower than in benign biliary tract tissues (SMD = -1.54, 95%CI: -1.75~-1.33, P<0.001). Subgroup analysis based on the MRI machine type showed that the ADC values were consistent, accurate and reliable in the diagnosis of BTC when comparing cancer tissue vs. benign tissue under the Siemens 1.5 T/3.0 T, Philips 1.5 T/3.0 T, GE 1.5 T, and Toshiba 1.5 T types, respectively (all P<0.05). Further, ADC values were still consistent and accurate in the differential diagnosis of BTC under the b value of 800 and $1000s/mm^2$ (all P<0.05). Conclusions: Our findings supported potential clinical applications of DWI ADC values in differentiating BTC from benign biliary tract diseases in Asians.

• 대한산업공학회지
• /
• 제23권3호
• /
• pp.545-557
• /
• 1997

This paper deals with dynamic optimal pricing for new products by a firm which maximizes the discounted profit stream of it's own in a duopoly. The problem is constructed as differential games and dynamic optimization theory. Cost is assumed to decline as time goes on. A modified customer's choice model is formulated as a diffusion model and we solve a dynamic optimization problem by adopting the diffusion model. Since this paper focus on deriving real prices not showing a time trend, we formulate recursive form equations of costate variables(shadow price) and a simultaneous equation of price. Hence we derive a dynamic optimal pricing model for using in real market. In particular, we construct a dynamic optimal pricing model in the case that there are benefits from not only new subscribers but also previous subscribers. We analyze instant camera market in U.S.A(1976-1985) by utilizing the above model.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1992년도 추계학술대회 논문집
• /
• pp.106-109
• /
• 1992

In this study, a single optical modulator which is fabricated on X-cut $LiNbO_3$ substrate by using proton exchange method is described. It is well-known that the proton exchange method is characterized by index change of the single optical modulator. As a results, it is found that the single optical waveguide varied widely with controlling diffusion process. The diffusion process was used to optimize the fabrication of the single optical modulator. On the other hand, the process was used to provide another performance improvement and it reduced the fabrication process.

• 한국표면공학회지
• /
• 제26권4호
• /
• pp.183-191
• /
• 1993

Diffusion coating(metalliding) of aluminium on steel from molten fluorides(29.2wt.% LiF-11.7wt.% NaF-59.1wt.% KF, FLINAK) was studied. The electrolytic cell consists of a steel cathode and a consumable aluminium anode. Effects of manganese on the aluminium deposition were also investigated. The quality of the deposit was analyzed by SEM, OM, EPMA, EDXA, and also examined by means of Micro-Vickers hardness and corrosion tests. Deposit layer was identified as an aluminium-rich iron alloy caused by diffusion process. The optimum condition for the metalliding was found to be the current density, 50 to $150mA/\textrm{cm}^2$, the bath tem-perature, $57.5^{\circ}C$, and the amount of AlF3, 10wt.%. Addition of manganese fluoride (up to 5wt.%) as a co-de-posit element improved significantly the quality of the deposit layer.