• Journal of Biosystems Engineering
• /
• v.32 no.1 s.120
• /
• pp.6-12
• /
• 2007

This study was conducted to investigate the drying characteristics of oak mushroom using stationary far-infrared dryer. Drying characteristics was measured at drying air velocity 0.4 to 0.6 m/s and drying temperature 50, 60, and 70$^{\circ}C$, respectively. With high temperature of far-infrared heater and fast air velocity, the far-infrared drying rate of double air flow system was better than conventional heated-air drying as much as 39%. The value of color difference (E) of oak mushroom before and after drying was 8.95 by using heated air drying and was in the range of 3.76$\sim$6.98 by the far-infrared drying. The shrinkage rate of oak mushroom after heated air drying was higher than that of air velocity, 0.6 m/s of far-infrared drying conditions, and was lower than that of air velocity, 0.4 m/s of far-infrared drying conditions. The content of free amino acid was higher in far-infrared drying than heated air drying.

• Analytical Science and Technology
• /
• v.8 no.4
• /
• pp.793-798
• /
• 1995

A new chromoionophore sym-(decyl)(2-hydroxy-5-nitrobenzyloxy)-dibenzo-16-crown-5 (1) has been synthesized for $Na^+$ photometry in aqueous media. Apparent $pK_a$ values of 1 in the presence of 0.10 M LiCl, NaCl, and KCl were measured by spectrophotometry in 50% 1,4-dioxane-50% water (v/v) and compared with the $pK_a$ of 8.68 in the presence of 0.10 M TMACl. A significant $pK_a$ shift to a lower pH was only observed for $Na^+$ (${\Delta}pH=1.31$) due to selective binding of 1 with $Na^+$. Based upon this $pK_a$ shift, chromoionophore 1 was found to selectively respond to $Na^+$ with a detection limit of $10^{-3}M$ and no interference from $K^+$ up to 0.05 M for detection of 10.0 mM $Na^+$ in 50% 1,4-dioxane-50% water (v/v).

• Fisheries and Aquatic Sciences
• /
• v.19 no.2
• /
• pp.11.1-11.7
• /
• 2016

In this study, purified peptides from shrimp waste hydrolysates (SWHs) were examined for their inhibitory effects against ${\beta}$-secretase. During consecutive purification using a Sephadex G-25 column chromatography and high performance liquid chromatography on a C18 column, a potent ${\beta}$-secretase inhibitory peptide Asp-Val-Leu-Phe-His (629 Da) was isolated and identified from SWH24 by Q-TOF MS/MS and the $IC_{50}$ value was determined to be $92.70{\mu}M$. The ${\beta}$-secretase inhibition patterns of the purified peptides were found to be competitive. Among synthesized ${\beta}$-secretase inhibitory peptides, Leu-Phe-His had higher ${\beta}$-secretase inhibitory activity than the others. The result of this study suggests that the ${\beta}$-secretase inhibitory peptide derived from SWH24 could be potential candidates to develop nutraceuticals and pharmaceuticals.

• The Korean Journal of Physiology and Pharmacology
• /
• v.18 no.4
• /
• pp.327-331
• /
• 2014

In this study we investigated the effects of fucoidan on the proliferation of fibroblasts and the reconstruction of a skin equivalent (SE). Fucoidan significantly stimulated the proliferation of CCD-25Sk human fibroblasts and Western blot analysis demonstrated that fucoidan markedly increased the expression of cyclin D1 and decreased the expression of p27. Fucoidan was used to reconstruct SE. Immunohistochemical staining showed that the addition of fucoidan to dermal equivalents increased expression of proliferating cell nuclear antigen (PCNA) and p63. In addition, expression of ${\alpha}6$-integrin was significantly increased by fucoidan, whereas expression of ${\beta}1$-integrin, type 1 collagen, elastin, fibronectin did not markedly change. These results suggest that fucoidan has positive effects on epidermal reconstruction and will therefore be beneficial in the reconstruction of SE.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.6
• /
• pp.511-514
• /
• 2008

2-wavelength type white OLED devices have been made consisted of two layers; a layer with blue light emitting DPVBi host and other EML layer with yellow emitting rubrene dopant. New method to get white emitting device has been suggested by varying thicknesses of the DPVBi layer. The ITO/2-TNATA($150{\AA}$)/NPB($350{\AA}$)/DPVBi($35{\AA}$)/DPVBi:rubrene (2wt%,$200{\AA}$)/DPVBi($100{\AA}$)/Alq_3($50{\AA}$)/LiF($5{\AA}$)/Al($1000{\AA}$) structure has showed optimum results in CIE coordinates of (0.3233, 0.33). OLED devices with this structure has properties of $1.2d/m^2$ at turn-on voltage of 3.9V and $1037cd/m^2$ at 7.9V. This structure has advantages of simple fabrication and easy to emit the white color.

• Structural Engineering and Mechanics
• /
• v.17 no.5
• /
• pp.655-670
• /
• 2004

This paper aims to evaluate the effect of typhoons on fatigue damage accumulation in steel decks of long-span suspension bridges. The strain-time histories at critical locations of deck sections of long-span bridges during different typhoons passing the bridge area are investigated by using on-line strain data acquired from the structural health monitoring system installed on the bridge. The fatigue damage models based on Miner's Law and Continuum Damage Mechanics (CDM) are applied to calculate the increment of fatigue damage due to the action of a typhoon. Accumulated fatigue damage during the typhoon is also calculated and compared between Miner's Law and the CDM method. It is found that for the Tsing Ma Bridge case, the stress spectrum generated by a typhoon is significantly different than that generated by normal traffic and its histogram shapes can be described approximately as a Rayleigh distribution. The influence of typhoon loading on accumulative fatigue damage is more significant than that due to normal traffic loading. The increment of fatigue damage generated by hourly stress spectrum for the maximum typhoon loading may be much greater than those for normal traffic loading. It is, therefore, concluded that it is necessary to evaluate typhoon induced fatigue damage for the purpose of accurately evaluating accumulative fatigue damage for long-span bridges located within typhoon prone regions.

• Journal of Mushroom
• /
• v.11 no.3
• /
• pp.117-123
• /
• 2013

Hot water soluble extract was prepared from Hericium erinaceus and its neuritogenic activity on PC12h cells was analyzed, which is a clone originating from a rat pheochromocytomon. The moisture content of freeze dried hot water extract was 12.08%. The extract was mainly composed of carbohydrate (51.24%) followed by crude protein (24.04%), crude fat (0.26%), dietary fiber (5.09), and ash (12.18%). Fatty acids, glucan and inorganic constituents were found as minor components. The neuritogenic activity of hot water extract was evaluated under microscopic observation of neurite outgrowth in PC12h cells and by measuring the neurite length of induvidual cell. The extract exhibited strong effect of neurite outgrowth in a dose-dependent manner from 0.01 mg/mL to 1 mg/mL, in which longer neurite outgrowth was observed as the treatment dose increased.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.67-67
• /
• 2019

내성천은 경북 북부지역을 흐르는 모래하천으로 계절적 변동이 큰 수문학적 특성에 반응하여 발달하는 모래 하상의 역동성과 이른바 '화이트리버'라고 하는 경관상 고유성이 대표적인 하천이다. 하지만, 2010년부터 영주댐이 건설되기 시작하였고, 2015년 전후로 식생이 광범위하게 활착하는 등 하천 변화가 발생하였다. 본 연구에서는 이러한 변화를 객관적으로 분석하기 위해 영주댐 하류내성천을 대상으로 장기 모니터링을 실시하였으며 이 논문은 2012~2018년 기간에 대해 기상 수문 수질, 하도 형태, 하천 지형 및 식생 등 다각적인 측면의 조사 자료를 제공하는데 그 목적이 있다. 조사 방법으로는 자료 수집, 수위계 운영, 드론/지상 사진 촬영, LiDAR 항공측량, 현장 조사 등을 포함되었다. 장기 모니터링을 통해 발견한 주요한 사실들은 다음과 같다. 2015년은 1982년 다음으로 심한 가뭄이 발생하였으며 이로 인해 여름철 첨두유량은 50년래 최저를 기록하였다. 내성천 하도의 식생 활착은 1987년부터 시작되었으며, 2013년 이전에는 하류 구간에서, 그 이후로는 전체 구간에서 식생 활착이 발생하였다. 그 중 일부 지점은 홍수로 인해 재나지화 되었으나 여러구간은 목본이 활착하였고, 퇴적으로 인해 하도의 형태 변화가 발생하기도 하였다. 내성천은 모래 하상의 본질적 특성을 유지해 왔지만, 최근 약간의 조립화 경향이 나타났으며, 조사 단면에서 최심하상의 저하가 관찰되었다. 조사 결과를 종합하여 볼 때, 내성천에 나타난 변화는 주로 가뭄에 의한 것임을 확인하였다. 이와 함께 영주댐이 하도 변화에 미친 영향에 대해 고찰하였다.

• Structural Engineering and Mechanics
• /
• v.19 no.3
• /
• pp.261-279
• /
• 2005

The hot spot stress approach is usually adopted in the fatigue design and analysis of tubular welded joints. To apply the hot spot stress approach for fatigue evaluation of long span suspension bridges, the FEM is used to determine the hot spot stress of critical fatigue location. Using the local finite element models of the Tsing Ma Bridge, typical joints are developed and the stress concentration factors are determined. As a case for study, the calculated stress concentration factor is combined with the nominal representative stress block cycle to obtain the representative hot spot stress range cycle block under traffic loading from online health monitoring system. A comparison is made between the nominal stress approach and the hot spot stress approach for fatigue life evaluation of the Tsing Ma Bridge. The comparison result shows that the nominal stress approach cannot consider the most critical stress of the fatigue damage location and the hot spot stress approach is more appropriate for fatigue evaluation.

• Wind and Structures
• /
• v.17 no.4
• /
• pp.419-433
• /
• 2013

This paper investigates the vertical profiles of horizontal mean wind speed and direction based on the synchronized measurements from a Doppler radar profiler and an anemometer during 16 tropical cyclones at a coastal site in Hong Kong. The speed profiles with both open sea and hilly exposures were found to follow the log-law below a height of 500 m. Above this height, there was an additional wind speed shear in the profile for hilly upwind terrain. The fitting parameters with both the power-law and the log-law varied with wind strength. The direction profiles were also sensitive to local terrain setups and surrounding topographic features. For a uniform open sea terrain, wind direction veered logarithmically with height from the surface level up to the free atmospheric altitude of about 1200 m. The accumulated veering angle within the whole boundary layer was observed to be $30^{\circ}$. Mean wind direction under other terrain conditions also increased logarithmically with height above 500 m with a trend of rougher exposures corresponding to lager veering angles. A number of empirical parameters for engineering applications were presented, including the speed adjustment factors, power exponents of speed profiles, and veering angle, etc. The objective of this study aims to provide useful information on boundary layer wind characteristics for wind-resistant design of high-rise structures in coastal areas.