• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.4
• /
• pp.491-497
• /
• 2015

In this paper a method of design and Implementation of RFID based control system for reducing standby power consumption at the power outlet is described. The system is composed of a RF controlled power outlet having relay and an active RFID tag communicating with the RF reader module controlling the relay. When the tag carried by human approaches to the RF reader the reader recognizes the tag and switch off the relay based on the RSSI level measurement. A low power packet prediction algorithm has been used to decrease the DC power consumption at both the tag and the RF reader. The result of experiment shows that successful operation of the relay control has been obtained while low power operation of the tag and the reader is achieved using above algorithm. Also setting the distance between the reader and the tag by controlling transmission power of the tag and adjusting the duty cycle of the packet waiting time when the reader is in idle state allows us to reduce DC power consumption at both the reader and the tag.

• ETRI Journal
• /
• v.36 no.3
• /
• pp.352-360
• /
• 2014

This paper presents a 900 MHz zero-IF RF transceiver for IEEE 802.15.4g Smart Utility Networks OFDM systems. The proposed RF transceiver comprises an RF front end, a Tx baseband analog circuit, an Rx baseband analog circuit, and a ${\Delta}{\Sigma}$ fractional-N frequency synthesizer. In the RF front end, re-use of a matching network reduces the chip size of the RF transceiver. Since a T/Rx switch is implemented only at the input of the low noise amplifier, the driver amplifier can deliver its output power to an antenna without any signal loss; thus, leading to a low dc power consumption. The proposed current-driven passive mixer in Rx and voltage-mode passive mixer in Tx can mitigate the IQ crosstalk problem, while maintaining 50% duty-cycle in local oscillator clocks. The overall Rx-baseband circuits can provide a voltage gain of 70 dB with a 1 dB gain control step. The proposed RF transceiver is implemented in a $0.18{\mu}$ CMOS technology and consumes 37 mA in Tx mode and 38 mA in Rx mode from a 1.8 V supply voltage. The fabricated chip shows a Tx average power of -2 dBm, a sensitivity level of -103 dBm at 100 Kbps with PER < 1%, an Rx input $P_{1dB}$ of -11 dBm, and an Rx input IP3 of -2.3 dBm.

• Korean Journal of Biological Psychiatry
• /
• v.10 no.2
• /
• pp.141-146
• /
• 2003

Objective:To find out the optimal assessment that can relieve amenorrhea associated with risperidone. Methods:Sixteen female outpatients who have taken risperidone for more than 3 months reported voluntarily amenorrhea during Nov 2001 to May 2002. Since the reports of the amenorrhea, the resolution of amenorrhea has been prospectively followed during the next six months. The dosage of risperidone was reduced or discontinued in nine of sixteen patients, while risperidone was switched to olanzapine or quetiapine in other 7 patients according to the clinician's decision. Results:Fourteen of 16 patients showed higher levels of prolactin than normal level. Five patients of the risperidone-reduction group recovered from the amenorrhea while all subjects of the drug-switch group recovered. The resolved patients of the former group recovered from amenorrhea in the dosage below 3mg per day of risperidone. Two patients of the risperidone-reduction group were dropped out during the reduction. Conclusion:These findings suggest that risperidone-induced amenorrhea may be alleviated by reducing dosage to less 3mg per day(including discontinuation) or by switching to other antipsychotic drugs. Whether we would choose which method depends on patient's clinical status, diagnosis, and dose of medication and so on.

• Journal of Sensor Science and Technology
• /
• v.23 no.5
• /
• pp.332-336
• /
• 2014

In this paper, we propose a complementary metal oxide semiconductor (CMOS) binary image sensor with a gate/body-tied (GBT) PMOSFET-type photodetector for high-speed operation. The GBT photodetector of an active pixel sensor (APS) consists of a floating gate ($n^+$-polysilicon) tied to the body (n-well) of the PMOSFET. The p-n junction photodiode that is used in a conventional APS has a good dynamic range but low photosensitivity. On the other hand, a high-gain GBT photodetector has a high level of photosensitivity but a narrow dynamic range. In addition, the pixel size of the GBT photodetector APS is less than that of the conventional photodiode APS because of its use of a PMOSFET-type photodetector, enabling increased image resolution. A CMOS binary image sensor can be designed with simple circuits, as a complex analog to digital converter (ADC) is not required for binary processing. Because of this feature, the binary image sensor has low power consumption and high speed, with the ability to switch back and forth between a binary mode and an analog mode. The proposed CMOS binary image sensor was simulated and designed using a standard CMOS $0.18{\mu}m$ process.

• Journal of Microbiology and Biotechnology
• /
• v.9 no.1
• /
• pp.70-77
• /
• 1999

An extremely cadmium-tolerant budding yeast, Hansenula anomala B-7 underwent a morphological switch in response to either heat shock treatment or cadmium stress, respectively. It exhibited a morphological transition from a unicellular yeast form to a pseudohyphae-like coagulation when subjected to prolonged heat shock treatment. In contrast, the yeast cells showed an irregularity in surface morphology when given thermal stress for a short time. Patterns of proteins expressed in the pseudohyphae-like cells demonstrated that several proteins were overexpressed while others were underexpressed in comparison with those prepared from the cells in the yeast form. It was a striking feature, however, that nearly 40％ of the proteins extracted from the cells in the pseudohyphae form appeared to be composed of a single polypeptide. This polypeptide was apparently overexpressed during the pseudohyphae phase and its molecular weight was estimated to be 58 kDa according to SDS-PAGE analysis. However, a significant level of the protein was not observed in the cells before transition to pseudohyphae. The architecture of the cell shape was also damaged when incubated in a medium containing more than 1,000 ppm (8.9mM) of cadmium ions, although able to proliferate at a slow rate. However, the irregularity in the cell morphology exerted either by the brief heat shock treatment or by the cadmium stress with the high concentrations of the metal ions was not repaired, even though the damaged cells were allowed to grow for sufficient time in fresh, cadmium-free medium.

• International Journal of Human Ecology
• /
• v.8 no.2
• /
• pp.29-46
• /
• 2007

The purpose of this study was to analyze characteristics of the bedroom environment of nursing homes for the elderly in Korea. Field case research was performed using a structured checklist and measurements, from Oct. 28th to Dec. 2nd, 2006. Collected data were analyzed for cognitive efficiency, privacy, safety, supportiveness and amenity. Based on nursing homes for the elderly nationwide (Ministry of Health and Welfare, 2006), we choose 43 facilities in which Seoul and six megalopolis areas that had answered our questionnaire in 2006. We then narrowed the list to 14 facilities, balanced them in terms of regional population. The contents of investigation consisted of eight categories: that general characteristics of the bedrooms (including number of residents per room, using a bed or floor mat, the size and shape of the chamber, space for wheelchair turning, signage), door of bedroom (including door, doorknob, door sill/level difference), windows in the bedroom(including type of window, window sill height, window treatment, window safety device/shape, view/daylight), furniture (including personal furniture and lock), finishes (material, character and color of wall, floor, ceiling), lighting (including types of lighting, night lighting, switch), bathroom in the bedroom (including signage, door size/type, doorknob shape, height of the washbowl, size of toilet bowl, handrail, finishes), and other facilities (including outlet and handrails).

• Journal of Digital Contents Society
• /
• v.13 no.3
• /
• pp.335-342
• /
• 2012

The purpose of the study was to develop a computer access assessment system for improving computer access of individuals with physical disabilities for the first time in Korea. Korea-Computer Access Assessment System (K-CAAS) presented in this article tests five user skills of aim, drag, menu, scan, and switch. Skill levels of the five test areas could be set as low, middle, and high according to individuals' characteristics. All tests have their default set in each level, and skill levels can be selected and controlled by the abilities and goals of a user. Tests could be selected for users' training and their results could be traced and shown. Therefore, the K-CAAS is a training program to improve computer access skills as well as an assessing program. It would help users with physical disabilities operate a computer by themselves as improving their computer access skills.

• Journal of the Society of Disaster Information
• /
• v.10 no.4
• /
• pp.511-517
• /
• 2014

Recently, the fire by sheath heater has been occurred frequently on winter season. The sheath heater has simple internal structure and boils water simply. Therefore, the use of sheath heater has been increased. In this study, found the fire hazard property of sheath heater from understanding the fire mechanism through the experiment to get the measure for decreasing the occurrence of fire. For the analysis of the fire hazard property of the sheath heater, performed the test of temperature change and ignition temperature by using current product. On the result of test, the sheath heaters are the most dangerous appliance to arise fire. Water temperature controller attached to sheath heater is not sufficient to prevent overheating it. The sheath heater should have level switch of water and temperature controller for heater itself to shut off the power supply. Because the cause of fire by sheath heater is overheating itself in the situation of lack water.

• Journal of the korean society of oceanography
• /
• v.33 no.4
• /
• pp.185-195
• /
• 1998

Two piston cores (94PC-2 and 95PC-4) taken from the East Sea (Sea of Japan) are studied to evaluate the paleoceanographic changes and its interaction with climatic variation. The bulk geochemistry of the non-biogenic fractions of 54 sediment samples is determined using X-ray fluorescence. Four geochemical stratigraphic units at both core sediments are recognized based on the variations in major element concentration. These chemical stratigraphic units correspond well with the sedimentological and paleontological facies. Source materials are considered as basic and/or intermediate rocks judging from silica content. A distinctive boundary around 11 kyr may correspond to Younger Dryas event. The switch of most major elements at this level and the distinctive changes in concentration of typical terrigenous elements (TiO$_2$ and Al$_2$O$_3$) are the strong evidence for the difference in sources of terrigenous materials. The weathering indices exhibit high degree in Core 94PC-2 and low degree in Core 95PC-4. The changes in weathering degree can be distinguished by the lowest value occurred at 11 kyr in Core 94PC-2 and by a gradual decrease from top to bottom in Core 95PC-4. The profiles of potassium and sodium exhibit specific excursions between the Holocene and the late Pleistocene. This implies that sediments of the two cores originating from different sources with different weathering degrees. The distinct two-group distributions in K$_2$O/CaO vs. Na$_2$O/K$_2$O also support the difference in provenance of aluminosilicate materials at the boundary of 11 kyr. Thus, supply patterns of terrigenous materials are stable in Holocene and more complicated in the last glacial period.

• Journal of IKEEE
• /
• v.18 no.4
• /
• pp.586-592
• /
• 2014

In this paper, high efficiency power management IC(PMIC) with DT-CMOS(Dynamic threshold voltage Complementary MOSFET) switching device is presented. PMIC is controlled PWM control method in order to have high power efficiency at high current level. The DT-CMOS switch with low on-resistance is designed to decrease conduction loss. The control parts in Buck converter, that is, PWM control circuit consist of a saw-tooth generator, a band-gap reference(BGR) circuit, an error amplifier, comparator circuit, compensation circuit, and control block. The saw-tooth generator is made to have 1.2MHz oscillation frequency and full range of output swing from supply voltage(3.3V) to ground. The comparator is designed with two stage OP amplifier. And the error amplifier has 70dB DC gain and $64^{\circ}$ phase margin. DC-DC converter, based on current mode PWM control circuits and low on-resistance switching device, achieved the high efficiency nearly 96% at 100mA output current. And Buck converter is designed along LDO in standby mode which fewer than 1mA for high efficiency. Also, this paper proposes two protection circuit in order to ensure the reliability.