• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 춘계학술대회 논문집
• /
• pp.185-186
• /
• 2007

• 한국광학회:학술대회논문집
• /
• 한국광학회 2001년도 하계학술발표회
• /
• pp.82-83
• /
• 2001

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.748-751
• /
• 2000

Microlens made by laser radiation method have advantages in the easiness of their fabrication. The process is based on the projection of a chromium-on-quartz reticle on to the Polymer using a pulsed 248nm KrF excimer laser. Fabrication process is a fluence-dependent rate and density. The lens shape is defined by a rotationally symmetric sluence distribution with smooth radial variation in the image plane of the reticle. A typical lens of 50㎛ diameter was fabricated by irradiating 2000 laser pulses within 40 seconds. The experimental results show microlens fabrication by UV laser is possible and well worth studying further.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.743-746
• /
• 2000

Plastic microlenses play an important role in reducing the size, weight, and the cost of the systems in the fields of optical data storage and optical communication. In the present study, plastic microlens arrays were fabricated using micro-compression molding process. The design and fabrication procedures for mold insert were simplified by using silicon instead of metal. A simple but effective micro compression molding process, which uses polymer powder, were developed for microlens fabrication. The governing process parameters were temperature and pressure histories and the micromolding process was controlled such that the various defects developing during molding process were minimized. The radius and magnification ratio of the fabricated microlens were $125{\mu}m$ and over 3.0, respectively.

• 한국정밀공학회지
• /
• 제27권2호
• /
• pp.25-28
• /
• 2010

The micro fabrication on the mold material using picosecond laser ablation processing has been studied. We used the two kind of system with picosecond laser. First one is two mirror type scanner and telecentric f-theta lens. Second one is X-Y stage and objective lens. By using these system, the $100{\mu}m$ size chess patterning and $2{\mu}m$ size patterning was fabricated. Especially $2{\mu}m$ size patterning on the mold material can be used as the decorative rainbow color logo for industrial field. In this paper, it is proved the picosecond laser is effective tool for the laser ablation processing.

• 대한기계학회논문집A
• /
• 제25권8호
• /
• pp.1242-1245
• /
• 2001

Plastic microlenses play an important role in reducing the size, weight, and the cost of the systems in the fields of optical data storage and optical communication. In the present study, plastic microlens arrays were fabricated using micro-compression molding process. The design and fabrication procedures for mold insert were simplified by using silicon instead of metal. A simple but effective micro compression molding process, which uses polymer powder, were developed for microlens fabrication. The governing process parameters were temperature and pressure histories and the micromolding process was controlled such that the various defects developing during molding process were minimized. The radius and magnification ratio of the fabricated microlens were 125$\mu\textrm{m}$ and over 3.0, respectively.

• Journal of the Optical Society of Korea
• /
• 제14권2호
• /
• pp.163-169
• /
• 2010

Novel wafer-level fabrication of a glass ball-lens is realized for optoelectronic applications. A Pyrex wafer is bonded to a silicon wafer and cross-cut into a square-tile pattern, followed by wet-etching of the underlying silicon. Cubes of Pyrex on the undercut silicon are then turned into ball shapes by thermal reflow, and separated from the wafer by further etching of the silicon support. Radial variation and surface roughness are measured to be less than ${\pm}3\;{\mu}m$ and ${\pm}1\;nm$, respectively, for ball diameter of about $500\;{\mu}m$. A surface defect on the ball that is due to the silicon support is shown to be healed by using a silicon-optical-bench. Optical power-relay of the ball lens showed the maximum efficiency of 65% between two single-mode fibers on the silicon-optical-bench.

• 한국통신학회논문지
• /
• 제17권4호
• /
• pp.371-378
• /
• 1992

본 논문에서는 Y-cut $LiNbO_3$ 기판 위에 TIPE 방식을 이용하여 평면 광도파로 렌즈를 제작하고 그 특성을 측정하였다. Ti 내부확산 평면광도파로 및 TIPE 평면 광도파로 제작하고, 프리즘 결합으로 굴절율을 측정하였다. 측정한 기본파 유효굴절율로부터 평면 광도파로 렌즈의 궤적을 구하여, 사진식각법과 lift-off기법을 이용하여 TIPE 평면 광도파로 렌즈를 제작하였다. 도파로를 따라 도파되던 광이 평면 광도파로 렌즈에 의하여 접속되는 현상을 관측하였고 측정한 결과와 컴퓨터 시뮬레이션의 결과가 잘 일치함을 알 수 있었다. 관측한 초점의 위치 및 크기가 설계한 값과 잘 일치하였다.

• 소성∙가공
• /
• 제14권3호
• /
• pp.245-250
• /
• 2005

Recently, micro machining technology for high precision mold becomes more interested for mass production of high performance optical parts micro-grooved on the surface, which is under very active development due to its effectiveness in the view point of optical performance. Mechanical micro machining technology now has more competitiveness on lithography, MEMS or LIGA processes which have some problems to fabricate especially cylinder type of groove in such as lenticular lens for illumination angle modulation system. In this study. a lenticular lens mold with U-type micro groove is fabricated making utilizing of the benefit of the mechanical micro machining technology. A shaping machining process is adapted using 3 axis degree of freedom micro machining system and single crystal natural diamond tool. A brass and a electroless nickel materials are used for mold fabrication. Machining force, chip shape and machined surface are investigated from the experiment and an optimal machining condition is found based on the examined problems from the micro cutting process.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.463-463
• /
• 2006

Nowadays, subminiature lens actuators are being developed with the demand of AF lens for high performance of the mobile phone camera. Though the VCM is the current, development of new types of actuators are needed due to the structural problem and etc.. A new type of actuator for AF lens using Dielectric Elastomer Electroactive Polymer(EAP) is proposed in this paper, DE EAP has advantages in its weight, ease of fabrication and low power consumption. The mathematical model is obtained by Hamilton's principle and verified by finite element analysis and experiments. The controller is designed and evaluated by experiments.