• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.33 no.6
• /
• pp.475-483
• /
• 2015

This study examined the feasibility of using an automatic lens distortion correction (ALDC) camera as the payload for a photogrammetric unmanned aerial vehicle (UAV) system. First, lens distortion for the interior orientation (IO) parameters was estimated. Although previous studies have largely ignored decentering distortion, this study revealed that more than 50% of the distortion of the ALDC camera was caused by decentering distortion. Second, we compared the accuracy of bundle adjustment for camera calibration using three image types: raw imagery without the ALDC option; imagery corrected using lens profiles; and imagery with the ALDC option. The results of image triangulation, the digital terrain model (DTM), and the orthoimage using the IO parameters for the ALDC camera were similar to or slightly better than the results using self-calibration. These results confirm that the ALDC camera can be used in a photogrammetric UAV system using only self-calibration.

• Journal of Sensor Science and Technology
• /
• v.14 no.4
• /
• pp.278-285
• /
• 2005

This paper describes techniques of camera calibration and artificial landmarks detection for the automatic charging of a mobile robot, equipped with a fish-eye camera in the direction of its operation for movement or surveillance purposes. For its identification from the surrounding environments, three landmarks employed with infrared LEDs, were installed at the charging station. When the robot reaches a certain point, a signal is sent to the LEDs for activation, which allows the robot to easily detect the landmarks using its vision camera. To eliminate the effects of the outside light interference during the process, a difference image was generated by comparing the two images taken when the LEDs are on and off respectively. A fish-eye lens was used for the vision camera of the robot but the wide-angle lens resulted in a significant image distortion. The radial lens distortion was corrected after linear perspective projection transformation based on the pin-hole model. In the experiment, the designed system showed sensing accuracy of ${\pm}10$ mm in position and ${\pm}1^{\circ}$ in orientation at the distance of 550 mm.

• Korean Journal of Remote Sensing
• /
• v.19 no.6
• /
• pp.431-445
• /
• 2003

In this paper, we experimentally investigated the precision of 3D positioning using 4S-Van images in photograrmmetric perspective. The 3D calibration target was built over building facade outside and was captured separately by two CCD cameras installed in 4S-Van. After then, we determined the interior orientation parameter for each CCD camera through self-calibration technique. With the interior orientation parameter computed, the bundle adjustment was performed to obtain the exterior orientation parameters simultaneously for two CCD cameras using calibration target image and object coordinates. The reverse lens distortion coefficients were computed and acquired by least squares method so as to introduce lens distortion into epipolar line. It was shown that the reverse lens distortion coefficients could transform image coordinates into lens distorted image coordinates within about 0.5 pixel. The proposed semi-automatic matching scheme incorporated with lens distorted epipolar line was implemented with scene images captured by 4S-Van in moving. The experimental results showed that the precision of 3D positioning from 4S-Van images in photograrmmetric perspective is within 2cm in the range of 20m from the camera.

• Journal of the Optical Society of Korea
• /
• v.10 no.4
• /
• pp.178-183
• /
• 2006

An in-line phase-shifting digital holographic microscopy system was constructed by inserting a conventional microscope in the object arm of a Mach-Zehnder interferometer. It was used to measure the three dimensional shape of a micro Fresnel lens. It was also shown that both the lateral and the axial resolutions of the in-line phase-shifting system using a self-calibration algorithm were superior to those of the best off-axis system.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.21 no.4
• /
• pp.442-448
• /
• 2011

There are many research results about a self-localization technique of mobile robot. In this paper we present a self-localization technique based on the features of ceiling vision using a fisheye lens. The features obtained by SIFT(Scale Invariant Feature Transform) can be used to be matched between the previous image and the current image and then its optimal function is derived. The fisheye lens causes some distortion on its images naturally. So it must be calibrated by some algorithm. We here propose some methods for calibration of distorted images and design of a geometric fitness model. The proposed method is applied to laboratory and aile environment. We show its feasibility at some indoor environment.

• 한국HCI학회:학술대회논문집
• /
• 2007.02a
• /
• pp.994-999
• /
• 2007

전방향(omnidirectional) 카메라 시스템은 보다 적은 수의 영상으로부터 주변 장면(scene)에 대한 많은 정보를 취득할 수 있는 장점이 있기 때문에 전방향 영상을 이용한 자동교정(self-calibration)과 3차원 재구성 등의 연구가 활발히 진행되고 있다. 본 논문에서는 기존에 제안된 교정 방법들을 이용하여 추정된 사영모델(projection model)의 정확성을 검증하기 위한 새로운 방법이 제안된다. 실 세계에서 다양하게 존재하는 직선 성분들은 전방향 영상에 컨투어(contour)의 형태로 사영되며, 사영모델과 컨투어의 양 끝점 좌표 값을 이용하여 그 궤적을 추정할 수 있다. 추정된 컨투어의 궤적과 영상에 존재하는 컨투어와의 거리 오차(distance error)로부터 전방향 카메라의 사영모델의 정확성을 검증할 수 있다. 제안된 방법의 성능을 평가하기 위해서 구 맵핑(spherical mapping)된 합성(synthetic) 영상과 어안렌즈(fisheye lens)로 취득한 실제 영상에 대해 제안된 알고리즘을 적용하여 사영모델의 정확성을 판단하였다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.1
• /
• pp.93-100
• /
• 2008

The parameters of lens such as focal length, focus, and aperture stop changes while shooting the scenes with zoom lens. Especially, zooming action dramatically changes the geometry of lens system that causes significant change of lens model. We investigated how the lens model changes while zooming in general shooting condition. Each parameters of lens model was estimated and checked whether they can be modeled well in the condition of auto-controlling focus, aperture and vibration reduction. In order to do this, calibration images were taken, modeled in different fecal length setting. And changing patterns of models were inspected to find out if there is some elements that have some particular pattern in changing with respect to focal length. The result showed us that although we didn't control the focus and aperture setting, there's specific changing patterns in radial and do-centering distortion. Especially, the strong linear correlation was found between coefficient of $r^2$ and focal length. It is expected that many parts of distortion can be eliminated without additional self calibration even if zoom operation is done when shooting the scenes if we know its fecal length and model of this coefficient.

• Journal of Korea Game Society
• /
• v.7 no.4
• /
• pp.63-70
• /
• 2007

Since the fisheye lens has a wide field of view, it can capture the scene and illumination from all directions from far less number of omnidirectional images. Due to these advantages of the omnidirectional camera, it is widely used in surveillance and reconstruction of 3D structure of the scene In this paper, we present a new self-calibration algorithm of omnidirectional camera from uncalibrated images by considering the inlier distribution. First, one parametric non-linear projection model of omnidirectional camera is estimated with the known rotation and translation parameters. After deriving projection model, we can compute an essential matrix of the camera with unknown motions, and then determine the camera information: rotation and translations. The standard deviations are used as a quantitative measure to select a proper inlier set. The experimental results showed that we can achieve a precise estimation of the omnidirectional camera model and extrinsic parameters including rotation and translation.

• Journal of Korean Society for Geospatial Information Science
• /
• v.20 no.2
• /
• pp.93-100
• /
• 2012

The interest in 3-dimensional information and its practical use are rapidly increasing and thus some goods with stereoscopic views are being released. Mobile phones, unlike other units, are being closely utilized in everyday life and their applications are undoubtedly limitless. In this study, taking photographs with the stereo-camera of mobile phones has been accomplished and also the possibility of getting the quantitative information has been examined. In addition, this study aims to evaluate the quantitative practical use of mobile phones, evaluating the accuracy of the obtained quantitative information. Thus, interior orientation parameters were decided through the calibration of the lens of two cameras equipped with mobile phones. Using the determined interior orientation parameters, the 3-dimensional coordinates on the targets of the test field were calculated and then compared with precisely observed coordinates. Moreover, the performance of the orientation on the arbitrary building resulted in the standard deviation of $X={\pm}0.0674m$, $Y={\pm}0.25319$, and $Z={\pm}0.4983m$. The result also shows that the plot is possible. As a result, smart phones could be utilized for the acquisition of the quantitative information at close range and small measurement in which the high-accuracy on the basis of centimeters is not required.