• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.11 s.114
• /
• pp.1073-1081
• /
• 2006

In this paper, a phased array antenna based on thin-film dielectric technology at 60 GHz is designed. In order to reduce dividing/combining loss and avoid high loss of phase shifters, Rotman Lens has been employed as a feeder of antenna. The lens has 3 beam ports and 5 array ports with 2 dummy ports. The simulation for the design was performed by simulator using MoM(method of moments). The measured results of fabricated lens show magnitude deviation less than ${\pm}2dB$ and phase aberration less than ${\pm}5^{\circ}$ over $58{\sim}62GHz$. The antenna shows ${\pm}7^{\circ}$ of scan angles.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.5 s.108
• /
• pp.483-489
• /
• 2006

In this paper, new wideband lens amplifiers are proposed for C-band wireless communication service. In order to obtain the wideband property, all components of the proposed lens amplifiers are designed with balanced structure and wideband characteristics. Fat dipole antenna as the input and output antenna, balanced amplifier as amplifying components, and coplanar stripline(CPS) as the delay line fer the beam focusing are used fur composing the stable wideband lens amplifier. The $5{\times}5$ 2D lens amplifier has the characteristics that the absolute gain is 7.5 dB, the EIPG is 37.4 dB at 6 GHz, and the 3-dB gain bandwidth is 19.8 %.

• Korean Journal of Optics and Photonics
• /
• v.20 no.5
• /
• pp.294-300
• /
• 2009

To improve the output power of a photomixer as a THz source, we propose a four-leaf clover-shaped antenna structure which is composed of a highly resonant radiation element and a stable DC feed element. The resonance characteristics of the proposed structure were investigated on a half-infinite substrate first as a simplified radiation environment in order to save the computation time. Based on the antenna characteristics on a half-infinite substrate, the antenna structure was designed to have a maximum total efficiency and a maximum directivity on an extended hemispherical lens. In comparison with a full-wavelength dipole, an input resistance of this structure increased six fold and this characteristic significantly improved the mismatch efficiency between a photomixer and an antenna. THz output power from this structure is expected to increase by 2.7 times as compared to a full-wavelength dipole case.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.6
• /
• pp.1053-1060
• /
• 2019

The satellite antenna for collecting information is mainly classified into reflector antenna, lens antenna, and phased array antenna. Among them, the phased array antenna with the excellent antenna pattern control performance for a multi-beam system is frequently used. Although the terrestrial signal information collection based on the satellite is not much effected geographically, it requires the accurate angle-of-arrival (AOA) information of the interesting signal. In this paper, we discuss the characteristics and the advantages/disadvantages of the antenna array shape employed in the phased array antenna. In addition, we present the Cascade AOA estimation algorithm based on a square array antenna mounted on the satellite receiver, and show the performance evaluation results through the computer simulation.

• Journal of electromagnetic engineering and science
• /
• v.10 no.3
• /
• pp.132-137
• /
• 2010

We present results of room-temperature characterization of lithographically manufactured antenna-coupled NbN micro-bolometers. The bolometers are assembled together with a hyper-hemispherical Si lens to couple the incident radiation to the bolometer from the back-side of the substrate. The bolometers are designed to operate at 300~1,000 GHz and they are characterized at 321~782 GHz. Radiation patterns are measured at 321 GHz, 400 GHz, 654 GHz, and at 782 GHz. The frequency dependency of the beamwidth is studied with several azimuthal beam profile measurements at 321~500 GHz.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1986.04a
• /
• pp.211-214
• /
• 1986

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.53-54
• /
• 2014

By using geometrical structure of Fresnel lens, it can be applied with receiver antenna and geodetic system. In this paper, radiation pattern from fresnel lens array of Soret type is calculate by the FDTD method. For simplicity, fresnel lens should be located linearly and considered to be dielectric rod with a relative permittivity.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.3
• /
• pp.279-287
• /
• 2002

In this paper, a symmetric microwave lens to steer wide angle and to operate at broad band frequency range for a linear phased array transmitter was designed. To get accurate beam steering performance far a linear phased array transmitter, uniform amplitude transmission characteristics of microwave lens was focused. The measured result for the insertion loss deviation between Input and output ports of microstrip lens with 8 beam ports and 8 array ports was $\pm$3.1 ㏈ over 6~18 ㎓ band, which was very uniform characteristics. Using 8 elements linear array antenna, it was confirmed the radiation beam could be steered over $\pm$60$^{\circ}$ in azimuth. And the measured lens performance data and multi-beam steering pattern were presented.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.5
• /
• pp.500-506
• /
• 2002

This paper presents a design of wide angle steering microstrip Rotman lens operating over broadband frequency range for Electronic Warfare equipments. It has a compact and simple structure which it is easy to manufacture repetitively. The lens is modelled as a 2-dimension planar circuit, the contour integral method is performed over entire lens contour and the transmission coefficients from 8 beam ports to 8 array ports are found. The measured results are well agreed with those of analysis. Prediction of the multibeam array pattern fed by linear array antenna shows $\pm$65$^{\circ}$ of beam steering and $\pm$5 dB insertion loss deviation over 3:1 frequency range.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.9
• /
• pp.947-956
• /
• 2008

In this paper, miniaturized conically stepped COBRA is proposed. In order to prevent electrical breakdown, COBRA, which consists of hem and lens, has to get bigger if it is designed with conventional method. Because of the phase error increase, shortening the length of the antenna without changing the aperture size leads to the reduction of the antenna gain. To avoid this, the phase error at the aperture is compensated by transforming the COBRA lens into conically stepped form. The simulations result shows that the proposed antenna has higher gain than the conventional COBRA in spite of the size reduction from 1,300 mm to 600 mm. The fabricated and measured COBRA has the gain of 26.2 dBi.