• 한국작물학회지
• /
• 제44권2호
• /
• pp.134-137
• /
• 1999

An experiment was carried out to determine the effects of priming and growth regulator treatment of seeds on the emergence and seedling growth of rice, Oryza sativa L. (cv. 'Ilpumbyeo'). Normal seeds were primed in a -0.6 MPa polyethylene glycol solution at 15$^{\circ}C$ for four days with air-bubbling. Then both primed and non-primed seeds were soaked in water, 100 ppm GA$_3$, 2 ppm ABA, and 10 ppm kinetin solutions for 24 hours. The seeds were planted in soil at 3 and 5 cm depths and allowed to germinate in a growth cabinet at 2$0^{\circ}C$. Generally, the emergence rate at the 3 cm seeding depth was higher and emerged faster compared with the 5 cm seeding depth. The emergence rate of primed seeds was higher and emerged faster compared to non-primed seeds. GA$_3$ and kinetin treatments were the most effective to improve the emergence rate of non-primed seeds. Coleoptile length at the 5 cm seeding depth was longer than that at the 3 cm seeding depth. Leaf number, plant height, and root length of primed seedlings were higher compared with non-primed seeds. GA$_3$ promoted the elongation of plant height and mesocotyle length.

• 한국가시화정보학회지
• /
• 제21권1호
• /
• pp.94-102
• /
• 2023

Three design parameters were considered in this study: outlet nozzle angle (30°, 60°, 80°), neck length (1 mm, 3 mm), and flow rate (0.5, 0.6, 0.7, 0.8 lpm). A neck diameter of 0.5 mm induced cavitation flow at a venture nozzle. A secondary transparent chamber was connected after ejection to increase bubble duration and shape visibility. The bubble size was estimated using a Gaussian kernel function to identify bubbles in the acquired images. Data on bubble size were used to obtain Sauter's mean diameter and probability density function to obtain specific bubble state conditions. The degree of bubble generation according to the bubble size was compared for each design variable. The bubble diameter increased as the flow rate increased. The frequency of bubble generation was highest around 20 ㎛. With the same neck length, the smaller the CV number, the larger the average bubble diameter. It is possible to increase the generation frequency of smaller bubbles by the cavitation method by changing the magnification angle and length of the neck. However, if the flow rate is too large, the average bubble diameter tends to increase, so an appropriate flow rate should be selected.

• Fisheries and Aquatic Sciences
• /
• 제5권3호
• /
• pp.183-190
• /
• 2002

To determine the effect of body size on the clearance rate and ingestion rate of small intertidal bivalves, Glauconome chinensis, feeding experiments were conducted on individuals of 12 different size classes, from 4 to 16 mm in shell length. Relationships between morphological parameters were also determined. The clearance and ingestion rates of G. chinensis responded similarly to their body size, ranging from 1.3 to 28.2 mL/hr/ind. and from 24.0 to 458.5, ${\mu}gC/hr/ind$., respectively. Both rates increased significantly (p<0.001) as shell length increased from 4 to 9 mm, although neither rate changed significantly when shell length was in the range from 12 to 16 mm. The weight-specific clearance rate $(CR_w)$ and ingestion rate $(IR_w)$ decreased with increasing body size, with values from 1.0 to 3.1 L/hr/g and from 17.9 to 51.3 mgC/hr/g, respectively. The $CR_w$ of G. chinensis was intermediate compared to those of larger bivalve species. The clearance rate (CR) relative to flesh dry weight (FDW) of G. chinensis were fitted well to the power function: $CR=0.43\times(FDW)^{0.71}\;(r^2=0.89)$. The exponent of fitting equation (0.71) of G. chinensis was higher than those of Mytilus edulis (Walne, 1972), Crassostrea gigas (Walne, 1972), and Placopecten magellanicus (MacDonald and Thompson, 1986).

• Journal of Ecology and Environment
• /
• 제29권5호
• /
• pp.461-467
• /
• 2006

The growth pattern and the seasonal changes in nutrient contents of Humulus japonicus were investigated. Stem length of H. japonicus reached the maximum from 240 to 260 Julian date and the median value was found at 255 Julian date. The maximum leaf area was observed from 235 to 248 Julian date and the median value was at 240 Julian date. The maximum growth rate of the stem length ranged from 205 to 227 Julian date. The leaf area showed the maximum growth rate from 196 to 214 Julian date. The median date in the growth rate of the stem length and leaf area was 212 and 205 Julian date, respectively. The growth rate of H. japonicus was related to rainy season and precipitation. Phosphorus and sodium contents of H. japonicus were correlated with maximum potential rate of relative growth. Although stem biomass of H. japonicus was $ 1.5{\sim}3.5$ times larger than that of leaf, N content of the leaf ($4.48{\sim}5.27%$) was about 2 times higher than that of the stem ($2.00{\sim}3.62%$). High content of N might be responsible for the high growth rate of H. japonicus in summer. This result provides valuable information for appropriate timing for the removal of H. japonicus.

• Journal of Animal Science and Technology
• /
• 제54권6호
• /
• pp.395-400
• /
• 2012

This study was conducted to estimate the growth curve parameters for the body weight (BW) and body length (BL) of miniature pigs in Korea. Growth curve parameters were estimated through a nonlinear regression model using Gompertz, Logistic, and von Bertalanffy methods. A total of 25 piglets were measured monthly from birth up to 15 months of age to estimate both body weight and length. Results showed that the estimated average values for the body weight (body length) were 31.83 kg (58.77 cm) for the mature weight (A), 3.06 (1.74) for the growth ratio (${\beta}$), and 0.28 (0.52) for the maturing rate (${\kappa}$). Average inflection points showing maximum growth rate estimated each month for body weight were 3.97 kg and 11.70 cm, while for the body length were 1.06 kg and 21.61 cm. Moreover, the estimated maturation rates of the body weight and length for the group of Sire 1 were 0.22 and 0.40 respectively, whereas for the group of Sire 2 these values were 0.34 and 0.39. On the other hand, for the groups of Dam 1, Dam 2, and Dam 3, maturation rates for their body weights were 0.26, 0.28 and 0.33 respectively, while for their body lengths these values were 0.43, 0.37, and 0.38, respectively. The study also indicated a negative relationship between the values of mature weight and maturity rate for the body weight will result to a higher inflection point which is in contrast for the body length where results show that a positive relationship between the values of mature length and the maturity rate will result to a higher inflection point. Furthermore, the growth performance of miniature pig varies across stages but using these estimated growth curve parameters could improve the genetic traits of miniature pig.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 춘계학술대회 논문집
• /
• pp.121-127
• /
• 2003

Wave overtopping is one of the most important hydraulic responses of breakwater because it significantly affects its functional efficiency, the safety of transit and mooring on the rear side, wave transmission in the sheltered area, rear side armor stones and to some extent, the structural safety itself. In this study, hydraulic model tests has been carried out to investigate the influence of berm's size on overtopping rate by maximum overtopping rate and mean overtopping rate. The hydrodynamic characteristics of berm breakwater by the overtopping rate can be summarized as follows: 1. It is better to use maximum overtopping rate than to use mean overtopping rate for design of coastal structures in the point of view of stability. 2. When construct berm to decrease energy of waves that it was needed to make breaking conditions of wave on the berm. 3. Under the relative length of berm was over 0.13 overtopping rate was significantly decreased. 4. Overtopping rate affected significantly by the relative length of yhe berm than height of the berm.

• 핵의학기술
• /
• 제21권1호
• /
• pp.70-75
• /
• 2017

방사성 요오드 갑상선 섭취율 검사는 방사성 요오드를 투여하고 일정 시간 후 갑상선의 요오드 방사능치를 측정하여 전반적인 기능 상태를 알아보는 검사법이다. 검사에 영향을 미치는 인자는 매우 다양하다. 본 연구에서는 갑상선의 길이나 두께, 부피에 따른 기하학적 요인이 계수율에 주는 영향을 관찰하고자 한다. 액체상태의 $^{131}I\;185kBq$ ($5{\mu}Ci$)을 지름이 0.5, 1, 1.5, 3 cm 인 주사기에 넣고 길이를 1 cm 간격으로 생리식염수를 추가하여 증가시켰다. 선원을 장비로부터 25 cm 거리에서 횡축방향과 종축방향으로 위치하였을 때 각각의 계수율을 측정하였다. 횡축 방향으로 위치하였을 때, 선원의 길이가 변화하여도 대부분 유의한 차이를 보이지 않았다. 종축 방향으로 위치하였을 때, 곡선추정 회귀분석 결과 복합모형곡선과 높은 상관관계를 보였고($$R^2{\geq_-}0.941$$), 선원의 길이가 증가할수록 계수율은 감소하였다. 따라서 갑상선 섭취율 검사 시, 갑상선의 가로나 세로 방향의 차이에 따른 섭취율의 오차는 적을 것으로 예상되어 지며, 단순한 부피의 차이보다 갑상선의 두께 및 투여 전 선량측정 시의 비커에 따라서 오차가 생길 수 있다고 예상된다. 따라서 오차를 줄이기 위해서는 초음파 등의 영상을 참고하여 두께를 구해 섭취율 수치에 적용하거나, 결과에서 구한 복합방정식을 통해 오차를 예측, 갑상선과 섭취율 장비의 거리를 변화시킨다면 비교적 정확한 계수율을 구할 수 있을 거라 사료 된다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(3)
• /
• pp.109-112
• /
• 2000

The EPRCA(Enhanced Proportional Rate Control Algorithm) is one of the explicit rate control algorithm recommended by the ATM forum. EPRCA algorithm is using only two threshold to buffer change is not considered for calculating ER value. In this paper to cover the shortage, two more variables are added for considering increase of buffer quantity. So calculating proper ER would avoid before getting into the congestion situation. To analysis the affect, EPRCA and proposed algorithm are compared through simulation by analysis of change of buffer length and ACR change

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제12권1호
• /
• pp.25-32
• /
• 2008

A pin fin is optimized based on the increasing rate of heat loss by using a two-dimensional analytic method. The optimum heat loss, corresponding optimum thermal resistance and fin length are presented as a function of the fin base thickness, convection characteristic numbers ratio, fin outer radius and ambient convection characteristic number. One of the results shows that both the optimum heat loss and fin length decrease linearly whereas the optimum thermal resistance increases very slightly with increase of the fin base thickness.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제13권3호
• /
• pp.145-151
• /
• 2005

A thermally asymmetric straight rectangular fin is analysed and optimized using the two-dimensional separation of variables method. The optimum heat loss is presented as a function of bottom to top Biot number ratio, fin base length and top Biot number. Decreasing rate of the optimum fin length with the increase of the fin base length is listed. The optimum fin tip length is shown as a function of bottom to top Biot number ratio, fin base length and tip to top Biot number ratio. One of the results shows that the optimum heat loss and the actual optimum fin length decrease while the optimum fin tip length increases as the fin base length increases.