• JSTS:Journal of Semiconductor Technology and Science
• /
• 제6권3호
• /
• pp.210-224
• /
• 2006

A new analytical model for the static I-V characteristics of GaAs MESFET’s under optically controlled conditions in both linear and saturation region is presented in this paper. The novelty of the model lies in characterizing both photovoltaic (external, internal) and photoconductive effects. Deep level traps in the semi insulating GaAs substrate are also included in this model. Finally, effect of backgate voltage on I-V characteristics is explained analytically for the first time in literature. Small signal parameters of GaAs MESFET are derived under both dark and illuminated conditions. Some of the results are compared with reported experimental results to show the validity of the proposed model. Since accurate dc modeling is the key to accurate ac modeling, this model is very useful in the designing of photonic MMIC’s and OEIC’s using GaAs MESFET.

• 한국정보통신학회논문지
• /
• 제12권1호
• /
• pp.189-195
• /
• 2008

WiMAX 표준인 IEEE 802.16e의 OFDMA 물리 계층에서는 채널 환경과 다양한 전송 성능의 요구에 부응하기 위해서 다양한 부호율과 부호 길이를 갖는 총 114가지의 가변 LDPC 부호를 정의하고 있다. 본 논문에서는 AWGN 채널에서 Min-Sum 복호 알고리즘을 사용한 시뮬레이션을 통해 부호율 및 부호 길이에 따른 LDPC 부호들의 성능을 평가한다. 부호율은 감소하고 부호의 길이는 증가할수록 우수한 성능을 보임을 확인할 수 있었다. 특히 각각 동일한 부호율에 대해 2가지의 LDPC 부호가 정 의 되 어 있는 2/3과 3/4의 부호율의 경우는 2/3A와 3/4B이 2/3B와 3/4A보다 우수한 성능을 보임을 확인하였다. 또한 반복횟수의 통계적 분석을 통한 반복횟수의 확률밀도함수를 통해 복호 복잡도를 파악하고, WER 성능을 추정하였다. 이상의 결과는 LDPC 복호기의 설계에서 부호의 성능과 복호 복잡도간의 절충을 위해 사용될 수 있다.

• Journal of Communications and Networks
• /
• 제13권3호
• /
• pp.205-210
• /
• 2011

This paper presents an approach to the construction of multiple-rate quasi-cyclic low-density parity-check (LDPC) codes. Parity-check matrices of the proposed codes consist of $q{\times}q$ square submatrices. The block rows and block columns of the parity-check matrix correspond to the hyperplanes (${\mu}$-fiats) and points in Euclidean geometries, respectively. By decomposing the ${\mu}$-fiats, we obtain LDPC codes of different code rates and a constant code length. The code performance is investigated in term of the bit error rate and compared with those of LDPC codes given in IEEE standards. Simulation results show that our codes perform very well and have low error floors over the additive white Gaussian noise channel.

• 전기전자학회논문지
• /
• 제2권2호
• /
• pp.212-224
• /
• 1998

DS/CDMA 시스템의 순방향 링크에서 시스템의 성능을 열화 시키는 주요 원인으로는 다중 경로 전파에 의한 페이딩과 많은 사용자가 동시에 동일 주파수 대역을 사용함으로써 발생하는 다원 접속 간섭이 있다. 다중 경로 전파에 의한 다원 접속 간섭을 줄이기 위해서는 각각의 사용자들을 구별하게 하는 코드들 사이의 상호 상관 성질을 최소화시키는 PN 코드를 필요로 한다. IS-95A 시스템의 변조 방법에서 데이터의 대역 확산을 위해 전체 주기 $2^{15}$의 PN 시퀀스를 사용하며, 데이터 비트를 확산시키기 위해 PN 시퀀스 전체 길이 중 각각 64칩씩 사용된다. 이러한 경우, 실제 사용되는 비트는 전체 데이터에서 차지하는 비중이 아주 작아 상호 상관 성질이 상대적으로 커져 다중 경로 간섭을 억제하는데 있어 만족스럽지 못한 결과를 얻게된다. 이러한 점을 착안하여 순방향 링크의 복조 구간을 증가시켜 데이터를 복조 한다면 코드들간의 상호 상관 성질을 줄일 수 있다. 본 논문에서는 PN 코드들간의 상호 상관 성질을 감소시킬 수 있는 복조방법을 제안하고, 시뮬레이션을 통하여 검증하였다. 시뮬레이션에 사용된 채널은 다중 경로 레일리 페이딩 채널 및 부가 백색 가우시안 잡음 채널을 사용하였다. 제안된 방법은 시뮬레이션을 통해 성능 분석한 후, 기존의 IS-95A 시스템과 비교하여 동일 신호대 잡음비에서 비트 오율이 약 $0.25{\sim}0.5dB$의 성능 향상을 보였다.

• 대한전자공학회논문지
• /
• 제27권12호
• /
• pp.1792-1799
• /
• 1990

Two cases of block coded phase/frequncy modulations are investigated. minimum Euclidean distances are calculated as the function of modulation index h and rotation angle \ulcorner in the cases of 2-FSK/4-PSK and 2-FSK/8-PSK. Method of signal set partitioning is described, especially for the case of 2-FSK/8-PSK. The results are compared with S.I. Sayegh's work and shown better performance. For example, with simple parity check and repetition codes, we can get coding gain of 3 dB in the case of 2-FSK/4-PSK with block length n=4. We get 5.33 dB in the case of 2-FSK/8-PSK with n=4. And it is believed that we can get higher coding gain with proper combinations of block code and n-FSK/m-PSK type channel signal constellations.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.641-644
• /
• 2009

We demonstrated a solvent-assisted soft-lithographic patterning method for producing patterned structure and patterned ordering with lyotropic liquid crystalline polymer (LCP) film. Experimental results showed that the liquid crystalline ordering of lyotropic film could be controlled by shearing effects of the fluidic solvent though the patterned mold channels. In this work, two types of lyotropic LCPs were used to investigate the effects of the alkyl chain length of the lyotropic LCP on producing liquid crystalline ordering through the solvent-assisted fluidic patterning.

• 수산해양교육연구
• /
• 제10권1호
• /
• pp.1-14
• /
• 1998

Transportation provides an infrastructure vital to economic growth, and it is also an integral part of production. As a port is regarded as the interface between the maritime transport and domestic transport sectors, it certainly play a key role in any economic development. Ship's delay caused by port congestion has recently has recently attracted attended with the analysis of overall operation in port. In order to analyse complicated port operation which contains large number of variable factors, queueing theory is needed to be adopted, which is applicable to a large scale transportation system in chiding ship's delay in Inchon port in relation to ship's delay problem. The overall findings are as follows ; 1. The stucture of queueing model in this port can be represented as a complex of multi-channel single-phase 2. Ship's arrival and service pattern were Poisson Input Erlangian Service. 3. The suitable formula to calculate the mean delay in this port, namely, $W_q={\frac{{\rho}}{{\lambda}(1-{\rho})}}{\frac{e{\small{N}}({\rho}{\cdot}N)}{D_{N-1}({\rho}{\cdot}N)}}$ Where, ${\lambda}$ : mean arrival rate ${\mu}$ : mean servicing rate N : number of servicing channel ${\rho}$ : utilization rate (l/Nm) $e{\small{N}}$ : the Poisson function $D_{(n-1)}$ : a function of the cumulative Poisson function 4. The utility rate is 95.0 percents in general piers, 75.39 percents in container piers, and watiting time 28.43 hours in general piers, 13.67 hours in container piers, and the length of queue is 6.17 ships in general piers, 0.93 ships in container piers, and the ship turnaround time is 107.03 hours in general piers, 51.93 hours in container piers.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2672-2677
• /
• 2007

An investigation of low Reynolds number flow in nozzles and diffusers which are widely used in the valveless micropump is presented. Flow characteristics in the nozzle and diffuser are explained in view of viscous effect and flow oscillation induced by pumping membrane. These calculation results show that the rectification property of valveless micropump is due to a flow separation in the diffuser and the separation is largely originated from the flow oscillation. Under the assumptions of steady flow velocity profile and flow separation in the diffuser, simplified analytical models are provided to see the dependency of rectification on the micropump geometry. Geometric parameters of channel length, nozzle throat, chamber size, and converging/diverging angle are depicted through the analytical models in low Reynolds number flow, and the prediction and experimental results are compared. This theoretical study can be used to determine the optimum geometry of valveless micropump.

• 대한기계학회논문집B
• /
• 제27권8호
• /
• pp.1097-1104
• /
• 2003

The current study analyzes Langmuir slip boundary condition theoretically and it is tested in practical numerical analysis for separation-associated flow. Slip phenomenon at the channel wall is properly implemented by various numerical slip boundary conditions including Langmuir slip model. Compressible backward-facing step flow is compared to other analysis results with the purpose of diatomic gas Langmuir slip model validation. The numerical solutions of pressure and velocity distributions where separation occurs are in good agreement with other numerical results. Numerical analysis is conducted for Reynolds number from 10 to 60 for a prediction of separation at T-shaped micro manifold. Reattachment length of flows shows nonlinear distribution at the wall of side branch. The Langmuir slip model predicts fairly the physics in terms of slip effect and separation.

• 설비공학논문집
• /
• 제18권10호
• /
• pp.811-818
• /
• 2006

Mixing vanes have been installed in the space grid of nuclear fuel rod bundle to improve turbulent heat transfer. Split mixing vanes induce the vortex flow in the cooling water to swirl in sub-channel of fuel assembly. But, The swirling flow decays rapidly so that the heat transfer enhancing effect limited to short length after the mixing vane. In the present study, the large scale vortex flow (LSVF) is generated by rearranging the mixing vanes to the coordinated directions. This LSVF mixing vanes generate the most strong secondary flow vortices which maintain about $35D_h$ after the spacer grid. The streamwise vorticity generated by LSVF sustain two times more than that split mixing vane.