• 정보학연구
• /
• 제5권4호
• /
• pp.1-8
• /
• 2002

본 연구는 저압 전력선에서의 데이터 통신에 적합한 변조 방식으로 주목받고 있는 다중 반송 변조의 일종인 OFDM(Orthogonal Frequency Division Multiplexing)의 변조를 실험하고, 이들 데이터를 전달 할 매체인 전력선을 채널 모델링 하였다. 전력선은 각종 전자기기에 의해 분기 연결되어 지연 전파의 경우와 임펄스성 잡음원이 존재하는 것으로 알려져 있다. 반송 주파수와 전력선의 길이에 의해 주파수 선택적 페이딩이 발생함을 알 수 있다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2004년도 SMICS 2004 International Symposium on Maritime and Communication Sciences
• /
• pp.53-56
• /
• 2004

The a-Si:H TFT using ferroelectric of SrTi $O_3$as a gate insulator is fabricated on glass. Dielectric characteristics of ferroelectric are superior to $SiO_2$and S $i_3$ $N_4$. Ferroelctric increases on-current, decreases thresh old voltage of TFT and also improves breakdown characteristics. The a-SiN:H has optical band gap of 2.61 eV, refractive index of 1.8~2.0 and resistivity of 10$^{13}$ - 10$^{15}$ $\Omega$cm, respectively. Insulating characteristics of ferroelectrics are excellent because dielectric constant of ferroelectric is about 60~100 and breakdown strength is over 1MV/cm. TFT using ferroelectric has channel length of 8~20${\mu}{\textrm}{m}$ and channel width of 80~200${\mu}{\textrm}{m}$. And it shows that drain current is 3.4$mutextrm{A}$ at 20 gate voltage, $I_{on}$ / $I_{off}$ is a ratio of 10$^{5}$ - 10$^{8}$ and $V_{th}$ is 4~5 volts, respectively. In the case of TFT without ferroelectric, it indicates that the drain current is 1.5 $mutextrm{A}$ at 20 gate voltage and $V_{th}$ is 5~6 volts. With the improvement of the ferroelectric thin film properties, the performance of TFT using this ferroelectric has advanced as a gate insulator fabrication technology is realized.zed.d.

• 한국통신학회논문지
• /
• 제25권1A호
• /
• pp.74-80
• /
• 2000

본 논문에서는 초고속 통신망의 대안기술로 부각되고 있는 HFC 전속망을 기본 전송망으로 하는 CATV/LAN망에서 새로운 MAC프로토콜을 제안하고 성능해석을 수행하였다. CATV/LAN 전송망에서 주요 해석의 대상인 상향채널은 단방향 채널 특성과 단말의 위치에 따라서 우선적으로 접속되는 특성이 발생한다. 이런 전송망에서 공정성 문제를 해결하기 위하여 전송할 데이터가 발생하면 그 즉시 데이터를 전송하지 않고 Pi확률로 데이터를 전송하는 CSMA-CD/U/P(Unsoltted Pi-persistent CSMA-CD)프로토콜을 제안한다. 성능해석과 시뮬레이션 결과 전송망에서 공정성을 이루는 데이터 전송 확률값인 Pi의 분포를 구하였으며, 전송망의 공정성이 이루어 졌을 때 평균 지연 시간(mean delay time)을 구했다. 또한, 지연시간의 분산값을 구하였으며 단말의 버퍼큐에서 큐길이(queue length)분포도 구하였다. 평균 지연 시간과 큐길이 분포는 부하가 커질수록, 단말의 수가 많아 질수록 증가 하는 양상을 보인다.

• 한국항행학회논문지
• /
• 제21권6호
• /
• pp.659-665
• /
• 2017

본 논문에서는 MIMO(multiple input multiple output) 시스템을 위한 저복잡도 FFT(fast Fourier transform) 프로세서의 설계 및 구현 결과를 제시하였다. 무선랜을 이용한 다양한 멀티미디어 서비스 등을 이용하기 위해 높은 채널 용량과 Gbps급 전송이 가능한 시스템에 대한 요구와 함께 IEEE 802.11ac 규격이 채택되었다. MIMO-OFDM (orthogonal frequency duplex multiplexing) 기술을 사용하는 IEEE 802.11ac 규격의 무선랜 시스템은 최대 8개의 안테나 구성 및 20-160 MHz 대역폭을 지원해야한다. 따라서, 제안된 FFT 프로세서는 8채널 64, 128, 256, 512 point 가변길이를 지원한다. 또한, 비단순 승산기의 수를 감소시키기 위해서 MRMDC(mixed-radix multipath delay commutator) 구조를 적용하였고, 이로 인해 제안된 FFT 프로세서는 기존 FFT 프로세서에 비해 현저히 낮은 복잡도로 구현 가능하다. 구현 결과, 제안된 FFT processor는 기존 방식인 radix-2 SDF 구조 대비 gate count가 50 % 감소 가능하였고, 8 채널 MR-2/2/2/4/2/4/2 MDC 구조와 8채널 MR-2/2/2/8/8 MDC 구조 대비 logic gate 수를 각각 18 %와 17 % 감소 가능함이 확인되었다.

• 대한전자공학회논문지SD
• /
• 제41권11호
• /
• pp.29-34
• /
• 2004

본 논문에서는 molecular beam epitaxy (MBE)로 성장한 AlGaN/InGaN/GaN high electron-mobility transistors (HEMTs)의 선형성과 RF dispersion 특성을 조사하였다. 전극 길이가 0.5 ㎛인 AlGaN/InGaN HEMT는 최대 전류 밀도가 730mA/mm, 최대 전달정수가 156 mS/mm인 비교적 우수한 DC 특성과 함께, 기존의 AlGaN/GaN HEMT와는 달리 높은 게이트 전압에도 완만한 전류 전달 특성을 보여 선형성이 우수함을 나타내었다. 또한 여러 다른 온도에서 측정한 펄스 전류 특성에서 소자 표면에 존재하는 트랩에 의한 전류 와해 (current collapse) 현상이 발생되지 않음을 확인하였다. 이 연구 결과는 InGaN를 채널층으로 하는 GaN HEMT의 경우 선형성이 우수하고, 고전압 RF 동작조건에서 출력저하가 발생하지 않는 고출력 소자를 제작할 수 있음을 보여준다.

• 대한기계학회논문집
• /
• 제19권7호
• /
• pp.1675-1683
• /
• 1995

A numerical study of the fluid flow and heat transfer characteristics of the two-dimensional impingement jet with a confinement plate has been carried out. The fluid flow was calculated by solving the full Navier-Stokes equation. In doing that, the well known SIMPLER algorithm was used and the trouble making convection term was discretized according to QUICKER scheme. The energy equation was simply solved by using the SOR method. For the Reynolds number of 10000, two channel heights, say 1.5 and 3.0 times the jet exit width, and two thermal boundary conditions constant wall temperature and constant wall heat flux were considered. Discrete heat sources were flush mounted along the impingement plate at a distance of 0, 2, 3, 4, 5, 6, 10, 12, times the jet exit width from the stagnation point. The length of each heat source is 4 times the jet exit width long. The Nusselt number averaged over each heat source was compared with experiment. Comparison shows that both calculations and experiment have the secondary peak of Nusselt number at downstream of stagnation point, even though there is a little quantitative difference in between. The difference is believed due to abscure thermal boundary condition in experiment and also accuracy of turbulence model used. The secondary peak is shown to be caused by rigorous turbulent flow motion generated as the wall jet flow is retarded and developes into the channel flow without flow reversal.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제6권6호
• /
• pp.1522-1545
• /
• 2012

Call admission control (CAC) plays an important role in mobile cellular network to guarantee the quality of service (QoS). In this paper, a dynamic hybrid CAC scheme with integrated cutoff priority and handoff queue for mobile cellular network is proposed and some performance metrics are derived. The unique characteristic of the proposed CAC scheme is that it can support any number of service types and that the cutoff thresholds for handoff calls are dynamically adjusted according to the number of service types and service priority index. Moreover, timeouts of handoff calls in queues are also considered in our scheme. By modeling the proposed CAC scheme with a one-dimensional Markov chain (1DMC), some performance metrics are derived, which include new call blocking probability ($P_{nb}$), forced termination probability (PF), average queue length, average waiting time in queue, offered traffic utilization, wireless channel utilization and system performance which is defined as the ratio of channel utilization to Grade of Service (GoS) cost function. In order to validate the correctness of the derived analytical performance metrics, simulation is performed. It is shown that simulation results match closely with the derived analytic results in terms of $P_{nb}$ and PF. And then, to show the advantage of 1DMC modeling for the performance analysis of our proposed CAC scheme, the computing complexity of multi-dimensional Markov chain (MDMC) modeling in performance analysis is analyzed in detail. It is indicated that state-space cardinality, which reflects the computing complexity of MDMC, increases exponentially with the number of service types and total channels in a cell. However, the state-space cardinality of our 1DMC model for performance analysis is unrelated to the number of service types and is determined by total number of channels and queue capacity of the highest priority service in a cell. At last, the performance comparison between our CAC scheme and Mahmoud ASH's scheme is carried out. The results show that our CAC scheme performs well to some extend.

• 대한전자공학회논문지TC
• /
• 제44권10호
• /
• pp.156-161
• /
• 2007

본 논문에서는 이동 통신 환경에서 데이터율을 높이기 위해 현재 사용되는 변조 방식보다 고차원의 변조방식에 대한 성능을 비교 분석하였다. 기존에 주로 사용되던 정사각형 형태의 QAM은 BER 성능 면에서는 다른 변조 방식에 비해 우수한 특성을 보이나 진폭의 수가 증가함에 따라 송수신 신호의 다이나믹 레인지가 증가하여 증폭기의 선택에 제한이 생기고, 증폭 과정에서의 에러 발생률이 증가하게 된다. 그러나 본 논문에서 제안하는 APSK 방식의 변조 방식은 기존의 QAM에 비해 미미한 성능 저하를 보이지만 송수신 신호의 다이나믹 레인지 면에서 이득을 얻을 수 있기 때문에 특히 CDMA나 OFDM과 같이 여러 신호가 합의 형태로 송수신되는 시스템에 제한된 범위의 고차원의 변조 방식으로 성능의 유효성이 있다. 또한 이 경우 저력 효율이 좋은 비선형성 증폭기의 사용이 가능하기 때문에 시스템 면에서도 큰 이득이 예상된다.

• 센서학회지
• /
• 제27권3호
• /
• pp.204-208
• /
• 2018

Monolayer graphene grown via chemical vapor deposition (CVD) is recognized as a promising material for sensor applications owing to its extremely large surface-to-volume ratio and outstanding electrical properties, as well as the fact that it can be easily transferred onto arbitrary substrates on a large-scale. However, the Dirac voltage of CVD-graphene devices fabricated with transferred graphene layers typically exhibit positive shifts arising from transfer and photolithography residues on the graphene surface. Furthermore, the Dirac voltage is dependent on the channel lengths because of the effect of metal-graphene contacts. Thus, large and nonuniform Dirac voltage of the transferred graphene is a critical issue in the fabrication of graphene-based sensor devices. In this work, we propose a fabrication process for graphene field-effect transistors with Dirac voltages close to zero. A vacuum annealing process at $300^{\circ}C$ was performed to eliminate the positive shift and channel-length-dependence of the Dirac voltage. In addition, the annealing process improved the carrier mobility of electrons and holes significantly by removing the residues on the graphene layer and reducing the effect of metal-graphene contacts. Uniform and close to zero Dirac voltage is crucial for the uniformity and low-power/voltage operation for sensor applications. Thus, the current study is expected to contribute significantly to the development of graphene-based practical sensor devices.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.530-533
• /
• 2010

This paper presents numerical analysis and design optimization of various turbine blade cooling techniques with three-dimensional Reynolds-averaged Navier-Stokes(RANS) analysis. The fluid flow and heat transfer have been performed using ANSYS-CFX 11.0. A fan-shaped hole for film-cooling has been carried out to improve film-cooling effectiveness with the radial basis neural network method. The injection angle of hole, lateral expansion angle of hole and ratio of length-to-diameter of the hole are chosen as design variables and spatially averaged film-cooling effectiveness is considered as an objective function which is to be maximized. The impingement jet cooling has been performed to investigate heat transfer characteristic with geometry variables. Distance between jet nozzle exit and impingement plate, inclination of nozzle and aspect ratio of nozzle hole are considered as geometry variables. The area averaged Nusselt number is evaluated each geometry variables. A rotating rectangular channel with staggered array pin-fins has been investigated to increase heat transfer performance ad to decrease friction loss using KRG modeling. Two non-dimensional variables, the ratio of the eight diameter of the pin-fins and ratio of the spacing between the pin-fins to diameter of the pin-fins selected as design variables. A rotating rectangular channel with staggered dimples on opposite walls are formulated numerically to enhance heat transfer performance. The ratio of the dimple depth and dimple diameter are selected as geometry variables.